|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Oyaide fans are going to love this posted by jts on April 29, 2006 at 10:40:51:
We thoroughly tested several dozen combinations of plating methods selecting the very best, platinum + palladium, for our flagship model, the F1/M1. The first layer is 0.5 μ (microns) of Platinum, followed by the second layer of Palladium which is 0.3 μ in thickness. The initial shaping of the contact is done via an automated mill. This is followed by a manual polishing which is done before the first direct plating layer and again before the final plating. This process is unique and unparalleled and achieves a mirror finish. The use of Beryllium Copper provides a high level of conductivity and at the same time a high level of mechanical integrity, both appropriate qualities for a flagship level product. Heat treatment is applied to enhance its machine-ability. Its rigidity and thickness (1.0mm thick and 6.0mm wide) increases the holding capacity of the plug to 8kg and minimizes vibrations which would otherwise degrade the transmission of energy.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Oyaide fans are going to love this - Joseph Cohen 23:31:08 05/01/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
