|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Practice PCB soldering posted by rneedle on January 23, 2007 at 04:52:57:
If you get to fine work such as surface mount, you will want a needle iron like Antex 15W mini soldering gun ANT-C/3U with
ANT-8G .012" gold needle tip and some thin gauge solder, such as 4% silver from Radio Shack. For peace of mind, find a good light source, such as magnifier with circular neon bulb on tractor arm as used for needle-point or fish fly tying. With a good needle tip mini-gun, SMD soldering is simpler than you might think.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- And for detail work... - Dave Garretson 10:42:47 01/24/07 (2)
- Re: And for detail work... - Lew 10:58:57 01/24/07 (1)
- Re: And for detail work... - Dave Garretson 14:40:48 01/24/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
