|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Pluto posted by Henry Pasternack on January 23, 2007 at 07:48:33:
Agreed 100%. You certainly don't need a $1000 NASA level workstation, but a decent investment now on a solid professional level tool such as this will:1/ last you for years and years and be good enough for all work you are every likely to want to do
2/ allow you to reach professional soldering quality after some practice.
Also, make sure you get good solder - something with a real brand name - in the USA "Kestor" is well known and professional, in the (past) English colonies try for the "Ersin Multicore" brand.
Even a master can't work well with cheapo tools and poor materials, and a beginner will have no success at all, and not be experienced enough to know it's not all his fault!
Regards, Allen
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- "like the Weller WTCPT (about $110)" - Allen Wright 07:20:21 01/24/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
