Specialty Groups: Tube DIY Asylum   Tech Square

Previous Page   View: Threads   eThreads   Sort: Date   Update   Unanswered   Last: Visit   24 Hours   48 Hours

Free Classifieds Amperex Bugle Boy 12AX7 - Byrd69

• Denon 5900 Repair Question - Vic D 21:56:46 05/22/06 (5)
  • I think you should again contact the moder. Exemplar would not leave you high and dry. nt - Norm 06:25:44 05/23/06 (4)
    • Well he didn't. His suggestion was to simply save my time. nt - Vic D 08:05:56 05/23/06 (3)
      • I guess that should be useful in what you buy in the future. nt - Norm 16:23:21 05/24/06 (2)
        • Re: I guess that should be useful in what you buy in the future. nt - Vic D 01:48:19 05/25/06 (1)
          • Sorry, I guess I misunderstood what you had said about ModWright repairing your unit. nt - Norm 20:28:33 05/25/06 (0)
• Ping-Kenster - blackrock john 21:29:17 05/22/06 (2)
  • Re: Ping-Kenster - kenster 23:48:04 05/25/06 (1)
    • Re: Ping-Kenster - blackrock john 09:07:27 05/26/06 (0)
• What's The Best Audio/Video Room Size? - blackrock john 19:45:50 05/22/06 (10)
  • Re: What's The Best Audio/Video Room Size? - blackrock john 06:44:13 05/25/06 (0)
  • Re: What's The Best Audio/Video Room Size? - ChrisVH 12:20:55 05/24/06 (3)
    • Re: What's The Best Audio/Video Room Size? - blackrock john 06:49:19 05/25/06 (2)
      • Re: What's The Best Audio/Video Room Size? - ChrisVH 06:29:20 05/26/06 (1)
        • Re: What's The Best Audio/Video Room Size? - blackrock john 08:53:11 05/26/06 (0)
  • According to George Cardas... - mkuller 11:30:40 05/24/06 (1)
    • Sorry, you have to click on the 'R'...(nt) - mkuller 11:31:45 05/24/06 (0)
  • Re: What's The Best Audio/Video Room Size? - pkell44 08:37:13 05/24/06 (0)
  • Sure depends on what you're putting in it - Ted Smith 22:28:27 05/23/06 (0)
  • Re: What's The Best Audio/Video Room Size? - Ethan Winer 11:29:21 05/23/06 (0)
• potential audio WMD: macho industrial design - troporobo 18:55:33 05/22/06 (0)
• My small ga speaker wire discovery...... - JANDG 18:27:49 05/22/06 (11)
  • It's not really that "small" - Jon Risch 19:42:49 05/24/06 (1)
    • Re: It's not really that "small" - JANDG 19:54:52 05/24/06 (0)
  • Re: My small ga speaker wire discovery...... - pkell44 08:55:27 05/24/06 (0)
  • Re: My small ga speaker wire discovery...... - MylesJ 12:04:14 05/23/06 (5)
    • Re: My small ga speaker wire discovery...... - Rick7 13:22:54 05/24/06 (2)
      • Yes, that is the design of multi-pair cables. - Al Sekela 14:14:40 05/24/06 (1)
        • Re: Yes, But - chris_w 11:48:49 05/25/06 (0)
    • Re: My small ga speaker wire discovery...... - JANDG 16:46:24 05/23/06 (1)
      • Re: My small ga speaker wire discovery...... - MylesJ 10:49:20 05/24/06 (0)
  • Re: My small ga speaker wire discovery...... - zanash 23:19:49 05/22/06 (0)
  • Re: My small ga speaker wire discovery...... - Rick7 22:29:03 05/22/06 (0)
• air tangent tonearm & vibration management - bbenn 18:08:07 05/22/06 (0)
• DIY FM tuner reports - 3moons 17:06:52 05/22/06 (0)
• Need HELP desperately... - Vynuhl.Addict 16:58:07 05/22/06 (1)
  • Interesting conclusion for now.... - Vynuhl.Addict 02:39:49 05/23/06 (0)
• accoustical rating of drywall? - sreno 15:22:25 05/22/06 (3)
  • Ask a Drywall Supplier .Doh! - Bare 18:55:06 05/23/06 (0)
  • click the banner ad to the right! - neal2734 17:31:53 05/23/06 (0)
  • Re: accoustical rating of drywall? - pkell44 18:37:04 05/22/06 (0)
• Diy Audio Club Columbus/Central Ohio.. - tubeaudio1 14:54:31 05/22/06 (1)
  • Re: Diy Audio Club Columbus/Central Ohio.. - critofur 10:35:37 05/30/06 (0)
• Anyone know how to diy taralab the zero interconnect and omega speaker cable ? - GV io 12:07:38 05/22/06 (0)
• New DIY speaker stands (pics) - TopPop 11:41:42 05/22/06 (1)
  • Good on ya, TP! - bartc 19:48:27 05/22/06 (0)
• Driver alignment question - Tom R. 10:26:56 05/22/06 (0)
• ALPS pot question - CWB 09:53:24 05/22/06 (1)
  • Re: ALPS pot question - Vynuhl.Addict 11:47:09 05/22/06 (0)
• Tweak/upgrade recommendations for Cary SLP-98L - gordan 02:50:14 05/22/06 (2)
  • Re: Tweak/upgrade recommendations for Cary SLP-98L - gordan 03:01:49 05/22/06 (1)
    • Re: Tweak/upgrade recommendations for Cary SLP-98L - clio09 07:07:45 05/22/06 (0)
• Blackgate FK's or N in decoupling - Jts 23:30:26 05/21/06 (3)
  • Re: Blackgate FK's or N in decoupling - fmak 06:09:56 05/22/06 (2)
    • Re: Blackgate FK's or N in decoupling - Wally 11:31:20 05/22/06 (1)
      • Re: Blackgate FK's or N in decoupling - jts 06:02:52 05/23/06 (0)
• Oyaide C-046 and C-079 IEC's - Duster 18:52:35 05/21/06 (0)
• Soft Dome Tweeter coatings - Rhydon 17:52:39 05/21/06 (2)
  • take it easy when you don't know the chemistry of the original coating - tonemaniac 20:07:22 05/21/06 (1)
    • Re: take it easy when you don't know the chemistry of the original coating - Rhydon 20:53:00 05/21/06 (0)
• DDDAC kit soldering advice sought - redneckdent 08:19:25 05/21/06 (6)
  • Re: DDDAC kit soldering advice sought - pburke 16:58:30 05/21/06 (2)
    • thanks to all for the advice - redneckdent 20:32:07 05/21/06 (1)
      • Re: thanks to all for the advice - pburke 08:55:00 05/22/06 (0)
  • Re: DDDAC kit soldering advice sought - unclestu52 14:39:14 05/21/06 (0)
  • a 40 watt iron seems way too big - scruffy_ 10:16:05 05/21/06 (1)
    • Second that - Detailman 13:38:37 05/21/06 (0)
• What else do you DIY? - TopPop 08:08:32 05/21/06 (11)
  • I built my listening room - RJeff 17:50:34 05/24/06 (0)
  • My sex life. - OpenBaffle 09:10:17 05/23/06 (0)
  • Re: What else do you DIY? - REL54 20:07:40 05/22/06 (0)
  • Re: What else do you DIY? - MylesJ 14:34:03 05/22/06 (0)
  • Re: What else do you DIY? - Dman 11:26:03 05/22/06 (0)
  • My new computer desk... - RickeyM 23:18:44 05/21/06 (0)
  • zymurgy, enology - troporobo 18:08:05 05/21/06 (0)
  • Bi focals - jnorv 15:57:43 05/21/06 (0)
  • I have been known to roll my own - Julien43 14:54:49 05/21/06 (0)
  • Golf Clubs, Surfboard repair, Computer building, Handyman (I tend to cause more problems)..nt - JoeE 12:38:39 05/21/06 (0)
  • I've done lots of my own automotive work. My Dad was a mechanic... - jeffreybehr 10:31:07 05/21/06 (0)
• Terminal Weirdness: The Tice Power Block decoded, sort of - tonemaniac 00:13:13 05/21/06 (2)
  • Not balanced, just unloaded - pmkap 20:15:47 05/21/06 (1)
    • Interesting theory.. Tested it.. No cigar - tonemaniac 16:04:26 05/22/06 (0)
• AudioXpress Adcom GFP-565 PreAmp Mods - dtm1962 00:05:17 05/21/06 (0)
• Using Vishay MKP 1837s along the Signal Path - scruffy_ 06:27:42 05/20/06 (6)
  • Re: Using Vishay MKP 1837s along the Signal Path - pburke 09:01:11 05/22/06 (5)
    • rs export - scruffy_ 09:33:04 05/22/06 (4)
      • Re: rs export - pburke 11:06:39 05/22/06 (3)
        • Giant multicap - scruffy_ 13:27:58 05/22/06 (2)
          • Re: Giant multicap - pburke 19:33:42 05/22/06 (1)
            • 68 and counting - scruffy_ 05:35:38 05/23/06 (0)
• Resistor recommendation for digital termination - TBM 12:51:59 05/19/06 (1)
  • Dale/Vishay RN55E - Panelhead 17:56:27 05/19/06 (0)
• Different between Rubycon ZA and ZL? - Bom 10:44:35 05/19/06 (6)
  • Re: Different between Rubycon ZA and ZL? - Ping 02:12:54 05/21/06 (0)
  • Re: Different between Rubycon ZA and ZL? - lovekylie 13:41:35 05/19/06 (4)
    • Re: Different between Rubycon ZA and ZL? - Sam H 18:33:51 05/21/06 (0)
    • Re: Different between Rubycon ZA and ZL? - Bom 09:27:52 05/21/06 (1)
      • output transistors?? - Vynuhl.Addict 20:27:40 05/21/06 (0)
    • Re: Different between Rubycon ZA and ZL? - Dave Garretson 14:17:40 05/19/06 (0)
• Oyaide P-029 - Scott 2.6/R 08:44:28 05/19/06 (2)
  • Re: Oyaide P-029 - kenster 22:56:51 05/19/06 (0)
  • I was just reading about their outlets. - Sigmund 17:13:07 05/19/06 (0)
• Is bypass cap good here? - Rein 03:01:44 05/19/06 (7)
  • Re: Thank you all - Rein 13:59:31 05/20/06 (0)
  • Don't know, might be too small... - Al Sekela 15:11:57 05/19/06 (4)
    • Re: Don't know, might be too small... - guest 07:42:28 05/20/06 (3)
      • Not only ESR, but parasitic inductance - Al Sekela 14:43:55 05/20/06 (2)
        • Re: actually... - Rein 05:52:16 05/21/06 (1)
          • Don't want to waste your money... - Al Sekela 11:37:44 05/21/06 (0)
  • Re: Is bypass cap good here? - guest 07:23:03 05/19/06 (0)
• safety question - MylesJ 22:58:48 05/18/06 (2)
  • Should be OK - Al Sekela 15:03:51 05/19/06 (1)
    • Re: Should be OK - MylesJ 15:25:09 05/19/06 (0)
• Ping BDiament, roller blocks under sandbox under sprung TT - Timbo in Oz 22:29:58 05/18/06 (4)
  • Re: Ping BDiament, roller blocks under sandbox under sprung TT - theophile 18:27:26 05/21/06 (0)
  • Re: Ping BDiament... (try his web site) - Herschel 08:55:47 05/21/06 (0)
  • Rightio then, a few more questions. - Timbo in Oz 17:19:45 05/19/06 (0)
  • Re: Ping BDiament, roller blocks under sandbox under sprung TT - Aleksunder 05:49:36 05/19/06 (0)
• HELP desoldering multi-pinned chip: TDA 1543 - redneckdent 16:37:28 05/18/06 (10)
  • Re: HELP desoldering multi-pinned chip: TDA 1543 - pburke 08:59:44 05/22/06 (0)
  • Re: HELP desoldering multi-pinned chip: TDA 1543 - adam912 16:40:59 05/19/06 (1)
    • Thanks.... - unclestu52 16:58:32 05/19/06 (0)
  • Hey, how about 8 solding irons at once??? :) NT - scruffy_ 06:09:30 05/19/06 (0)
  • Sony - unclestu52 19:10:51 05/18/06 (0)
  • If you want to keep it - Tweekeng 18:36:46 05/18/06 (0)
  • Re: HELP desoldering multi-pinned chip: TDA 1543 - Fatcobra 17:42:36 05/18/06 (0)
  • Are you intent upon saving the chip? - Poindexter 17:38:30 05/18/06 (0)
  • I did manage to do it but the chips were scrap afterwards - scruffy_ 17:35:19 05/18/06 (1)
    • Re: I did manage to do it but the chips were scrap afterwards - pkell44 18:12:58 05/18/06 (0)
• What kind of wire ... - JB 10:51:56 05/18/06 (1)
  • Re: What kind of wire ... - zanash 11:47:47 05/18/06 (0)
• DAC I/V resistor recommendation - TBM 09:06:02 05/18/06 (5)
  • Re: DAC I/V resistor recommendation - scruffy_ 15:52:13 05/18/06 (0)
  • Re: DAC I/V resistor recommendation - pkell44 10:14:36 05/18/06 (3)
    • Re: DAC I/V resistor recommendation - JB 10:25:05 05/18/06 (2)
      • Thanks! - TBM 12:21:57 05/19/06 (0)
      • Re: DAC I/V resistor recommendation - zanash 11:50:05 05/18/06 (0)
• I have had cryogenic treatments done before, but not recently. What are good present sources? nt - Norm 06:33:27 05/18/06 (7)
  • Re: I have had cryogenic treatments done before, but not recently. What are good present sources? nt - floydandrews 16:55:54 05/22/06 (0)
  • Jena Labs is a good one - Quint 14:08:50 05/21/06 (0)
  • Re: Cryopro in MO is also quite adept w/ audio items - geoffkait 09:01:09 05/18/06 (2)
    • Cryopro is the company I used to use. nt - Norm 06:44:52 05/27/06 (1)
      • Re: I've used Cryopro for 12 years. My, how time flies. nt - geoffkait 07:52:34 05/27/06 (0)
  • a couple suggestions - Mike B. 08:11:45 05/18/06 (1)
    • Re: a couple suggestions - pkell44 10:17:11 05/18/06 (0)
• Shielding - why all the controversy and where are some FAQS? - bartc 06:02:29 05/18/06 (6)
  • Re: Shielding - why all the controversy and where are some FAQS? - Steve Eddy 17:58:03 05/18/06 (0)
  • Re: Shielding - why all the controversy and where are some FAQS? - guest 11:00:14 05/18/06 (0)
  • Re: Shielding - Fatcobra 08:58:01 05/18/06 (3)
    • Re: Shielding - pkell44 11:23:14 05/18/06 (2)
      • Re: what part of my response did you disagree with?... - Fatcobra 15:36:10 05/18/06 (1)
        • Re: what part of my response did you disagree with?... - pkell44 17:09:18 05/18/06 (0)
• Question for Jon Risch on Tube Traps vs. Realtraps - NAL 21:17:49 05/17/06 (7)
  • Re: Question for Jon Risch on Tube Traps vs. Realtraps - Jon Risch 22:38:34 05/19/06 (4)
    • Re: Question for Jon Risch on Tube Traps vs. Realtraps - NAL 07:32:57 05/20/06 (3)
      • Re: Question for Jon Risch on Tube Traps vs. Realtraps - Ethan Winer 09:54:26 05/20/06 (2)
        • Re: Question for Jon Risch on Tube Traps vs. Realtraps - NAL 12:46:42 05/20/06 (1)
          • Re: Question for Jon Risch on Tube Traps vs. Realtraps - Ethan Winer 12:24:36 05/21/06 (0)
  • Re: Question for Jon Risch on Tube Traps vs. Realtraps - kingdaddy 07:15:55 05/19/06 (1)
    • Re: Question for Jon Risch on Tube Traps vs. Realtraps - Ethan Winer 11:56:06 05/19/06 (0)
• Bursonaudio HDAM or Opamp? - mjerram@gmail.com 20:25:18 05/17/06 (2)
  • Re: Bursonaudio HDAM or Opamp? - escorpio 23:49:31 05/21/06 (0)
  • Re: Bursonaudio HDAM or Opamp? - zanash 23:34:45 05/17/06 (0)
• Oyaide outlets--best source? - Jon L 14:28:48 05/17/06 (5)
  • I've enjoyed dealing with Alan Kafton at Audio Excellence - passion4audio 19:03:54 05/19/06 (0)
  • Re: Oyaide outlets--best source? - Duster 16:03:01 05/17/06 (3)
    • So where does the silver-rhodium fit in the picture? - cdb 18:48:26 05/17/06 (2)
      • Re: So where does the silver-rhodium fit in the picture? - pkell44 11:46:22 05/18/06 (0)
      • Re: So where does the silver-rhodium fit in the picture? - Duster 20:25:08 05/17/06 (0)
• Pass and Seymour outlet after almost 200 hours. Mixed blessing. - Sigmund 12:45:20 05/17/06 (36)
  • clarification in all fairness - Sigmund 08:05:49 05/18/06 (27)
    • Re: stm like you'd prefer the sonic signature of.. - Fatcobra 09:10:11 05/18/06 (18)
      • I'm not so sure.... - blake 12:41:08 05/18/06 (17)
        • Re: I'm not so sure.... - Fatcobra 18:17:21 05/18/06 (6)
          • Re: I'm not so sure.... - blake 19:47:15 05/19/06 (3)
            • Re: I'm not so sure.... - Fatcobra 21:32:09 05/19/06 (2)
              • Outlet useless? - screwloose 00:00:39 05/20/06 (1)
                • Re: Outlet useless? - Fatcobra 04:25:37 05/20/06 (0)
          • Levitons - Sigmund 15:15:06 05/19/06 (1)
            • Re: Leviton 5362 or 5362-IG - Fatcobra 15:29:43 05/19/06 (0)
        • No problems before. - Sigmund 14:48:59 05/18/06 (9)
          • Re: you know what I think.. - Fatcobra 17:56:03 05/18/06 (2)
            • Re: Not a bad idea.... - alan m. kafton 00:27:45 05/19/06 (1)
              • my floor - Sigmund 07:07:16 05/19/06 (0)
          • How long has this outlet been burning in? - Keith Lockwood 15:47:22 05/18/06 (5)
            • Sorry, I see 200 hours. You are just getting started. - Keith Lockwood 15:50:26 05/18/06 (4)
              • That'll be hard to bear. - Sigmund 16:28:30 05/18/06 (3)
                • Take it out and burn it in elsewhere if you can't listen through the process. - Keith Lockwood 17:24:57 05/18/06 (2)
                  • I shall grim and bear it. - Sigmund 17:45:27 05/18/06 (1)
                    • you just might.... - Keith Lockwood 18:40:31 05/18/06 (0)
    • fixing bass boom. Buy a sub woofer! - Keith Lockwood 09:10:04 05/18/06 (0)
    • Reality check - bartc 08:45:04 05/18/06 (6)
      • I'm still wondering about a non-cryoed outlet. - Sigmund 08:58:51 05/18/06 (5)
        • Start with the burn in and the acoustical treatments - bartc 17:55:22 05/18/06 (4)
          • Should I dampen the outlet box? - Sigmund 18:01:57 05/18/06 (3)
            • Re: Should I dampen the outlet box? - bartc 21:00:54 05/18/06 (2)
              • Re: Should I dampen the outlet box? - Sigmund 07:09:16 05/19/06 (1)
                • Not for your boom problem, but for other reasons - bartc 08:02:19 05/19/06 (0)
  • Just bought that outlet also. What wire should I use from breaker panel to outlet? - oldcrow 05:21:11 05/18/06 (1)
    • Re: Just bought that outlet also. What wire should I use from breaker panel to outlet? - RadioWonder 14:03:16 05/19/06 (0)
  • Re: Pass and Seymour outlet after almost 200 hours. Mixed blessing. - MikeInSeattle 14:13:45 05/17/06 (1)
    • Yeah. I wish he would have explained himself. - Sigmund 14:17:03 05/17/06 (0)
  • Re: Pass and Seymour outlet after almost 200 hours. Mixed blessing. - alan m. kafton 13:15:37 05/17/06 (3)
    • Alan has hit on what is the most overlooked....... - Keith Lockwood 06:39:58 05/18/06 (0)
    • Thanks for the feedback and the tip. - Sigmund 14:07:25 05/17/06 (1)
      • Re: Thanks for the feedback and the tip. - alan m. kafton 14:34:54 05/17/06 (0)
• Does size matter for 12 volt line for Tripath (Charlize) amp? - chopper87@aol.com 09:22:39 05/17/06 (2)
  • Re: Does size matter for 12 volt line for Tripath (Charlize) amp? - pkell44 09:30:53 05/17/06 (1)
    • Re: Does size matter for 12 volt line for Tripath (Charlize) amp? - Awe-d-o-file 16:30:10 05/17/06 (0)
• Elna Starget vs. Nichicon Muse KZ. - ramw 08:02:32 05/17/06 (5)
  • I used Nichicon Muse KZ on the Filament .... - KIS 13:39:28 05/21/06 (0)
  • Re: Elna Starget vs. Nichicon Muse KZ. - zanash 23:32:09 05/17/06 (3)
    • Re: Elna Starget vs. Nichicon Muse KZ. - ramw 02:50:19 05/18/06 (2)
      • New Panasonic FM - nightdoggy 07:32:28 05/18/06 (1)
        • Clarification - nightdoggy 12:10:49 05/22/06 (0)
• Black CDR people: we made Stereophile... - Stercom 06:49:25 05/17/06 (13)
  • Got a chance to play with the NESPA last weekend - BadgerDMS 08:05:47 05/19/06 (3)
    • Re: Got a chance to play with the NESPA last weekend - Stercom 08:34:12 05/19/06 (2)
      • How NESPA works? - Jon Risch 21:35:49 05/21/06 (0)
      • They can post, but - BadgerDMS 18:58:57 05/19/06 (0)
  • Re: Black CDR people: we made Stereophile... - JB 10:47:51 05/18/06 (1)
    • Older Black Memorex CDRs - Stercom 12:53:51 05/18/06 (0)
  • Re: Black CDR people: we made Stereophile... - Plug 02:54:24 05/18/06 (3)
    • Re: Black CDR people: we made Stereophile... - Stercom 05:39:05 05/18/06 (2)
      • Nespa... - Plug 08:49:29 05/18/06 (0)
      • Re: I don't advocate this, but I've seen it done - Fatcobra 08:40:56 05/18/06 (0)
  • moved on... - pburke 09:24:51 05/17/06 (1)
    • Re:agree,, hard drive is d shiz... - Fatcobra 08:15:58 05/18/06 (0)
  • Re:I realized the other day.. - Fatcobra 08:35:41 05/17/06 (0)
• Spendor BC-III BC3 Crossover update - Gofast 05:58:38 05/17/06 (13)
  • Re: Spendor BC-III BC3 Crossover update - cyclonic 23:29:37 05/19/06 (1)
    • Re: Spendor BC-III BC3 Crossover update - Gofast 06:50:13 05/22/06 (0)
  • Added FFT graphs of original XO - Gofast 08:55:18 05/17/06 (0)
  • Yikes!... - Bare 08:08:19 05/17/06 (3)
    • Re: Yikes!... - Gofast 08:42:37 05/17/06 (2)
      • Huhhh. - Bare 12:25:35 05/17/06 (1)
        • Tannoy - Gofast 13:02:47 05/17/06 (0)
  • Re: Spendor BC-III BC3 Crossover update - deankhor 07:07:18 05/17/06 (0)
  • Link to photos - Gofast 06:06:44 05/17/06 (4)
    • 3rd try - Gofast 06:14:07 05/17/06 (2)
      • Re: 3rd try - pburke 13:35:14 05/17/06 (1)
        • Re: 3rd try - Gofast 19:04:26 05/17/06 (0)
    • 2nd try - Gofast 06:12:19 05/17/06 (0)
• depth of sand-box for a TD150 - Timbo in Oz 01:15:38 05/17/06 (1)
  • Re: depth of sand-box for a TD150 - zanash 03:37:21 05/17/06 (0)
• Joined: 30 Aug 2005Posts: 40Location: California What hook-up wire to use for digital input jack - yo2tup 22:33:41 05/16/06 (2)
  • Re: Joined: 30 Aug 2005Posts: 40Location: California What hook-up wire to use for digital input jack - zanash 23:13:36 05/16/06 (1)
    • Re: Joined: 30 Aug 2005Posts: 40Location: California What hook-up wire to use for digital input jack - pkell44 09:35:00 05/17/06 (0)
• Durama 3ii Question - greg7 21:18:34 05/16/06 (0)
• Mapleshade Micro-Smooth - Mark Cashman 10:36:28 05/16/06 (0)
• Isn't current draw the same no matter what the application? - Sigmund 08:05:08 05/16/06 (44)
  • Outlet break-in - Mike B. 08:48:15 05/16/06 (43)
    • Re: Outlet break-in - pkell44 09:37:18 05/17/06 (0)
    • more info - Sigmund 08:59:04 05/16/06 (41)
      • Re: more info - blake 11:31:04 05/16/06 (1)
        • Yeah, I think so. - Sigmund 14:33:53 05/16/06 (0)
      • Re: more info - Mike B. 09:33:01 05/16/06 (38)
        • Cryoing, Lowers the noise floor? - MikeInSeattle 12:45:41 05/16/06 (33)
          • Re: Cryoing, Lowers the noise floor? - Mike B. 13:21:41 05/16/06 (32)
            • Re: Cryoing, Lowers the noise floor? - MikeInSeattle 02:32:37 05/17/06 (27)
              • Re: Cryoing, Lowers the noise floor? - Mike B. 08:34:48 05/17/06 (26)
                • Re: Cryoing, Lowers the noise floor? - MikeInSeattle 08:59:34 05/17/06 (25)
                  • MikeInSeattle is his own anti shill - Keith Lockwood 06:51:26 05/19/06 (0)
                  • There you have it....... - Mike B. 10:55:08 05/17/06 (10)
                    • Re: Yep.... - alan m. kafton 11:09:56 05/17/06 (9)
                      • Re: Yep.... - MikeInSeattle 11:12:33 05/17/06 (8)
                        • Re: Yep.... - Michigan Tech? 12:24:13 05/17/06 (1)
                          • Re: Yep.... - MikeInSeattle 14:20:11 05/17/06 (0)
                        • Re: Big deal.... - alan m. kafton 11:20:42 05/17/06 (1)
                          • Waaaaaahhhhhhh!!!! - MikeInSeattle 11:58:16 05/17/06 (0)
                        • I have easier ones if that one is too hard to understand. - MikeInSeattle 11:15:09 05/17/06 (3)
                          • Do you have one with real science in it? - Al Sekela 14:37:09 05/17/06 (2)
                            • Re: Do you have one with real science in it? - MikeInSeattle 14:45:03 05/17/06 (1)
                              • My point is the misuse of a technical paper to bash inmates. - Al Sekela 16:05:48 05/18/06 (0)
                  • Re: Cryoing, Lowers the noise floor? - pkell44 09:52:13 05/17/06 (12)
                    • Re: Cryoing, Lowers the noise floor? - MikeInSeattle 10:00:10 05/17/06 (11)
                      • Re: Cryoing, Lowers the noise floor? - pkell44 11:26:10 05/17/06 (10)
                        • Back to Science 101 for you. - MikeInSeattle 12:04:36 05/17/06 (9)
                          • Re: SCIENCE.... - alan m. kafton 12:49:56 05/17/06 (8)
                            • Can't everything you need to know about science could be Google'd, right? - Michigan Tech? 13:10:00 05/17/06 (0)
                            • Re: SCIENCE but back to the subject. - MikeInSeattle 12:58:32 05/17/06 (6)
                              • Re: "Who gives a shit about the definition of science."....too funny. - alan m. kafton 13:21:54 05/17/06 (5)
                                • Re: "Who gives a shit about the definition of science."....too funny. - guest 10:32:12 05/18/06 (4)
                                  • Ockham's Razor - Al Sekela 14:58:38 05/20/06 (3)
                                    • Re: Ockham's Razor - guest 01:51:01 05/21/06 (2)
                                      • No, it is much simpler than that... - Al Sekela 11:23:17 05/21/06 (1)
                                        • Re: No, it is much simpler than that... - guest 21:55:52 05/21/06 (0)
            • Re: Cryoing, Lowers the noise floor? - alan m. kafton 16:59:50 05/16/06 (3)
              • Re: Cryoing, Lowers the noise floor? - guest 10:41:48 05/18/06 (0)
              • Re: Cryoing, Lowers the noise floor? - MikeInSeattle 02:34:00 05/17/06 (0)
              • Thirded..... - blake 20:38:43 05/16/06 (0)
        • Thanks for your comments. - Sigmund 09:43:30 05/16/06 (3)
          • Re: Thanks for your comments. - Mike B. 11:32:24 05/16/06 (2)
            • I'm currently playing with speaker placement. - Sigmund 11:55:03 05/16/06 (1)
              • Re: I'm currently playing with speaker placement.....ditch the wife! - Fatbosco 17:36:03 05/17/06 (0)
• and now for something completely different - BS64 05:48:48 05/16/06 (3)
  • Re: ya sure, least it costs only 3 cents.. - Fatcobra 21:43:08 05/19/06 (0)
  • Re: and now for something completely different - pkell44 19:02:57 05/16/06 (0)
  • Re: and now for something completely different - Door Nail 07:55:24 05/16/06 (0)
• PING: Robert - need info on shielding Magnan cap filter - bartc 22:17:10 05/15/06 (3)
  • Oops! How I did it... - Robert 07:40:14 05/16/06 (1)
    • On the money - bartc 20:05:45 05/16/06 (0)
  • I am assuming you mean me... - Robert 07:34:11 05/16/06 (0)
• John Risch's wall panels, link to a picture ?????? - Norman Bates 17:56:54 05/15/06 (4)
  • Re: Jon Risch's wall panels, link to a picture ?????? - Jon Risch 20:03:21 05/16/06 (2)
    • ahhhhh. Any diffusion recepies ? - Norman Bates 13:54:28 05/17/06 (1)
      • Re: ahhhhh. Any diffusion recepies ? - David Aiken 19:51:15 05/22/06 (0)
  • Inmate, Batman's website {link} - Julien43 13:50:12 05/16/06 (0)
• Adding a second ribbon - series or parallel - Robert Bob 14:03:54 05/15/06 (0)
• Anyone made a Ginko cloud clone? - Frank25 08:12:35 05/15/06 (6)
  • Well sorta - bartc 15:40:55 05/15/06 (4)
    • sands of time... - dave c 20:22:43 05/15/06 (3)
      • Funny you should ask - bartc 06:30:13 05/16/06 (2)
        • I understand your pain! - dave c 11:48:32 05/16/06 (1)
          • Zen of owning cats and sandboxes - bartc 06:04:51 05/17/06 (0)
  • 1 1/2" Norsorex "dead balls" in $1.29 rubber lavatory drain gaskets - Dave Pogue 09:42:28 05/15/06 (0)
• Acrylic: cast or extruded? - greg7 07:08:06 05/15/06 (2)
  • Re: Acrylic: cast or extruded? - vinyl-addict 11:25:08 05/17/06 (0)
  • Re: Acrylic: cast or extruded? - badman 08:10:15 05/15/06 (0)
• please help....Blackgate / Rubycon zl, za, / Nichicon KZ in power supply - Bom 04:55:13 05/15/06 (6)
  • Re: please help....Blackgate / Rubycon zl, za, / Nichicon KZ in power supply - twc5964@charter.net 08:16:44 05/19/06 (0)
  • Re: please help....Blackgate / Rubycon zl, za, / Nichicon KZ in power supply - tszeking.cheng@homecall.co.uk 17:17:14 05/15/06 (2)
    • Re: please help....Blackgate / Rubycon zl, za, / Nichicon KZ in power supply - Bom 07:23:50 05/16/06 (1)
      • Re: please help....Blackgate / Rubycon zl, za, / Nichicon KZ in power supply - tszeking.cheng@homecall.co.uk 19:11:36 05/19/06 (0)
  • Re: please help....Blackgate / Rubycon zl, za, / Nichicon KZ in power supply - fmak 06:23:21 05/15/06 (0)
  • Re: please help....Blackgate / Rubycon zl, za, / Nichicon KZ in power supply - Dave Garretson 05:17:10 05/15/06 (0)
• ALPS versus NOBLE pots .... which - Gary Jacobson 03:32:50 05/15/06 (2)
  • Re: ALPS versus NOBLE pots .... which - docktorbombay 00:34:54 05/16/06 (1)
    • Ta! I know it's a boring and... - Gary Jacobson 15:37:47 05/16/06 (0)
• audience PC - cdb 14:29:10 05/14/06 (1)
  • Re: audience PC - McAttack 09:35:39 05/17/06 (0)
• 60 Kilojoule capacitor, any takers ? - tonemaniac 11:40:46 05/14/06 (5)
  • Re: dude, is that the flux-capacitor?...nt - Fatcobra 16:46:38 05/16/06 (1)
    • Re: that's what makes time travel possible. - Michael J Foxx 16:51:14 05/16/06 (0)
  • Re: 60 Kilojoule capacitor, any takers ? - pburke 10:02:10 05/15/06 (1)
    • Re: 60 Kilojoule capacitor, any takers ? - pkell44 19:08:32 05/16/06 (0)
  • Cost ? - djk 17:03:02 05/14/06 (0)
• Looking for good sounding 16 to 25V cap 22000uF thereabout ... - KIS 10:54:08 05/14/06 (0)
• Are Rel-Cap RT capacitors marked as to which end is the shield? - reb 10:48:39 05/14/06 (1)
  • Re: Are Rel-Cap RT capacitors marked as to which end is the shield? - pkell44 11:16:14 05/14/06 (0)
• DIY subwoofer enclosure plans - traut 10:25:02 05/13/06 (2)
  • If you'd like help with enclosure construction... - B. King 12:11:12 05/13/06 (0)
  • Re: DIY subwoofer enclosure plans - Dman 10:57:32 05/13/06 (0)
• Room treatment ideas - jcoe 06:05:40 05/13/06 (4)
  • Here's what I did - Ted Smith 14:12:50 05/13/06 (1)
    • P.S. I forgot to say - Ted Smith 14:19:44 05/13/06 (0)
  • Re: Room treatment ideas - Ethan Winer 09:35:51 05/13/06 (1)
    • Re: Room treatment ideas - jcoe 07:12:35 05/14/06 (0)
• Cleaning silver RCA´s with Deoxit? - Mandarinus 01:18:38 05/13/06 (11)
  • 6 Months - djk 18:50:38 05/13/06 (6)
    • Re: 6 Months - zanash 07:20:12 05/14/06 (5)
      • Chemistry? - djk 17:01:02 05/14/06 (3)
        • Re: Chemistry? - zanash 01:24:16 05/15/06 (2)
          • But... - djk 18:40:37 05/15/06 (1)
            • Re: But... - zanash 07:19:00 05/16/06 (0)
      • Re: 6 Months - pkell44 11:25:34 05/14/06 (0)
  • Re: Cleaning with Deoxit? - Bare 08:28:37 05/13/06 (3)
    • Re: Cleaning with Deoxit? - zanash 07:23:42 05/14/06 (2)
      • Re: Cleaning with Deoxit? - pkell44 11:27:58 05/14/06 (1)
        • Re: Cleaning with Deoxit? - zanash 01:26:51 05/15/06 (0)
• Tweaking the Cambridge Model Six loudspeakers - bunni 16:17:42 05/12/06 (1)
  • Re: Tweaking the Cambridge Model Six loudspeakers - Duster 09:56:39 05/15/06 (0)
• DIY - Testing Speaker efficiency ? - JoeE 10:49:44 05/12/06 (3)
  • Re: DIY - Testing Speaker efficiency ? - Mike B. 13:06:21 05/12/06 (0)
  • Re: DIY - Testing Speaker efficiency ? - jamesV3 11:59:12 05/12/06 (1)
    • Re: DIY - Testing Speaker efficiency ? - jamesV3 17:10:54 05/12/06 (0)
• DIY turnntable base - Frank25 09:54:43 05/12/06 (9)
  • Re: DIY turnntable base - MylesJ 14:50:10 05/17/06 (0)
  • Float it on air++++Use a small inner-tube. - Rob C 17:59:44 05/12/06 (7)
    • Re: Float it on air++++Use a small inner-tube.(NT) - Rob C 11:06:28 05/13/06 (6)
      • Re: a little less than stable,, no?.. - Fatcobra 16:08:49 05/15/06 (0)
      • Re: Float it on air++++Use a small inner-tube.(NT) - Frank25 08:20:54 05/14/06 (4)
        • Yes, no or maybe… - David Aiken 19:07:34 05/14/06 (3)
          • Re: Yes, no or maybe… - Frank25 08:17:27 05/15/06 (2)
            • Wall mount - Rob C 08:31:43 05/15/06 (1)
              • Re: Wall mount + 'rollers'? - Aleksunder 07:36:02 05/16/06 (0)
• Yamaha NS-1000M Rewire!!! - oasiset05@dodo.com.au 06:47:23 05/12/06 (2)
  • Re: Yamaha NS-1000M Rewire!!! - rockcityaor 13:40:44 05/16/06 (0)
  • Re: Yamaha NS-1000M Rewire!!! - zanash 12:58:08 05/12/06 (0)
• Acoustic Revive RR-77.. Wierd, but it works - eduardoo 00:52:26 05/12/06 (4)
  • Re: Acoustic Revive RR-77.. Wierd, but it works - mjv 10:50:31 05/13/06 (2)
    • Yes, I wish we had the Yen... - David W. Robinson 15:37:15 05/14/06 (0)
    • Re: Acoustic Revive RR-77.. Wierd, but it works - eduardoo 21:56:57 05/13/06 (0)
  • I "don't mind being an audio wierdo." As for the "Schumann resonance" stuff... - clarkjohnsen 09:55:33 05/13/06 (0)
• Cardas capacitors voltage - Finnegan 00:06:29 05/12/06 (1)
  • Perhaps - badman 05:35:00 05/13/06 (0)
• I searched the archives, but I can't find any info on short, wide DIY speaker stands. - TopPop 22:48:36 05/11/06 (6)
  • Here's the link - bartc 12:22:30 05/12/06 (2)
    • Link inside link is dead... - TopPop 19:50:44 05/12/06 (1)
      • Hmmm, cannot seem to overcome dead links. - bartc 06:12:31 05/13/06 (0)
  • Check the archives - bartc 05:23:52 05/12/06 (0)
  • Talk to Noel at Skylan Stands - moray james 23:13:55 05/11/06 (1)
    • Thanks, Moray, for the recommendation! -nt- - TopPop 21:48:02 05/12/06 (0)
• nad 710 headamp question - twc5964@charter.net 19:39:01 05/11/06 (0)
• P&S cryovaced outlet, after eight hours. - Sigmund 17:32:47 05/11/06 (0)
• Toshiba 3950 and Jensen 4 pole - IXOYE 09:24:42 05/11/06 (5)
  • k t turnstall-" Eye to the Telescope" - bluenose 10:32:32 05/12/06 (2)
    • Re: k t turnstall-" Eye to the Telescope" - IXOYE 12:37:55 05/12/06 (1)
      • Re: got it to work - IXOYE 02:18:53 05/16/06 (0)
  • Re: Toshiba 3950 and Jensen 4 pole - pburke 09:28:48 05/12/06 (0)
  • Re: Toshiba 3950 and Jensen 4 pole - Batman 19:30:38 05/11/06 (0)
• Unhappy balls - dcktr 20:19:44 05/10/06 (7)
  • a sharp knife - pburke 09:32:27 05/12/06 (0)
  • Re: Unhappy balls - DaveT 06:46:15 05/11/06 (0)
  • Garden hose washers are close to a perfect fit. - markrohr 06:11:29 05/11/06 (0)
  • I found the perfect solution - Dave Pogue 05:45:55 05/11/06 (0)
  • I use 'o' rings - Julien43 05:00:19 05/11/06 (0)
  • After the truss jokes, here are 2 serious ways - bartc 21:25:05 05/10/06 (0)
  • Sorry to hear that.... - welly 20:26:58 05/10/06 (0)
• custom equipment rack design? - Audistic 18:54:54 05/10/06 (1)
  • and it stoned me... - dave c 14:15:19 05/11/06 (0)
• Passive volume pot - is this correct? - LowRedMoon 15:23:53 05/10/06 (3)
  • Thanks, guys. Thanks for the excellent link, Steve! (nt) - LowRedMoon 16:26:42 05/10/06 (0)
  • Re: Passive volume pot - is this correct? - Steve Eddy 16:19:09 05/10/06 (0)
  • looks ok to me - Tweekeng 16:18:50 05/10/06 (0)
• Has anyone tried replacing Toslink with Fibre link ? - chris_w 13:23:31 05/10/06 (0)
• Does Ti don't have product sample anymore? - Bom 08:50:29 05/10/06 (4)
  • Most distrubitors still do... - Tweekeng 13:47:14 05/10/06 (2)
    • Re: Most distributors still do... - Rob C 10:15:53 05/11/06 (1)
      • Re: Most distributors still do... - Rob C 10:34:12 05/11/06 (0)
  • Old News - Jon L 09:00:11 05/10/06 (0)
• Mapleshade Micro-Smooth - Mark Cashman 07:15:26 05/10/06 (6)
  • Re: Mapleshade Micro-Smooth - geoffkait 11:50:20 05/10/06 (3)
    • Rub hard - oofer 14:47:42 05/10/06 (2)
      • Re: Rub hard - Tuckers 22:43:29 05/11/06 (0)
      • Re: I would suggest... - geoffkait 15:51:56 05/10/06 (0)
  • Re: Mapleshade Micro-Smooth - Dave Pogue 11:25:42 05/10/06 (0)
  • Re: Mapleshade Micro-Smooth - pkell44 11:14:38 05/10/06 (0)
• Need some thoughts from experience on PSU material - bartc 08:33:19 05/09/06 (18)
  • Re: Need some thoughts from experience on PSU material - zanash 09:38:43 05/09/06 (17)
    • shielding - bartc 18:16:57 05/09/06 (16)
      • dumb question - JB 07:48:44 05/16/06 (1)
        • THHN is - bartc 20:08:56 05/16/06 (0)
      • Re: shielding - zanash 23:09:38 05/09/06 (5)
        • Actually - bartc 06:28:04 05/10/06 (4)
          • Re: Actually - pkell44 18:31:05 05/10/06 (3)
            • OK so - bartc 21:29:10 05/10/06 (2)
              • Re: OK so - pkell44 13:13:36 05/11/06 (1)
                • OK, thanks for the tips! nt - bartc 17:31:38 05/11/06 (0)
      • Re: shielding - pkell44 18:53:40 05/09/06 (7)
        • Re: shielding - bartc 21:30:23 05/09/06 (6)
          • Re: shielding - pkell44 11:18:08 05/10/06 (4)
            • Re: shielding - guest 11:36:39 05/17/06 (3)
              • Re: shielding - pkell44 11:44:54 05/17/06 (2)
                • Re: shielding - guest 16:34:14 05/17/06 (1)
                  • Re: shielding - guest 16:37:59 05/17/06 (0)
          • Re: shielding - zanash 23:10:52 05/09/06 (0)
• First carbon fiber experiments - DIY - bartc 06:31:00 05/09/06 (18)
  • Carbon fiber applications - Al Sekela 15:58:51 05/13/06 (2)
    • Re: Carbon fiber applications - MikeInSeattle 05:59:52 05/14/06 (1)
      • Sorry, no. (nt) - Al Sekela 13:59:09 05/14/06 (0)
  • Re: First carbon fiber experiments - DIY - Rob C 09:12:37 05/10/06 (1)
    • Re: First carbon fiber experiments - DIY - MikeInSeattle 09:48:26 05/10/06 (0)
  • I've used ERS a lot - scruffy_ 05:46:32 05/10/06 (0)
  • Re: First carbon fiber experiments - DIY - MMasztal 17:23:51 05/09/06 (2)
    • Carbon Fiber Source - dhrab 02:55:01 05/10/06 (0)
    • Ebay.com nt - bartc 18:13:52 05/09/06 (0)
  • Yup, try ERS or a Ti-Shield. - Rob Thomas 15:17:15 05/09/06 (0)
  • Use ERS - unclestu52 11:51:33 05/09/06 (7)
    • Re: Use ERS - audionutge@yahoo.com 14:57:02 05/09/06 (6)
      • CF as floating shield - bartc 18:13:16 05/09/06 (5)
        • Re: CF as floating shield - Duster 14:56:06 05/10/06 (4)
          • Re: CF as floating shield - bartc 17:57:03 05/10/06 (3)
            • Re: CF as floating shield - Duster 18:28:47 05/10/06 (2)
              • No offense taken at all - bartc 21:31:08 05/10/06 (1)
                • :-) nt - Duster 23:09:20 05/10/06 (0)
• DACTing an Audio Research LS3 - BrightMellow 02:12:59 05/09/06 (1)
  • Don't recall the value, but that could be a KILLER line stage! - David S. 11:00:51 05/09/06 (0)
• Dynaco is Back www.dynakitparts.com - Fatcobra 21:06:24 05/08/06 (0)
• PS Audio Noise Harvester Anyone tried these? - oofer 17:17:26 05/08/06 (7)
  • As far as I know, they haven't shipped yet - Quint 07:17:52 05/13/06 (1)
    • Re: As far as I know, they haven't shipped yet - Rodrigo 20:57:47 05/16/06 (0)
  • Re: PS Audio Noise Harvester Anyone tried these? - QuadTodd 13:10:37 05/10/06 (0)
  • Looks like a Quiet Line. - Sigmund 08:46:01 05/10/06 (2)
    • It Might Look like a Quiet Line, but... - Deaf Ear 21:49:37 05/11/06 (1)
      • Interesting video. - soulfood 19:54:34 05/14/06 (0)
  • Re: PS Audio Noise Harvester Anyone tried these? - Rob Thomas 15:25:26 05/09/06 (0)
• Sonic signature of inductors - Bom 09:28:04 05/08/06 (6)
  • Re: Sonic signature of inductors - Dave Garretson 08:01:41 05/10/06 (0)
  • Re: Sonic signature of inductors - Bare 13:02:28 05/08/06 (1)
    • Re: Sonic signature of inductors - pkell44 19:54:39 05/09/06 (0)
  • A perfect lay every time - badman 11:25:24 05/08/06 (0)
  • And don't forget the Solen PerfectLays, a knowledgable friend's fave. (NT) - jeffreybehr 10:02:48 05/08/06 (1)
    • A Perfect Lay should be anyone's fave. ;-) nt - MMasztal 10:42:38 05/08/06 (0)
• Inductor placement - Gofast 09:09:23 05/08/06 (2)
  • Re: Inductor placement - pkell44 20:01:50 05/09/06 (1)
    • Re: Inductor placement - Gofast 04:00:54 05/10/06 (0)
• Cap Replacement job gone wrong... - FrogFarm 07:03:02 05/08/06 (10)
  • Re: Cap Replacement job gone wrong... - djk 09:33:17 05/08/06 (6)
    • Right on the money! - FrogFarm 16:20:10 05/08/06 (5)
      • Re: Right on the money! - pkell44 20:15:16 05/09/06 (3)
        • Re: Right on the money! - djk 23:37:51 05/09/06 (2)
          • Re: Right on the money! - pkell44 18:06:59 05/10/06 (1)
            • "not prohibitively expensive" - djk 23:35:30 05/10/06 (0)
      • Schpritz some Rat Shack tuner-cleaner in that offending switch! (nt) - Rob Thomas 15:31:43 05/09/06 (0)
  • Common to both channels is a clue - nightdoggy 08:43:35 05/08/06 (2)
    • Re: Common to both channels is a clue - FrogFarm 16:21:43 05/08/06 (1)
      • I know how worthwhile what you did was - nightdoggy 08:55:09 05/09/06 (0)
• Adding a digital coax out to the Quad 99cdp - zanash 23:07:27 05/07/06 (1)
  • Re: Adding a digital coax out to the Quad 99cdp - pkell44 20:29:43 05/09/06 (0)
• Possible to fix "pop" w/relay muting circuit? - glennw 22:27:55 05/07/06 (8)
  • Re: Possible to fix "pop" w/relay muting circuit? - David Gill 10:32:23 05/08/06 (4)
    • Re: Possible to fix "pop" w/relay muting circuit? - glennw 12:55:06 05/08/06 (3)
      • Re: Possible to fix "pop" w/relay muting circuit? - David Gill 07:13:00 05/09/06 (2)
        • Yep, the mute circuit is needed. - glennw 21:07:57 05/11/06 (1)
          • Re: Yep, the mute circuit is needed. - David Gill 13:20:25 05/12/06 (0)
  • Re: Possible to fix "pop" w/relay muting circuit? - zanash 23:11:20 05/07/06 (2)
    • Diodes eh? Interesting. - glennw 08:24:11 05/08/06 (1)
      • The diode was the ticket. - glennw 06:44:30 05/29/06 (0)
• Anyone know how to diy NBS omega and STEALTH audio dream interconnect and speaker cables? - io audio 16:22:22 05/07/06 (2)
  • Re: Anyone know how to diy NBS omega and STEALTH audio dream interconnect and speaker cables? - zanash 23:20:16 05/07/06 (1)
    • Re: Anyone know how to diy NBS omega and STEALTH audio dream interconnect and speaker cables? - bf skinner 03:28:17 05/14/06 (0)
• Gel Insole Isolation - Paul_A 13:53:38 05/07/06 (4)
  • gel-filled keyboard wrist pads are - snkby 21:00:36 05/08/06 (3)
    • Then why open them? - bartc 05:55:49 05/09/06 (2)
      • i cut it into pieces for isolating more - snkby 22:54:11 05/10/06 (1)
        • Sounds not there under mine; just what I want! - bartc 06:44:11 05/11/06 (0)
• Kef Kube 200 - bboyling@yahoo.ca 12:34:24 05/07/06 (0)
• advantages of DIY speakers over brand name like B&W for same buck??? - steepha 05:11:52 05/07/06 (5)
  • My Experience - nightdoggy 09:05:45 05/08/06 (2)
    • ORCA Zalytron - Rob Thomas 16:12:09 05/09/06 (1)
      • WOW! - nightdoggy 17:28:08 05/09/06 (0)
  • Re: advantages of DIY speakers over brand name like B&W for same buck??? - M.Stojek 09:40:50 05/07/06 (1)
    • Re: advantages of DIY speakers over brand name like B&W for same buck??? - pkell44 10:15:33 05/07/06 (0)
• Soundproofing store wall - sreno 19:44:24 05/05/06 (8)
  • Re: Soundproofing store wall - Rob C 10:48:53 05/11/06 (0)
  • http://www.acoustiblok.com - BS64 11:05:50 05/07/06 (1)
    • Weight - djk 10:05:08 05/08/06 (0)
  • Re: Soundproofing store wall - Paul_A 20:13:22 05/06/06 (0)
  • My guess... - Mike B. 09:56:55 05/06/06 (0)
  • Re: Soundproofing store wall - solda 05:18:44 05/06/06 (0)
  • Acoustilead - djk 01:33:27 05/06/06 (1)
    • Re: Acoustilead - zanash 04:00:13 05/06/06 (0)
• McCormack amp & MF X10-D? - lesS 17:50:25 05/05/06 (8)
  • theory and practice - bartc 21:07:45 05/05/06 (0)
  • Re: McCormack amp & MF X10-D? - Duster 18:39:14 05/05/06 (6)
    • Re: McCormack amp & MF X10-D? - lesS 18:43:04 05/05/06 (5)
      • Re: McCormack amp & MF X10-D? - Duster 19:01:08 05/05/06 (4)
        • Re: McCormack amp & MF X10-D? - lesS 19:10:09 05/05/06 (3)
          • Re: McCormack amp & MF X10-D? - Duster 19:22:09 05/05/06 (2)
            • Re: McCormack amp & MF X10-D? - lesS 19:31:21 05/05/06 (1)
              • :-) nt - Duster 19:33:59 05/05/06 (0)
• PSU Mod for Entech 205.2 DAC - wty 17:04:31 05/05/06 (0)
• BC 606 Power Bar - Patster 09:31:40 05/05/06 (1)
  • Re: BC 606 Power Bar - Patster 11:35:55 05/07/06 (0)
• Upgraded outlets, trick or tweak? - Sigmund 07:38:51 05/05/06 (23)
  • Many thanks one and all. I've made a choice - Sigmund 21:45:14 05/05/06 (4)
    • PLease tell us How much better the upgrade Sounds. - Bare 09:09:11 05/06/06 (3)
      • Will do. I figure it'll be a good week or so. - Sigmund 09:12:05 05/06/06 (2)
        • I wonder how much break in time it'll need? - Paul_A 10:13:09 05/06/06 (1)
          • Excellent suggestion.... - blake 13:12:47 05/06/06 (0)
  • Yes, upgrading outlets definitely works but - bartc 13:35:42 05/05/06 (11)
    • I disagree. - Duster 14:21:12 05/05/06 (10)
      • C'mon.. - Bare 09:17:34 05/06/06 (3)
        • Re: C'mon.. - Owen 01:49:32 05/08/06 (2)
          • Makes even more on interconnects(nt) - Russ57 07:07:23 05/08/06 (1)
            • Absolutely! - Owen 10:08:52 05/08/06 (0)
      • Duster has more experience - bartc 21:21:28 05/05/06 (5)
        • Re: Duster has more experience - Owen 03:44:28 05/08/06 (4)
          • Not sure I'd agree with that - bartc 21:18:41 05/10/06 (1)
            • thanks (nt) - Duster 23:22:06 05/10/06 (0)
          • Not a dispute - bartc 06:20:46 05/08/06 (1)
            • Re: Not a dispute - Owen 09:39:00 05/08/06 (0)
  • Re: Upgraded outlets, trick or tweak? - Mike B. 12:51:40 05/05/06 (0)
  • Re: Upgraded outlets, trick or tweak? - Duster 08:59:12 05/05/06 (4)
    • Does the Oyaide have any nickel in it? - Sigmund 09:15:19 05/05/06 (3)
      • Re: Does the Oyaide have any nickel in it? - dusted 14:34:33 05/05/06 (0)
      • Re: Does the Oyaide have any nickel in it? - pkell44 10:01:28 05/05/06 (0)
      • No, Oyaide does not use nickel. (nt) - Duster 09:34:24 05/05/06 (0)
• Help please with noise problem - Rafal 06:41:39 05/05/06 (4)
  • Re: Help please with noise problem - pkell44 10:13:58 05/05/06 (3)
    • Jumping in with both feet. - clifff 12:17:39 05/05/06 (2)
      • ....?????.... ... .. .. . - EvilSeav 21:55:16 05/05/06 (0)
      • Re: Jumping in with both feet. - pkell44 17:10:08 05/05/06 (0)
• great info site - juddl 15:32:12 05/04/06 (0)
• Not too expensive FFT - Gofast 12:22:21 05/04/06 (3)
  • how about this? - Tweekeng 12:48:08 05/04/06 (2)
    • Re: how about this? - Gofast 13:26:31 05/04/06 (1)
      • Re: how about this? - Kal Rubinson 13:39:16 05/04/06 (0)
• Herbie's Grungebuster warping? - neegran1216 09:39:22 05/04/06 (8)
  • Re: Herbie's Grungebuster warping? - Herbie 14:20:51 05/04/06 (3)
    • Re: Herbie's Grungebuster warping? - dusted 08:54:42 05/05/06 (0)
    • I think that SACD players get a lot hotter than CD players - Metralla 14:47:43 05/04/06 (1)
      • Re: I think that SACD players get a lot hotter than CD players - Herbie 16:57:02 05/04/06 (0)
  • Did you mean Grungebuster2? - hatfield 12:15:58 05/04/06 (3)
    • I've got some that no longer work - snert 12:18:26 05/04/06 (2)
      • Re: I've got some that no longer work - hatfield 12:23:30 05/04/06 (1)
        • Found this at herbie's - snert 13:05:07 05/04/06 (0)
• Speaker Cab Rear panel vibrating - Mark W. 07:52:40 05/04/06 (4)
  • Re: Speaker Cab Rear panel vibrating - REL54 15:06:21 05/04/06 (0)
  • Re: Speaker Cab Rear panel vibrating - Mike B. 10:43:50 05/04/06 (0)
  • Re: Speaker Cab Rear panel vibrating - Duster 10:00:29 05/04/06 (1)
    • Re: Speaker Cab Rear panel vibrating - Mark W. 12:00:53 05/04/06 (0)
• Pot for a passive preamp - mudihan 09:19:25 05/03/06 (12)
  • Smoking illegal substances is not the answer...(nt) - mkuller 11:55:30 05/04/06 (2)
    • Listening to my old office system my (ex)sister-in-law said: "You don't have to be on drugs to enjoy this!" :) [nt] - Ted Smith 15:11:20 05/04/06 (0)
    • Correct, But it can be inspirational !! -t - Julien43 14:33:32 05/04/06 (0)
  • You don't need a pot - Batman 03:43:11 05/04/06 (0)
  • If the preamp is already passive, why does it need pot? nt - clarkjohnsen 12:18:54 05/03/06 (7)
    • Wow, that took me FAR too long! -nt- - TopPop 21:29:59 05/03/06 (0)
    • Re: If the preamp is already passive, why does it need pot? nt - mudihan 14:22:06 05/03/06 (5)
      • To be Kozmically passive, man. - Poindexter 18:01:53 05/03/06 (0)
      • You're confused. Note the difference between... - clarkjohnsen 14:30:25 05/03/06 (3)
        • Re: You're confused. Note the difference between... - mudihan 17:31:17 05/03/06 (2)
          • This is AA. No good straight line goes unanswered. ;-) nt - markrohr 04:24:34 05/04/06 (1)
            • Exactement! nt - clarkjohnsen 08:02:53 05/04/06 (0)
• Results from Dynamat in speaker cabinets. (pics) - TopPop 08:49:10 05/03/06 (5)
  • Don't know about "easily reversible..." - glennw 22:34:55 05/07/06 (1)
    • Re: Don't know about "easily reversible..." - bartc 06:24:16 05/08/06 (0)
  • Glad it worked out well for you. - Al Sekela 19:57:54 05/03/06 (1)
    • Actually, you were right, Al... - TopPop 20:11:38 05/03/06 (0)
  • Re: Results from Dynamat in speaker cabinets. (pics) - MMasztal 09:17:07 05/03/06 (0)
• How well do you think these would work? - TopPop 06:54:14 05/03/06 (7)
  • Re: How well do you think these would work? - clio09 16:08:00 05/03/06 (5)
    • Hmmm.... - TopPop 18:15:47 05/03/06 (4)
      • Re: Hmmm.... - clio09 18:28:33 05/03/06 (3)
        • I'd be interested; keep me updated! -nt- - TopPop 18:39:14 05/03/06 (2)
          • Re: I'd be interested; keep me updated! -nt- - clio09 17:36:59 05/09/06 (0)
          • Re: I'd be interested; keep me updated! -nt- - clio09 19:27:43 05/03/06 (0)
  • Or would these be any better? - TopPop 07:28:20 05/03/06 (0)
• connectors for an external crossover project - Gofast 09:41:56 05/02/06 (4)
  • Re: connectors for an external crossover project - Duster 10:51:31 05/02/06 (3)
    • Re: connectors for an external crossover project - Gofast 11:06:37 05/02/06 (2)
      • Re: connectors for an external crossover project - pburke 13:17:18 05/02/06 (1)
        • Re: connectors for an external crossover project - Gofast 15:00:45 05/02/06 (0)
• Bybee Golden Goddess speaker filters: first impressions - Quint 09:26:10 05/02/06 (2)
  • I have a suspicion (for the DIYers here) - bartc 06:31:49 05/03/06 (1)
    • The Bybees are not - unclestu52 11:30:21 05/03/06 (0)
• Graphitestore now selling alumina disks - tonemaniac 08:05:58 05/02/06 (10)
  • Re: DH Cones & hardness - geoffkait 03:55:13 05/03/06 (0)
  • I use DH Cones sitting point down on top of... - Fiddler 02:48:47 05/03/06 (1)
    • Herbie's Gabon Ebony Domes, too... - Duster 08:45:45 05/03/06 (0)
  • Also... - Steve Eddy 13:04:06 05/02/06 (0)
  • TOTALLY cool! Thanks! (nt) - Djhymn 10:43:42 05/02/06 (0)
  • Shill ?? - Bare 08:43:14 05/02/06 (4)
    • ???? - Owen 15:26:01 05/03/06 (0)
    • Re: Shill ?...I think NOT - bbenn 09:51:40 05/02/06 (2)
      • Agree wholeheartedly. An asset to the asylum. -nt- - TopPop 10:12:59 05/02/06 (1)
        • DittO!!! ...N/T - musetap 11:19:20 05/02/06 (0)
• Audio Research PH3 Capacitors - KK 23:04:40 05/01/06 (0)
• Dynamat lining speaker cabinet walls? And other tweak itches... - TopPop 21:39:00 05/01/06 (8)
  • something else (Herbie's footers)... - Duster 15:13:32 05/03/06 (2)
    • You've done it again, Duster... - TopPop 18:37:56 05/03/06 (1)
      • Cool... - Duster 19:31:44 05/03/06 (0)
  • Probably won't work. - Al Sekela 15:28:46 05/02/06 (0)
  • You can get 'Dynamat' even cheaper... - Bare 08:46:18 05/02/06 (1)
    • Re: You can get 'Dynamat' even cheaper... - Pooge 10:29:31 05/02/06 (0)
  • Re: Dynamat lining speaker cabinet walls? And other tweak itches... - Mike B. 08:01:48 05/02/06 (0)
  • yes, absolutely - troporobo 22:22:43 05/01/06 (0)
• Is it tough to find a Toslink reciever module? - clbeanz 10:10:26 05/01/06 (3)
  • Thanks for the lead and data sheet. I'll pursue these. -t - clbeanz 14:54:54 05/03/06 (0)
  • Re: Is it tough to find a Toslink reciever module? - Tweekeng 07:25:30 05/02/06 (1)
    • Re: Is it tough to find a Toslink reciever module? - pburke 08:14:51 05/02/06 (0)
• Receiver Upgrades/Solid state - elduque 02:00:35 05/01/06 (2)
  • Re: Receiver Upgrades/Solid state - pkell44 10:30:25 05/05/06 (0)
  • Re: Receiver Upgrades/Solid state - Ron Oehlert 18:44:17 05/02/06 (0)
• Op-amps - implementation? 5532? (Jon? Anyone?) - Ecaroh 17:54:33 04/30/06 (7)
  • Re: Op-amps - implementation? 5532? (Jon? Anyone?) - Jon Risch 21:59:31 05/02/06 (1)
    • Thanks, Jon, great information (nt) - Ecaroh 10:40:53 05/05/06 (0)
  • Thanks for the help - Ecaroh 20:24:35 05/02/06 (0)
  • Re: Op-amps - implementation? 5532? (Jon? Anyone?) - lovekylie 11:24:36 05/01/06 (1)
    • Re: Op-amps - implementation? 5532? (Jon? Anyone?) - Semper Fidelity 14:08:13 05/01/06 (0)
  • The 5532 is a good chip... - reuben 04:23:13 05/01/06 (1)
    • Re: The 5532 is a good chip... - Wally 05:28:30 05/01/06 (0)
• 7591 tube question....................Help - G zed 34 17:18:48 04/30/06 (1)
  • Re: no, TDSL shows different pinouts...only recommended sub is 7591-A..nt - Fatcobra 10:09:20 05/01/06 (0)
• Who knows what tools work with carbon fiber in resin? - bartc 16:32:34 04/30/06 (6)
  • You need a third opinion - M.Stojek 08:01:13 05/05/06 (3)
    • Re: You need a third opinion - bartc 13:43:22 05/05/06 (2)
      • Re: You need a third opinion - M.Stojek 05:03:23 05/06/06 (1)
        • Don't know the answer as yet - bartc 06:15:26 05/06/06 (0)
  • Re: Who knows what tools work with carbon fiber in resin? - moray james 16:03:33 05/01/06 (0)
  • Some limited experience. - Poindexter 18:22:06 04/30/06 (0)
• Budget AC Outlet recommendation for DIY Hydra - Kent 15:10:21 04/30/06 (5)
  • Re: Budget AC Outlet recommendation for DIY Hydra - Kent 21:12:48 05/01/06 (0)
  • Re: Budget AC Outlet recommendation for DIY Hydra - Duster 13:17:32 05/01/06 (0)
  • Re: Budget AC Outlet recommendation for DIY Hydra - blake 18:11:49 04/30/06 (0)
  • Yes - bartc 16:29:30 04/30/06 (0)
  • Hubbell HBL5362 - Panelhead 16:19:06 04/30/06 (0)
• Anybody tried Herbie's Halo rings in the middle of a power cord ? - tonemaniac 09:26:31 04/30/06 (23)
  • Re: Anybody tried Herbie's Halo rings in the middle of a power cord ? - Mike B. 12:33:48 04/30/06 (15)
    • These pics really ought to be LOTS smaller. (NT) - jeffreybehr 14:38:32 04/30/06 (12)
      • Re: These pics really ought to be LOTS smaller. We want less detail? Why? still on dial up? n/t - Awe-d-o-file 17:11:38 05/01/06 (10)
        • This is a 100K image and has plenty of detail... - Rob Thomas 17:03:12 05/02/06 (7)
          • Those speakers... - TopPop 19:42:31 05/03/06 (3)
            • The scary thing is... - Rob Thomas 20:05:04 05/03/06 (2)
              • $1900?? You robbed the poor guy, Rob... ;D -nt- - TopPop 20:15:14 05/03/06 (1)
                • Re: $1900?? You robbed the poor guy, Rob... - Rob Thomas 20:42:01 05/03/06 (0)
          • Re: This is a 100K image and has plenty of detail... - uwe 07:27:28 05/03/06 (1)
            • Why yes, you are indeed correct. (nt) - Rob Thomas 09:07:27 05/03/06 (0)
          • Certainly it does, and mine, too, do, and I, too, use PS. - jeffreybehr 18:12:30 05/02/06 (0)
        • Nope. Even at 5Mbps it takes too long and occupies too much screen space. - jeffreybehr 17:26:34 05/01/06 (1)
          • Oops...that's 40KBs. (NT) - jeffreybehr 20:31:04 05/01/06 (0)
      • Yup. Photoshop will optimize to file size, first resize image to 144 dpi, then optimize to c. 100K (NT) - Rob Thomas 13:26:31 05/01/06 (0)
    • Re: Anybody tried Herbie's Halo rings in the middle of a power cord ? - tonemaniac 12:43:33 04/30/06 (1)
      • Re: Anybody tried Herbie's Halo rings in the middle of a power cord ? - Mike B. 19:22:10 04/30/06 (0)
  • Re: almost garantee.. - Fatcobra 11:12:24 04/30/06 (6)
    • ah, there's the rub... - tonemaniac 12:46:52 04/30/06 (5)
      • Re: sounds like u're using a rack.. - Fatcobra 19:31:07 05/02/06 (0)
      • neat photo of aerogel... NASA is hogging the good stuff - tonemaniac 12:59:48 04/30/06 (3)
        • Wish they had tiny beads of Aerogel - scruffy_ 09:55:51 05/01/06 (2)
          • AEROGEL! AEROGEL! Get yer' Aerogel here! - Rob Thomas 13:34:32 05/01/06 (1)
            • Very cool Aerogel pic... - Rob Thomas 13:37:55 05/01/06 (0)
• Speaker wiring XO/ohm Question - Frank J M 07:26:17 04/30/06 (2)
  • Re: Speaker wiring XO/ohm Question - Ron Oehlert 09:03:50 04/30/06 (0)
  • Re: - Fatcobra 08:21:16 04/30/06 (0)
• T/S query:: is "Rms = Zmin - Re"? - Mart 04:36:11 04/30/06 (0)
• Isolation transformer 120/ 240V primary/ Balanced 60V-0V-60V secondary - jea48 17:14:37 04/29/06 (21)
  • Loading, or lack of - Jon Risch 21:47:42 04/30/06 (8)
    • New multimeter....... - jea48 12:03:19 07/02/06 (0)
    • As mentioned in other posts, there is no ground reference on the secondary side, unless you provide one at the secondary - jea48 16:58:44 05/03/06 (4)
      • Yep - Jon Risch 21:49:57 05/03/06 (3)
        • Let me try again. - jea48 17:36:59 05/04/06 (2)
          • Re: Let me try again. - Jon Risch 20:28:00 05/04/06 (1)
            • Re: Let me try again. - jea48 19:20:16 05/08/06 (0)
    • Re: Loading, or lack of - jea48 20:59:30 05/01/06 (1)
      • Re: Loading, or lack of - Jon Risch 21:02:50 05/03/06 (0)
  • Re: (?)Isolation transformer 120/ 240V primary/ Balanced 60V-0V-60V secondary - cdb 15:21:43 04/30/06 (1)
    • I agree. - jea48 16:39:01 04/30/06 (0)
  • Try it this way - Russ57 09:34:55 04/30/06 (1)
    • Re: Try it this way - jea48 10:49:29 04/30/06 (0)
  • Re: Isolation transformer 120/ 240V primary/ Balanced 60V-0V-60V secondary - SysInfo 23:19:31 04/29/06 (6)
    • Thank you for your response. - jea48 08:09:47 04/30/06 (5)
      • Agree. - Al Sekela 14:11:03 04/30/06 (2)
        • Re: Agree. - jea48 19:23:12 04/30/06 (0)
        • Re: Agree. - jea48 14:25:14 04/30/06 (0)
      • try this - Tweekeng 11:09:42 04/30/06 (1)
        • Re: try this - jea48 14:25:54 04/30/06 (0)
  • Final test. - jea48 18:13:43 04/29/06 (0)
• advantage to series zeners?? - Vynuhl.Addict 16:20:53 04/29/06 (2)
  • Re: advantage to series zeners?? - djk 18:28:37 04/29/06 (1)
    • The sound difference is so true.. - Vynuhl.Addict 03:49:27 04/30/06 (0)
• Input Switcher - Easy question - Fishfood 14:51:45 04/29/06 (1)
  • Re: Input Switcher - Easy question - Fishfood 17:24:16 04/29/06 (0)
• preamp balance problem - twc5964 11:44:04 04/29/06 (4)
  • Re: preamp balance problem - twc5964@charter.net 04:54:07 04/30/06 (3)
    • Re: preamp balance problem - twc5964@charter.net 13:06:47 04/30/06 (0)
    • Re: clean, or try a new balance pot, or bypass it all together...nt - Fatcobra 08:24:23 04/30/06 (1)
      • Re: clean, or try a new balance pot, or bypass it all together...nt - twc5964@charter.net 22:15:15 05/02/06 (0)
• Oyaide fans are going to love this - eduardoo 06:49:03 04/29/06 (4)
  • Now if they'd add some diamond into their plastic - tonemaniac 11:24:05 04/29/06 (0)
  • Re: Oyaide fans are going to love this - Duster 07:48:38 04/29/06 (2)
    • Re: Oyaide fans are going to love this - jts 10:40:51 04/29/06 (1)
      • Re: Oyaide fans are going to love this - Joseph Cohen 23:31:08 05/01/06 (0)
• ers paper - how to use on cables and gear - clubmyke 01:25:43 04/29/06 (6)
  • In CD players - unclestu52 01:44:40 04/29/06 (5)
    • Re: In CD players - bernard991 07:34:52 04/29/06 (0)
    • Has the adhesive backed ERS been discontinued ? - tonemaniac 03:41:57 04/29/06 (3)
      • Re: Has the adhesive backed ERS been discontinued ? - unclestu52 10:54:39 04/29/06 (2)
        • Re: Has the adhesive backed ERS been discontinued ? - Brent in TO 06:45:22 05/03/06 (1)
          • It costs a lot...... - unclestu52 11:03:53 05/05/06 (0)
• tentlabs into the Musichall CD25 - bernard991 10:10:06 04/28/06 (1)
  • What is it you're having trouble with? - Jim Hagerman 22:18:18 05/07/06 (0)
• CRYOED SILVER WIRE - basilio89@hotmail.com 07:29:13 04/28/06 (11)
  • Cryo'd or not, I recall lots of dialogue about the highest degree of purity achievable... - jeffreybehr 09:58:43 04/28/06 (0)
  • Re: CRYOED SILVER WIRE - ChrisVH 09:01:58 04/28/06 (9)
    • Re: Please explain further. [nt] - alan m. kafton 23:34:17 04/28/06 (8)
      • Some speculation... - Ted Smith 17:02:04 04/30/06 (0)
      • Re: Please explain further. [nt] - ChrisVH 05:48:15 04/29/06 (6)
        • Re: Please explain further. - alan m. kafton 16:14:24 04/30/06 (2)
          • Re: Please explain further. - ChrisVH 16:28:51 04/30/06 (1)
            • Re: Please explain further. - MikeInSeattle 18:07:50 05/01/06 (0)
        • Agreed - badman 19:24:41 04/29/06 (2)
          • Re: But not.... - alan m. kafton 20:29:10 04/29/06 (1)
            • Re: But not.... - basilio89@hotmail.com 13:28:48 05/01/06 (0)
• Some thoughts on tweaks carried out on the x-dac3 - zanash 07:23:02 04/28/06 (3)
  • Re: Some thoughts on tweaks carried out on the x-dac3 - zanash 08:59:35 04/28/06 (2)
    • Re: (Translated) Some thoughts on tweaks carried out on the x-dac3 - jts 10:30:16 04/29/06 (1)
      • Ignore my above post-wrong thread reply (NT) - jts 10:42:38 04/29/06 (0)
• SilClear needs burn-in time? - Mandarinus 13:17:40 04/27/06 (11)
  • Oh My God - nightdoggy 04:52:37 05/03/06 (0)
  • Re: SilClear needs burn-in time? - Mandarinus 06:21:11 04/30/06 (0)
  • Re: SilClear needs burn-in time? - pmrodier 21:57:23 04/27/06 (0)
  • needs burn-in time? - Bare 20:19:34 04/27/06 (6)
    • Re: needs burn-in time? - Mandarinus 01:25:15 04/28/06 (4)
      • Re: needs burn-in time? - pkell44 11:13:46 05/05/06 (0)
      • Re: needs time? - Bare 21:20:41 04/28/06 (2)
        • Re: needs time? - pkell44 11:16:50 05/05/06 (0)
        • Silver tarnish is conductive. - snert 06:20:52 04/29/06 (0)
    • I agree - snert 21:06:05 04/27/06 (0)
  • Yes it does. Consider trying a week of burn in before judging. nt - bartc 13:30:07 04/27/06 (0)
• Need help identifying this vibration control device, and ideas for DIY. - TopPop 08:03:21 04/27/06 (9)
  • Thanks for all of the help and ideas, guys! I'll keep you posted on results. -nt- - TopPop 08:24:19 04/28/06 (0)
  • I suspect they might be HRS damping plates... - Wellfed 19:12:09 04/27/06 (4)
    • That's exactly what it was! Thanks! Any DIY ideas? -nt- - TopPop 19:59:18 04/27/06 (3)
      • Get yourself a sheet of Dynamat X-treme - Al Sekela 13:47:20 04/29/06 (0)
      • Re: That's exactly what it was! Thanks! Any DIY ideas? -nt- - clio09 21:56:10 04/27/06 (0)
      • The website states they are aircraft grade aluminum... - Wellfed 21:27:30 04/27/06 (0)
  • Re: Need help identifying this vibration control device, and ideas for DIY. - Rob Thomas 15:57:27 04/27/06 (0)
  • Re: Need help identifying this vibration control device, and ideas for DIY. - Pjay 09:02:23 04/27/06 (1)
    • Duh! Dumbells! - TopPop 10:00:32 04/27/06 (0)
• Corner Bass Trapping Question - greg7 06:44:04 04/27/06 (1)
  • Re: Corner Bass Trapping Question - Kal Rubinson 10:42:04 04/27/06 (0)
• GramAmp 2 phono - battery power? - Aleksunder 06:03:01 04/27/06 (0)

  Previous Page

Threads started on or before 04/26/06 are archived Here.
Threads started on or before 04/08/06 are archived Here.
Threads started on or before 03/06/06 are archived Here.
Threads started on or before 02/17/06 are archived Here.
Threads started on or before 02/04/06 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2006, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---