Tech Square Technical and speculative discussion of amps, cables and other topics.

For Sale Ads FAQ / News / Events

AudioAsylum Trader Philips ECG 6550 NIB Quad - Here is one matched quad made in the USA by Philip... KimberKable Hero - Switched out to Analysis Plus Ovals. Kimbers were...

• Denon POA-2200 Power Amp repaired but getting hot.....any ideas??! - doctorhugocat 16:26:21 04/02/13 (3)
  • RE: Denon POA-2200 Power Amp repaired but getting hot.....any ideas??! - doctorhugocat 15:13:56 04/03/13 (1)
    • RE: Denon POA-2200 Power Amp repaired but getting hot.....any ideas??! - Blackdog 18:35:41 04/09/13 (0)
  • RE: Denon POA-2200 Power Amp repaired but getting hot.....any ideas??! - 6bq5 09:31:09 04/03/13 (0)
• Power Conditioner?? - Moogerfooger 18:16:51 02/19/13 (5)
  • RE: Power Conditioner?? - 6bq5 16:38:42 03/07/13 (1)
    • RE: Power Conditioner?? - pictureguy 11:59:44 03/22/13 (0)
  • RE: Power Conditioner?? - fantja 15:38:03 03/04/13 (0)
  • RE: Power Conditioner - unclestu 19:17:59 02/19/13 (1)
    • RE: Power Conditioner - pictureguy 12:02:25 03/22/13 (0)
• Are there any "issues" with the use of a transformer in place of an output coupling cap (to stop DC)? - andyr 15:18:07 12/18/12 (3)
  • RE: Are there any "issues" with the use of a transformer in place of an output coupling cap (to stop DC)? - tesla 08:32:10 01/15/13 (2)
    • RE: "issues" ...coupling cap (to stop DC)? - grhughes 05:05:01 02/17/13 (0)
    • Yes, I did ... - andyr 11:06:31 01/15/13 (0)
• Wall wart - DTF 09:42:27 12/11/12 (1)
  • RE: Wall wart - Bill Way 19:38:32 12/12/12 (0)
• Induction interference - terra3 09:44:55 12/09/12 (1)
  • RE: Induction interference - Bill Way 13:24:48 12/10/12 (0)
• Sub for 4558? - tesla 10:41:13 12/06/12 (0)
• Lambda power supply... - Dman 06:07:40 11/26/12 (1)
  • RE: Lambda power supply... - Chinacave 12:10:21 03/01/13 (0)
• Tripath amps have no crossover distortion ? feedback ? - tjnailit 17:24:17 11/07/12 (1)
  • RE: Tripath amps have no crossover distortion ? feedback ? - unclestu 21:46:34 11/07/12 (0)
• RFI that affects phono - stevenwmc 04:11:43 09/25/12 (2)
  • RE: RFI that affects phono - andyr 16:07:02 12/18/12 (1)
    • RE: RFI that affects phono - Bill Way 13:48:30 12/20/12 (0)
• C-J PF-R preamp: "All digital IC's are blown, not worth repairing" - WoodyWW 10:47:23 09/20/12 (6)
  • Lightning is totally un-predictable! - grhughes 02:57:35 02/18/13 (0)
  • RE: C-J PF-R preamp: "All digital IC's are blown, not worth repairing" - pictureguy 20:07:28 11/22/12 (0)
  • My sincere sympathies.... - unclestu 13:05:19 09/21/12 (3)
    • RE: My sincere sympathies.... - WoodyWW 08:18:46 09/22/12 (2)
      • Lightning protection - jea48 16:47:16 11/13/12 (0)
      • Surge.. - unclestu 13:59:54 09/24/12 (0)
• replacing a silicon rectifier with a diode - Camrahnbay 16:08:21 09/09/12 (2)
  • RE: replacing a silicon rectifier with a diode - Lee of Omaha 09:35:28 09/12/12 (1)
    • RE: replacing a silicon rectifier with a diode - pictureguy 12:07:41 03/22/13 (0)
• Help, Anyone? Need Schematic/info on two amps - Lee of Omaha 11:15:52 08/21/12 (0)
• Factory fabricated board solder? - mashley 13:25:04 06/10/12 (4)
  • RE: Factory fabricated board solder? - unclestu 15:56:20 06/13/12 (2)
    • RE: Factory fabricated board solder? - Tweekeng 06:42:24 06/14/12 (1)
      • RE: Factory fabricated board solder? - unclestu 14:55:21 06/18/12 (0)
  • RE: Factory fabricated board solder? - 6bq5 12:15:08 06/11/12 (0)
• Speaker hum from Aquarium flourescents. - jerrygp 15:09:26 06/09/12 (2)
  • RE: Speaker hum from Aquarium flourescents. - jerrygp 10:19:56 06/10/12 (1)
    • RE: Speaker hum from Aquarium flourescents. - 6bq5 12:23:45 06/11/12 (0)
• Fixed my "vintage" Proceed remote control - mr.bear 11:02:20 06/08/12 (5)
  • RE: Fixed my "vintage" Proceed remote control - pictureguy 23:15:45 11/07/12 (0)
  • RE: Fixed my "vintage" Proceed remote control - Crazy Dave 14:56:31 10/11/12 (0)
  • RE: Fixed my "vintage" Proceed remote control - pictureguy 10:37:20 06/13/12 (0)
  • RE: Fixed my "vintage" Proceed remote control - mashley 13:21:29 06/10/12 (1)
    • RE: Fixed my "vintage" Proceed remote control - pictureguy 21:16:16 06/14/12 (0)
• Burwen 1201 does not seem to be working - bierbier@gmail.com 15:01:36 03/26/12 (0)
• Another Subwoofer Hum Question - Lee of Omaha 08:06:55 02/12/12 (3)
  • RE: Another Subwoofer Hum Question - Eli47 19:02:47 05/20/12 (0)
  • Solved it! - Lee of Omaha 10:42:52 02/17/12 (1)
    • RE: Solved it! - pictureguy 23:44:06 02/29/12 (0)
• Stabilize Analog Milliammeter - shermanr@prw.net 10:34:04 02/05/12 (2)
  • RE: Stabilize Analog Milliammeter - clifff 02:26:51 02/06/12 (1)
    • RE: Stabilize Analog Milliammeter - shermanr@prw.net 09:35:32 02/07/12 (0)
• What type crossover slope is this ? - tjnailit 16:38:41 01/22/12 (2)
  • RE: What type crossover slope is this ? - Eli47 18:50:30 05/20/12 (0)
  • RE: What type crossover slope is this ? - neolith 19:40:35 02/15/12 (0)
• Sony BDP S380....disc will not return to DSD Multi playback. - Rob48 07:58:22 01/11/12 (1)
  • RE: Sony BDP S380....disc will not return to DSD Multi playback. - Rob48 08:46:03 01/11/12 (0)
• Subwoofer hum question. - Conductor 12:30:28 11/18/11 (2)
  • RE: Subwoofer hum question. - tmsorosk 17:56:57 01/10/12 (0)
  • RE: Subwoofer hum question. - servasol 19:28:49 11/19/11 (0)
• bad Capacitors? - cpielock@eaglebrook.org 07:28:22 11/18/11 (4)
  • RE: bad Capacitors - unclestu 16:37:27 11/30/11 (2)
    • RE: bad Capacitors - pictureguy 19:04:58 02/18/12 (0)
    • RE: bad Capacitors - mashley 20:55:07 12/21/11 (0)
  • RE: bad Capacitors? - pictureguy 21:48:35 11/25/11 (0)
• Heathkit IB-2 Impedance Bridge - strijw426 07:54:01 10/01/11 (3)
  • RE: Heathkit IB-2 Impedance Bridge - 6bq5 15:50:00 10/04/11 (2)
    • RE: Heathkit IB-2 Impedance Bridge - strijw426 16:11:42 10/04/11 (1)
      • RE: Heathkit IB-2 Impedance Bridge Repair - strijw426 16:45:24 10/08/11 (0)
• The McAdam tester - used-hifi 15:42:46 08/03/11 (0)
• I'm Learning to Hate SAE - Lee of Omaha 09:07:58 07/01/11 (5)
  • RE: I'm Learning to Hate SAE - Bill Way 20:13:28 07/06/12 (0)
  • RE: I'm Learning to Hate SAE - Picklesnapper 12:47:47 10/12/11 (0)
  • RE: I'm Learning to Hate SAE - tmsorosk 06:29:14 07/24/11 (1)
    • RE: I'm Learning to Hate SAE - Lee of Omaha 11:19:27 10/26/11 (0)
  • RE: I'm Learning to Hate SAE - pictureguy 11:42:46 07/14/11 (0)
• what's the difference between 'hot' and 'neutral' in 240v AC power? - Tom Schuman 18:52:26 06/19/11 (8)
  • No difference only the voltage and frequency have changed - Tweekeng 21:16:36 06/21/11 (4)
    • RE: No difference only the voltage and frequency have changed - coffee-phil 15:47:55 09/09/11 (1)
      • RE: No difference only the voltage and frequency have changed - Mushroom Soup 11:07:03 09/29/12 (0)
    • RE: No difference only the voltage and frequency have changed - Tom Schuman 00:19:29 06/22/11 (1)
      • RE: No difference only the voltage and frequency have changed - jea48 07:08:38 06/22/11 (0)
  • RE: what's the difference between 'hot' and 'neutral' in 240v AC power? - jea48 21:15:19 06/21/11 (1)
    • thanks that's just what I was looking for. nt - Tom Schuman 00:15:48 06/22/11 (0)
  • RE: what's the difference between 'hot' and 'neutral' in 240v AC power? - 6bq5 09:53:27 06/21/11 (0)
• Impedence Question - dkingston 14:03:22 06/09/11 (2)
  • RE: Impedence Question - Todd Krieger 19:45:19 06/28/11 (0)
  • RE: Impedence Question - pictureguy 00:47:04 06/12/11 (0)
• drop ceiling install - Quiltface 10:07:34 06/01/11 (1)
  • Sounds like a - unclestu 15:46:30 06/02/11 (0)
• Jolida JD-9 wierdness - jkaschyk 16:37:15 05/23/11 (0)
• Turn off thump from power amp. - Cougar 07:48:09 05/10/11 (2)
  • RE: Turn off thump from power amp. - unclestu 15:01:19 05/17/11 (1)
    • RE: Turn off thump from power amp. - Cougar 06:46:23 05/20/11 (0)
• Crossover help - jeep8589@yahoo.com 17:42:31 03/24/11 (1)
  • RE: Crossover help - pictureguy 14:47:31 04/02/11 (0)
• Is there a specific upsampling technique that is more effective? - barryb 13:48:09 03/06/11 (3)
  • RE: Is there a specific upsampling technique that is more effective? - Tom Schuman 18:20:58 06/20/11 (0)
  • You can't get somthing from nothing. - Tweekeng 19:54:33 03/06/11 (1)
    • Ageed, but I wasn't talking about ripping - barryb 20:02:42 03/07/11 (0)
• Levinson upgrades - tmsorosk 14:24:39 02/21/11 (2)
  • RE: Levinson upgrades - fantja 05:42:53 05/23/11 (1)
    • RE: Levinson upgrades - tmsorosk 06:33:58 07/24/11 (0)
• High Pass Slope Using Balanced XLR? - speakertweaker 08:22:00 02/16/11 (1)
  • RE: High Pass Slope Using Balanced XLR? - speakertweaker 11:26:03 02/28/11 (0)
• Electrical sub panel - tmsorosk 06:20:34 02/16/11 (4)
  • RE: Electrical sub panel - unclestu 12:00:12 03/07/11 (0)
  • RE: Electrical sub panel - mcgjohn@yahoo.com 10:09:29 03/07/11 (2)
    • RE: Electrical sub panel - tmsorosk 10:48:16 03/07/11 (1)
      • RE: Electrical sub panel - mcgjohn@yahoo.com 10:26:07 03/15/11 (0)
• Odd means of lighting an LED in YBA Integre DT. - h_h 13:27:15 01/25/11 (4)
  • RE: Odd means of lighting an LED in YBA Integre DT. - Nagratech 08:17:57 01/26/11 (3)
    • RE: Odd means of lighting an LED in YBA Integre DT. - h_h 11:27:17 01/27/11 (2)
      • RE: Odd means of lighting an LED in YBA Integre DT. - Michel 20:48:16 02/03/11 (1)
        • Thanks, I didn't see it, but I'll look again. - h_h 10:22:57 02/04/11 (0)
• Ultrasound Playback on Commercial Sound Card - dbaharoni@gmail.com 11:05:23 01/24/11 (0)
• 17v adapter for thorens 321 - cpielock@eaglebrook.org 21:04:13 01/06/11 (2)
  • RE: 17v adapter for thorens 321 - Lee of Omaha 08:52:30 08/28/11 (0)
  • RE: 17v adapter for thorens 321 - Tweekeng 06:43:06 01/07/11 (0)
• Resistor noise on AUDIO applications - megalomaniac 18:51:59 11/27/10 (3)
  • RE: Resistor noise on AUDIO applications - TimFox 14:33:03 08/05/11 (0)
  • RE: Resistor noise on AUDIO applications - 13th Duke of Wymbourne 17:06:17 12/01/10 (1)
    • RE: Resistor noise on AUDIO applications - mcgjohn@yahoo.com 18:50:33 01/07/11 (0)
• 110/220V Taps (Long) - Ron944 08:15:50 10/22/10 (4)
  • Only sure way is to contact the manufacture. Or get a hold of a schematic - jea48 20:57:41 10/23/10 (0)
  • RE: 110/220V Taps (Long) - Tweekeng 10:48:38 10/23/10 (2)
    • RE: 110/220V Taps (Long) - Ron944 11:28:11 10/23/10 (1)
      • Yes. I would assume then it is correct. but you need to check it BEFORE you plug it into 220volts. Just sayin' - Elizabeth 13:34:29 05/21/11 (0)
• Using my O'Scope with my system - tesla 14:57:37 10/17/10 (2)
  • RE: Using my O'Scope with my system - Tweekeng 15:40:06 10/17/10 (1)
    • RE: Using my O'Scope with my system - pictureguy 12:36:39 01/29/11 (0)
• Electrical outlet cover - MGH 23:13:30 09/27/10 (2)
  • Using a non contact voltagedetector, i noted that metal plates do not allow crap from the wall to emanate out - Elizabeth 13:32:56 05/21/11 (0)
  • I can't imagine it making any difference at all beyond aesthetics... - Tweekeng 16:29:35 10/02/10 (0)
• Quizzle me this, techmeisters - Lee of Omaha 13:14:44 09/21/10 (5)
  • RE: Quizzle me this, techmeisters - shermanr@prw.net 17:45:41 10/03/10 (4)
    • RE: Quizzle me this, techmeisters - Lee of Omaha 17:10:17 10/05/10 (3)
      • RE: Quizzle me this, techmeisters - shermanr@prw.net 13:47:29 10/09/10 (2)
        • Great Post! - Lee of Omaha 08:00:19 10/10/10 (1)
          • RE: Great Post! - shermanr@prw.net 13:38:26 10/10/10 (0)
• Tuner Issues; Right Channel keeps cutting in and out, repair possible? - TubeAcolyte 13:41:22 09/13/10 (3)
  • RE: Tuner Issues; Right Channel keeps cutting in and out, repair possible? - bassbinotoko 12:59:53 09/14/10 (1)
    • RE: Tuner Issues; Right Channel keeps cutting in and out, repair possible? - TubeAcolyte 16:55:57 09/23/10 (0)
  • Sounds like a dirty selector switch or pot.... - Tweekeng 20:16:41 09/13/10 (0)
• Filtering digital noise on pin 1 (XLR balanced) - robertopisa 05:27:36 09/13/10 (0)
• What did I do? - jkaschyk 12:57:27 07/08/10 (1)
  • Never mind - jkaschyk 13:51:48 07/08/10 (0)
• Hi, I Need Help! All of a sudden I have been getting noise and,,, - Hiendmuse 13:25:49 06/13/10 (2)
  • RE: Hi, I Need Help! All of a sudden I have been getting noise and,,, - shermanr@prw.net 15:36:57 06/29/10 (1)
    • RE: Hi, I Need Help! All of a sudden I have been getting noise and,,, - Hiendmuse 10:58:58 07/01/10 (0)
• Best way to hook up subwoofer - jrichelsen@gmail.com 13:21:37 06/04/10 (1)
  • Try it both ways... Whatever sounds best, is best. - SF tech 16:52:03 06/17/10 (0)
• Best way to hook up subwoofer - jrichelsen@gmail.com 12:21:07 06/04/10 (1)
  • RE: Best way to hook up subwoofer - mikee55 04:48:52 01/19/11 (0)
• Are 63 V smoothing capacitors too tight for my power amp? - megalomaniac 23:23:07 05/20/10 (7)
  • Stick to 80V rated cap. - akltam 00:30:00 09/25/11 (0)
  • RE: Are 63 V smoothing capacitors too tight for my power amp? - pictureguy 13:10:55 05/25/10 (3)
    • RE: Are 63 V smoothing capacitors too tight for my power amp? - megalomaniac 13:40:29 05/25/10 (2)
      • RE: Are 63 V smoothing capacitors too tight for my power amp? - pictureguy 20:32:44 05/25/10 (1)
        • RE: Are 63 V smoothing capacitors too tight for my power amp? - mcgjohn@yahoo.com 10:50:26 07/15/10 (0)
  • RE: Are 63 V smoothing capacitors too tight for my power amp? - megalomaniac 01:08:41 05/21/10 (0)
  • RE: Are 63 V smoothing capacitors too tight for my power amp? - pictureguy 00:29:47 05/21/10 (0)
• My first SS repair, I need some help - henrybasstardo 17:59:37 05/19/10 (5)
  • RE: My first SS repair, I need some help - mikee55 04:58:35 01/19/11 (0)
  • RE: My first SS repair, I need some help - pictureguy 19:29:08 05/19/10 (3)
    • RE: My first SS repair, I need some help - henrybasstardo 19:41:48 05/19/10 (2)
      • clarification - henrybasstardo 19:48:39 05/19/10 (1)
        • RE: clarification - pictureguy 21:17:47 05/19/10 (0)
• caps - dstaff8321 14:40:44 05/15/10 (2)
  • RE: caps - headphonejack 11:51:24 05/16/10 (1)
    • RE: caps - dstaff8321 12:57:20 05/16/10 (0)
• Help with identification of rectifier diode ... - megalomaniac 03:04:14 05/10/10 (3)
  • RE: Help with identification of rectifier diode ... - Tweekeng 21:33:57 05/14/10 (1)
    • RE: Help with identification of rectifier diode ... - megalomaniac 03:05:20 05/15/10 (0)
  • Front picture - megalomaniac 03:10:04 05/10/10 (0)
• Changing the LED dispay input names on a Outlaw RR2150. - StereoGen 13:05:36 05/09/10 (0)
• Receiver Amp and Cat5 Network Cable? - MPDano 06:49:26 04/22/10 (1)
  • RE: Receiver Amp and Cat5 Network Cable? - jea48 16:40:35 04/23/10 (0)
• Accuphase P300 Problem - fast996@worldnet.att.net 19:44:24 04/21/10 (0)
• So you can hear your neighbor playing music!!! - EngHelp 19:44:21 04/7/10 (34)
  • Typical STC of walls of appartments built to the UBC is ... - gymwear5@hotmail.com 11:48:33 06/02/10 (0)
  • RE: So you can hear your neighbor playing music!!! - pictureguy 01:20:40 05/24/10 (0)
  • I have a French Horn player - Bill Way 22:34:40 05/21/10 (0)
  • NYE is different... - bassbinotoko 02:12:30 04/21/10 (0)
  • RE: So you can hear your neighbor playing music!!! - Dman 15:57:52 04/20/10 (0)
  • So you can hear your neighbor playing music!!! - Bill of Greater NY 14:14:00 04/14/10 (0)
  • Welcome! You must be a registered Inmate to post in this Asylum. - Ray Moth 06:22:45 04/13/10 (0)
  • No, let's not assume nt - keith_d 19:46:30 04/8/10 (0)
  • One time, at band camp... - Enophile 19:27:11 04/8/10 (0)
  • RE: So you can hear your neighbor playing music!!! - RickeyM 19:23:37 04/8/10 (0)
  • RE: So you can hear your neighbor playing music!!! - Hi-Fidelity 17:19:45 04/8/10 (0)
  • I once had downstairs neighbors that used a timer too... - rewind67 12:15:20 04/8/10 (3)
    • RE: I once had downstairs neighbors that used a timer too... - Dman 13:32:34 04/8/10 (0)
    • yep.. where I USED to live the same stuff... Now it's peaceful over '55' apts.. NICE - Elizabeth 13:14:39 04/8/10 (1)
      • RE: yep.. where I USED to live the same stuff... Now it's peaceful over '55' apts.. NICE - Dman 13:36:40 04/8/10 (0)
  • I had some inconsiderate neighbors once - badman 12:04:37 04/8/10 (0)
  • My neighbor across the street - felrob 11:43:15 04/8/10 (1)
    • You should have tried Stravinsky... nt - Dman 13:38:13 04/8/10 (0)
  • RE: Only When They Have A Party In The Back Yard !!!! - Vinylly 10:10:49 04/8/10 (2)
    • RE: Only When They Have A Party In The Back Yard !!!! - Daverz 15:49:37 04/8/10 (0)
    • Puente of mispelled words there...N/T - musetap 11:03:21 04/8/10 (0)
  • Back in my apartment days . . . - caspian@peak.org 09:17:36 04/8/10 (1)
    • "Swiss Yodel Party" - LOL!. - andy_c 12:42:20 04/8/10 (0)
  • No, but they can hear my music - Frihed89 23:46:19 04/7/10 (5)
    • Be friendly, and ominously polite, - Larry I 05:23:15 04/8/10 (4)
      • RE: Be friendly, and ominously polite, - boxhead 13:37:43 04/20/10 (0)
      • Or hang a Confederate flag outside your door, turn it up, and see who knocks. (nt) - rditmars 08:40:37 04/8/10 (2)
        • Carrying on a heated argument with yourself. . . - Larry I 08:51:59 04/8/10 (1)
          • RE: Carrying on a heated argument with yourself. . . - pictureguy 09:56:44 05/26/10 (0)
  • Once while playing Breakfast in America... - Don Till 22:09:27 04/7/10 (0)
  • RE: So you can hear your neighbor playing music!!! - R Browne 21:41:20 04/7/10 (0)
  • No, she hasn't got a stereo. Maybe you should ask her. (nt) - esande 21:15:47 04/7/10 (0)
  • RE: So you can hear your neighbor playing music!!! - highendfan 20:51:05 04/7/10 (0)
  • RE: So you can hear your neighbor playing music!!! My expereince... - Dman 19:57:37 04/7/10 (0)
• Calculating speaker wire gauge - chuck55 02:59:02 03/22/10 (3)
  • RE: Calculating speaker wire gauge - pictureguy 21:23:25 05/19/10 (0)
  • sound engineering practive... - Tweekeng 20:01:17 03/27/10 (1)
    • RE: sound engineering practive... - mcguirek 11:18:41 02/16/11 (0)
• Stromberg AP-55 question - gkargreen 10:22:46 03/09/10 (1)
  • RE: Stromberg AP-55 question - shermanr@prw.net 14:06:01 08/25/10 (0)
• OTTO-1 Tester - shermanr@prw.net 07:44:29 02/11/10 (0)
• Burning In - FRASERSMITH@HOTMAIL.COM 22:13:45 02/02/10 (1)
  • RE: Burning In - mcgjohn@yahoo.com 09:57:28 02/22/10 (0)
• Universal player problem. - jimbill 08:48:14 02/02/10 (0)
• HA12020 IC desperately needed - draka1032 10:04:10 01/28/10 (0)
• The answer is 20 volts - Lee of Omaha 14:32:08 01/15/10 (1)
  • ALWAYS pay close attention to polarity - Tweekeng 11:33:21 01/16/10 (0)
• A shot in the dark (Levinson ML-11). - YRY 13:46:46 01/13/10 (5)
  • RE: A shot in the dark (Levinson ML-11). - Nagratech 12:00:17 01/14/10 (4)
    • Fuses OK. - YRY 11:19:29 01/20/10 (3)
      • RE: Fuses OK. - Nagratech 11:13:21 01/25/10 (2)
        • Thanks for your responses. - YRY 11:46:51 01/25/10 (1)
          • Diode checking - Nagratech 08:36:06 01/28/10 (0)
• Golden-eared metalurgists - does gold poison solder joints? - Francois G 09:01:28 12/21/09 (5)
  • RE: Golden-eared metalurgists - does gold poison solder joints? - shermanr@prw.net 11:13:26 12/23/09 (4)
    • Interesting reference - does gold poison solder joints? - Francois G 12:17:12 12/23/09 (3)
      • RE: Interesting reference - does gold poison solder joints? - shermanr@prw.net 12:23:56 12/23/09 (2)
        • RE: Interesting reference - does gold poison solder joints? - jihad 13:35:46 01/01/10 (0)
        • RE: Does gold poison solder joints? - Francois G 13:53:13 12/23/09 (0)
• Weird - ever heard of this? - bevo 13:27:18 12/14/09 (3)
  • DC voltage on the AC line caused by the dimmer. - jea48 14:24:06 12/18/09 (0)
  • RE: Weird - ever heard of this? - Tre' 17:19:42 12/14/09 (1)
    • RE: Weird - ever heard of this? - GRechnitzer 16:54:36 01/15/10 (0)
• How to clean Chassis/Components ? - eddyvee 11:44:03 12/04/09 (3)
  • RE: How to clean Chassis/Components ? - Lee of Omaha 06:10:52 12/08/09 (2)
    • RE: How to clean Chassis/Components ? - joshie 03:32:48 02/28/10 (1)
      • RE: How to clean Chassis/Components ? - Lee of Omaha 14:09:29 03/21/10 (0)
• Looking for IC Motorola MC1305P - sergio p 04:35:38 11/17/09 (1)
  • RE: Looking for IC Motorola MC1305P - bassbinotoko 23:47:46 01/01/10 (0)
• Krell KRC- 3 pre amp schematic - quad57@sbcglobal.net 19:10:08 11/08/09 (0)
• Soldering Station - jupiterboy 16:47:13 10/24/09 (8)
  • RE: Soldering Station - mcgjohn@yahoo.com 10:06:26 02/22/10 (0)
  • RE: Soldering Station - Drew Eckhardt 20:02:35 11/02/09 (0)
  • RE: Soldering Station - bevo 06:51:14 10/25/09 (5)
    • RE: Soldering Station - Palustris 13:10:39 12/10/09 (2)
      • Me too - Metralla 20:25:24 03/27/10 (1)
        • RE: Me three - Jerry P 12:34:19 04/26/10 (0)
    • ESD Safe? - jupiterboy 08:20:52 10/25/09 (1)
      • RE: ESD Safe? - Lee of Omaha 13:30:25 12/11/09 (0)
• Negative Feedback - Call for Opinions - 6AS7_6SN7 00:40:02 10/16/09 (7)
  • RE: Negative Feedback - Call for Opinions - Ray Moth 16:09:49 03/25/10 (0)
  • RE: Negative Feedback - violates a primary rule of human hearing - Ralph 11:47:25 12/30/09 (0)
  • NFB is needed for imperfect speakers. - kurt s 10:57:08 11/18/09 (0)
  • RE: Negative Feedback - Call for Opinions - shermanr@prw.net 10:20:36 11/15/09 (0)
  • RE: Negative Feedback - Call for Opinions - shermanr@prw.net 07:43:59 10/16/09 (2)
    • I got your message! - 6AS7_6SN7 00:43:48 10/21/09 (1)
      • RE: I got your message! - Palustris 13:03:22 12/10/09 (0)
• Distance from rectifier diodes to smoothing capacitors - megalomaniac 13:01:30 10/08/09 (2)
  • RE: Distance from rectifier diodes to smoothing capacitors - tlenthe 05:26:05 11/16/09 (1)
    • using a rectifier bridge means that one of the diodes is turning off TWICE in each power cycle? - Tweekeng 18:20:30 01/13/10 (0)
• Model for Selenium Rectifier? - Lee of Omaha 17:51:34 10/05/09 (5)
  • RE: Model for Selenium Rectifier? - jerem69 15:03:34 10/13/09 (4)
    • RE: Model for Selenium Rectifier? - jerem69 15:09:43 10/13/09 (3)
      • RE: Model for Selenium Rectifier? - Lee of Omaha 15:37:14 10/13/09 (2)
        • RE: Model for Selenium Rectifier? - jerem69 07:14:56 10/14/09 (1)
          • Good Article - Lee of Omaha 08:47:18 10/14/09 (0)
• Great Mouser story - bevo 20:01:52 09/24/09 (6)
  • RE: Great Mouser story - llwhtt 19:57:55 10/27/09 (5)
    • Mouser is great. I love the projects you can save - Bas Horneman 11:02:56 05/16/11 (4)
      • RE: Mouser is great. I love the projects you can save - quirck 01:14:37 12/03/12 (0)
      • RE: Mouser is great. I love the projects you can save - triamp 02:36:19 04/08/12 (2)
        • Out West there is Fry's Electronics - Lee of Omaha 08:20:49 04/12/12 (1)
          • RE: Out West there is Fry's Electronics - triamp 03:22:59 08/17/12 (0)
• Anybody know where I can get 2 VLSI chips swapped? - LineArrayNut 19:38:15 09/21/09 (0)
• Old transistor identification - bevo 09:40:23 09/21/09 (2)
  • RE: Old transistor identification - stellavox 18:31:56 02/03/10 (0)
  • RE: Old transistor identification - llwhtt 20:03:26 10/27/09 (0)
• Help! Amplifier Maintenance - zach.redeker@gmail.com 14:39:32 09/20/09 (1)
  • RE: Help! Amplifier Maintenance - clifff 14:53:20 09/20/09 (0)
• Sputter/crackle in right channel of old Sony receiver - caspian@peak.org 20:08:52 09/18/09 (1)
  • RE: Sputter/crackle in right channel of old Sony receiver - clifff 06:37:34 09/19/09 (0)
• can you say what a DUMBass? - a2channelman 11:28:49 09/18/09 (1)
  • RE: can you say what a DUMBass? - llwhtt 20:11:40 10/27/09 (0)
• Peerless 17266 value - tapepath 07:08:03 09/17/09 (0)
• Left channel went out on my receiver today - bunni 16:53:42 09/15/09 (1)
  • RE: Left channel went out on my receiver today - Biff 09:50:19 09/16/09 (0)
• Controlling inductor vibration - bevo 20:23:22 09/10/09 (6)
  • RE: Controlling inductor vibration - Nagratech 09:01:37 01/19/10 (0)
  • I'm a little late to the party... - SF tech 14:12:03 09/21/09 (0)
  • RE: Controlling inductor vibration - b.l.zeebub 07:51:26 09/13/09 (3)
    • RE: Controlling inductor vibration - bevo 18:19:08 09/13/09 (2)
      • RE: Controlling inductor vibration - b.l.zeebub 06:42:39 09/14/09 (1)
        • RE: Controlling inductor vibration - Maxamillion 08:26:15 02/24/10 (0)
• Old regulated power supply capacitors (replace) - used-hifi 22:10:16 09/08/09 (1)
  • RE: Old regulated power supply capacitors (replace) - mcgjohn@yahoo.com 10:32:07 02/22/10 (0)
• NAD C-542 Distortion - dalestirling 16:45:28 09/05/09 (1)
  • RE: NAD C-542 Distortion - Biff 18:22:19 09/14/09 (0)
• Terminal2 - Kevan 12:54:25 08/13/09 (1)
  • RE: Terminal2 - hennfarm 23:16:37 08/13/09 (0)
• Terminals - Kevan 08:05:42 08/13/09 (0)
• Upgrading Simple MM Phono Stage - jupiterboy 13:57:56 08/08/09 (3)
  • RE: Upgrading Simple MM Phono Stage - Dman 08:49:15 08/12/09 (2)
    • RE: Upgrading Simple MM Phono Stage - jupiterboy 11:34:17 08/12/09 (1)
      • RE: Upgrading Simple MM Phono Stage - Dman 16:06:14 08/12/09 (0)
• AC regenerator through audio rack causing speaker buzz - Adriel 09:22:14 07/18/09 (17)
  • conclusions - Adriel 22:38:06 12/22/09 (0)
  • The effect on vinyl recording - Adriel 14:25:34 10/31/09 (0)
  • Hello? Answering posters troubleshooting questions may yield valuable data points. n/t - Ugly 07:19:20 10/29/09 (0)
  • The Tripath test - Adriel 16:52:37 10/26/09 (0)
  • RE: AC regenerator through audio rack causing speaker buzz - Adriel 09:57:37 10/25/09 (0)
  • RE: AC regenerator through audio rack causing speaker buzz - shermanr@prw.net 08:27:01 10/11/09 (1)
    • yes i have eliminated then......nt - Adriel 15:02:03 10/30/09 (0)
  • RE: AC regenerator through audio rack causing speaker buzz - Adriel 11:44:29 10/08/09 (3)
    • RE: AC regenerator through audio rack causing speaker buzz - shermanr@prw.net 11:05:27 10/12/09 (1)
      • currently disconnected.....nt - Adriel 15:02:53 10/30/09 (0)
    • RE: AC regenerator through audio rack causing speaker buzz - Adriel 09:37:41 10/10/09 (0)
  • RE: AC regenerator through audio rack causing speaker buzz - casouza 22:27:12 09/02/09 (0)
  • RE: So have you fixed it! (nt) - benie 19:20:47 07/24/09 (0)
  • RE: AC regenerator through audio rack causing speaker buzz - Ugly 22:50:32 07/19/09 (1)
    • RE: AC regenerator through audio rack causing speaker buzz - Adriel 15:06:02 10/30/09 (0)
  • RE: AC regenerator through audio rack causing speaker buzz - benie 04:30:36 07/19/09 (1)
    • RE: AC regenerator through audio rack causing speaker buzz - hennfarm 20:47:46 11/03/09 (0)
• "Smoothing" and low ESR - langel 17:42:10 07/10/09 (1)
  • ESR is a "loss" - clifff 11:02:17 08/12/09 (0)
• Impedance Equalizers & crossovers - sparkless 17:03:30 07/05/09 (3)
  • RE: Impedance Equalizers & crossovers - caspian@peak.org 20:43:42 09/18/09 (0)
  • RE: Impedance Equalizers & crossovers - bassbinotoko 23:06:27 07/08/09 (1)
    • RE: Impedance Equalizers & crossovers - sparkless 21:34:46 07/11/09 (0)
• Star Ground Question - em 14:48:19 06/17/09 (4)
  • RE: Star Ground Question - shermanr@prw.net 13:18:02 06/28/09 (3)
    • RE: Star Ground Question - em 14:43:24 06/29/09 (2)
      • RE: Star Ground Question - jihad 13:43:40 01/01/10 (0)
      • RE: Star Ground Question - shermanr@prw.net 08:55:07 07/02/09 (0)
• Ground (How to test?) - banpuku 14:15:05 05/22/09 (2)
  • RE: Ground (How to test?) - Awe-d-o-file 16:13:32 06/15/09 (0)
  • RE: Ground (How to test?) - shermanr@prw.net 11:00:58 05/29/09 (0)
• Reforming capacitors - Camrahnbay 13:26:32 05/22/09 (5)
  • Google is your friend - 1973shovel 15:29:54 05/30/09 (2)
    • RE: Google is your friend - Camrahnbay 19:40:07 05/31/09 (1)
      • RE: "Still got your bike and ride too?" - 1973shovel 19:01:16 06/01/09 (0)
  • RE: Reforming capacitors - Tweekeng 00:26:32 05/23/09 (1)
    • RE: Reforming capacitors - unclestu52 13:24:49 05/25/09 (0)
• RECORDING DVD-A - stevenmbell 05:13:09 05/21/09 (2)
  • RE: RECORDING DVD-A - bassbinotoko 22:56:53 06/19/09 (1)
    • I use Lplex... its free - ArdRi 12:20:11 08/08/09 (0)
• Recording Cdr's - stevenmbell 04:52:10 05/21/09 (2)
  • RE: Recording Cdr's - casouza 22:37:22 09/02/09 (0)
  • I guess it depends on the quality of your burner... - Tweekeng 06:23:29 05/21/09 (0)
• Opinions and Comments on Equipment Breakin - Frank I 05:18:05 05/12/09 (4)
  • RE: Opinions and Comments on Equipment Breakin - stator_99@yahoo.com 23:20:46 08/01/09 (0)
  • Great troll! :-)) You're getting the responses you envisaged. nt - andyr 19:21:15 05/14/09 (0)
  • My new speakers will not complete the break-in process during my lifetime - Richard BassNut Greene 08:42:22 05/12/09 (0)
  • RE: Opinions and Comments on Equipment Breakin - jdouglas51 07:57:36 05/12/09 (0)
• Advice needed on electronics course for high school students... - MMasztal 17:32:49 05/08/09 (7)
  • RE: Advice needed on electronics course for high school students... - shermanr@prw.net 15:33:38 06/24/09 (0)
  • RE: Advice needed on electronics course for high school students... - shermanr@prw.net 15:23:04 06/24/09 (1)
    • RE: Advice needed on electronics course for high school students... - MMasztal 13:54:36 07/14/09 (0)
  • RE: Advice needed on electronics course for high school students... - shermanr@prw.net 14:57:27 06/24/09 (0)
  • Discontinued RadioShack kit - Bob Stern 00:17:33 05/09/09 (2)
    • Forrest Mimms? - Tweekeng 21:13:09 05/11/09 (1)
      • Thanks for the info... - MMasztal 17:57:48 05/12/09 (0)
• time counter - tesla 11:17:39 04/29/09 (0)
• Frustrated with uptapped potential - eric_solecky 18:03:36 04/24/09 (7)
  • This should do it! - Don Till 11:17:26 06/09/09 (0)
  • RE: Frustrated with uptapped potential - Drew Eckhardt 02:19:23 05/22/09 (0)
  • Get rid of the fish... - Colonel Sanders 08:17:49 05/14/09 (0)
  • By cupping your ears... - MMasztal 17:40:53 05/08/09 (0)
  • As posted below - unclestu52 11:52:11 05/07/09 (0)
  • RE: Frustrated with uptapped potential - rick_m 09:55:37 04/25/09 (1)
    • RE: Frustrated with uptapped potential - benie 03:32:37 05/05/09 (0)
• Who knows about power capacitors. - Self-Inflicted 16:03:41 04/17/09 (4)
  • What do you mean by "poor" electricity? - The Real Dick Hertz 17:44:24 04/17/09 (3)
    • RE: What do you mean by "poor" electricity? - Self-Inflicted 19:49:06 04/17/09 (2)
      • But capacitors store DC - Tweekeng 19:56:55 04/20/09 (0)
      • RE: What do you mean by "poor" electricity? - Tre' 09:31:22 04/18/09 (0)
• ping: Cliff - The Real Dick Hertz 16:48:38 04/15/09 (4)
  • 'scope? - clifff 00:33:35 04/17/09 (3)
    • RE: 'scope? Nope. - The Real Dick Hertz 12:44:30 04/17/09 (2)
      • OK, got the schenmatic. - clifff 13:12:12 04/18/09 (1)
        • RE: OK, got the schenmatic. - The Real Dick Hertz 14:13:07 04/18/09 (0)
• If you can really really hear a difference between cable/wire - Frank Sol 22:04:14 04/14/09 (63)
  • RE: If you can really really hear a difference between cable/wire - olblueyez 10:07:28 01/01/10 (0)
  • RE: If you can really really hear a difference between cable/wire - shermanr@prw.net 13:00:38 11/12/09 (0)
  • Sometimes... - Bill Way 11:44:12 09/05/09 (0)
  • If you can not hear a difference - PhilJ 06:06:33 05/10/09 (0)
  • RE: If you can really really hear a difference between cable/wire - DrWho 19:22:47 04/23/09 (0)
  • RE: If you can really really hear a difference between cable/wire - Sostenuto 13:46:14 04/17/09 (0)
  • scoff if you like... - hifitommy 16:34:00 04/15/09 (0)
  • Is this an example of a never ending thread? NT - navman 11:16:30 04/15/09 (3)
    • Not any more, it isn't. - JimK 14:22:37 04/15/09 (1)
      • LOL. - navman 17:18:22 04/15/09 (0)
    • Indeed! Deja Vu all over again ad nauseum, etc...N/T - musetap 11:26:31 04/15/09 (0)
  • RE: If you can really really hear a difference between cable/wire - kennethcascio@aol.com 11:02:38 04/15/09 (0)
  • Move this thread? - Jim Smith 10:15:45 04/15/09 (5)
    • Yea it belongs in prop head. nt - Don Till 13:10:54 04/15/09 (0)
    • Usually silly trolls like this end up in PropHead these days...(nt) - mkuller 10:47:19 04/15/09 (0)
    • It's against Cable Asylum rules, so that's out of question. - carcass93 10:31:34 04/15/09 (1)
      • RE: What's wrong with it being here? - Jim Smith 10:47:09 04/15/09 (0)
    • Amen. (nt) - JimK 10:20:34 04/15/09 (0)
  • If you CAN'Treally hear a difference between cable/wire... - mkuller 10:09:22 04/15/09 (8)
    • RE: If you CAN'Treally hear a difference between cable/wire... - Don Till 14:20:24 04/15/09 (6)
      • Here's why... - mkuller 20:56:31 04/15/09 (3)
        • RE: Here's why... - Don Till 10:22:31 04/16/09 (2)
          • I suspect we won't agree... - mkuller 10:40:38 04/16/09 (1)
            • We should really attempt to agree - this isn't "difficult" stuff - Don Till 13:41:28 04/16/09 (0)
      • yer wrong. - hifitommy 16:33:01 04/15/09 (1)
        • If you put ihat way I agree with you - Don Till 09:24:49 04/16/09 (0)
    • and sometimes not so subtle nt - Frank E 10:42:32 04/15/09 (0)
  • If you can hear...then you have a system that is resolving enough to hear such differences (nt) - jfz 09:55:46 04/15/09 (2)
    • No! You have a system susceptable to cable differences - Don Till 13:17:30 04/15/09 (1)
      • RE: No! You have a system susceptable to cable differences - Curly Woods 04:07:29 11/05/09 (0)
  • ..... then I'd recommend dry dog food over Alpo. nt - tinear 09:12:47 04/15/09 (0)
  • In systems and sources and with cables and wires both cheap and expensive, changes made noticeable improvements - Bambi B 08:30:19 04/15/09 (0)
  • If You Can't Hear a Difference Between Cables... - Doug Schroeder 07:36:42 04/15/09 (1)
    • No joke. BTW, thank you for Van Alstine DAC review. - carcass93 07:53:30 04/15/09 (0)
  • RE: If you can really really hear a difference between cable/wire - AbeCollins 07:04:59 04/15/09 (18)
    • RE: If you can really really hear a difference between cable/wire - Don Till 14:13:59 04/15/09 (3)
      • Curious question - E-Stat 19:23:39 04/15/09 (2)
        • You've got real problem with your analogy - Don Till 10:37:30 04/16/09 (1)
          • Suit yourself - E-Stat 11:47:27 04/16/09 (0)
    • RE: If you can really really hear a difference between cable/wire - SgreenP@MSN.com 08:25:24 04/15/09 (2)
      • Exactly ... - reelsmith. 08:32:08 04/15/09 (1)
        • Exactly exactly exactly !! - AbeCollins 09:28:43 04/15/09 (0)
    • But at what point does it become "mega" and, accordingly, scam? - carcass93 07:28:45 04/15/09 (9)
      • Great question!! - AbeCollins 09:42:14 04/15/09 (2)
        • Of course. - carcass93 09:52:29 04/15/09 (1)
          • Why so defensive? - AbeCollins 10:57:52 04/15/09 (0)
      • RE: But at what point does it become "mega" and, accordingly, scam? - tesla 07:35:25 04/15/09 (5)
        • I thought there was understanding that cables are integral part of the system. - carcass93 07:47:03 04/15/09 (3)
          • Just curious... What is your system ? -nt - AbeCollins 11:43:57 04/15/09 (0)
          • RE: I thought there was understanding that cables are integral part of the system. - middleground 08:15:37 04/15/09 (1)
            • Question about your beliefs and biases - and your moniker. - carcass93 08:24:21 04/15/09 (0)
        • Seems to me the money was spent towards a better system ... - reelsmith. 07:40:03 04/15/09 (0)
    • RE: If you can really really hear a difference between cable/wire - Frank I 07:12:50 04/15/09 (0)
  • I would rephrase it like this: - carcass93 06:30:50 04/15/09 (1)
    • Not really - some wires are indistinquishable - Don Till 14:25:06 04/15/09 (0)
  • Just because I have good stuff doesn't mean I paid a lot.. n/t - reuben 06:17:36 04/15/09 (1)
    • RE: Just because I have good stuff doesn't mean I paid a lot.. n/t - middleground 08:16:55 04/15/09 (0)
  • It's a (bad) joke. Much better audio jokes out there. :0) [nt] - chris.redmond2@bushinternet.com 06:10:12 04/15/09 (0)
  • RE: If you can really really hear a difference between cable/wire - kerr 04:48:51 04/15/09 (1)
    • Yes, there are great differences in the resolutions of members' systems. - Norm 06:23:51 04/15/09 (0)
  • RE: If you can really really hear a difference between cable/wire - Todd Krieger 00:07:29 04/15/09 (2)
    • RE: You bet. - rick_m 06:48:38 04/15/09 (0)
    • NO - Frank Sol 00:26:53 04/15/09 (0)

Threads started on or before 12/31/04 are archived Here.
Threads started on or before 12/31/03 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2013, Audio Asylum, all rights reserved ] [ Take5 ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---