|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Practice PCB soldering posted by rneedle on January 23, 2007 at 04:52:57:
Pluto is a nice project. I would be pleased if you'd report your results back here once you are done.The board Linkwitz supplies is a quality, plated-through, solder-masked type. It should not require cleaning before soldering, or at most, you can wipe it down with a paper towel moistened with pure alcohol flux cleaner.
A bottle of flux cleaner is a good investment. You can use it to clean the flux residue off the board when you are finished soldering. It also makes a handy general-purpose degreaser and solvent (to be used sparingly because it is expensive).
What you really need is a good temperature controlled soldering like the Weller WTCPT (about $110). It is well worth the investment.
For solder practice, you should consider buying one or two Velleman kits. These simple kits, which run about $10-20 each, use the same high-quality PC board as the Pluto and can be assembled in about an hour. I recently taught my eight year-old son to solder using one of these.
-Henry
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Pluto - Henry Pasternack 09:05:35 01/23/07 (3)
- Sorry about the duplicate post - Henry Pasternack 09:06:18 01/23/07 (2)
- There is a delete option. - arend-jan 11:46:41 01/23/07 (1)
- Only if you're a registered user. (nt) - Henry Pasternack 11:55:00 01/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
