|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Oyaide fans are going to love this posted by Duster on April 29, 2006 at 07:48:38:
Hope this helps, someone try it :)
F1/M1 tests plating which reaches to several dozen types thoroughly, selecting the suitable combination in the flagship model, platinum + palladium. The platinum of 1st layer 0.5 μ, administered the palladium of 2nd layer with the thickness 0.3 μ. In order to finish F1/M1 in the ultimate product, it starts from foundation processing of plating. The material which is driven out as the part is ground the barrel mechanically and after that, administers one one buff grinding with human interlude. The grinding process which crosses these 2 times the example which is applied as one for audio is unparalleled in other things. Mirror surface finish, and direct plating. Therefore simple very it makes and frame must be. It meaning philosophy of オヤイデ electricity and that craftsmanship is condensed, it does even here. It possesses high conductivity in the blade of F1/M1, adopting the beryllium copper which at the same time holds sufficient mechanical quality. It is selection of the suitable material in the flagship model. In addition, the beryllium copper with the alloy which is rich in quite aging characteristic, quite could give high machine quality with heat treatment. Furthermore, the blade of M1 has the touch area and rigidity of high level of thickness 1.0mm and width, 6.0mm actualizing the tough hold impression of calling above increase weight 8kg. Because of this actualizing the decrease of the vibration of the joint and the transmission which does not have loss. 2 time enhancing later, platinum (0.5 μ) + palladium (0.3 μ) 2 layer plating
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Oyaide fans are going to love this - jts 10:40:51 04/29/06 (1)
- Re: Oyaide fans are going to love this - Joseph Cohen 23:31:08 05/01/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
