|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Ah, the neverending pursuit of low esr posted by rick_m on May 17, 2007 at 19:43:31:
Yes, although the resonances are the result of the energy storage and mechanical stresses. The higher the density, the more severe the problems. The hard case acts somewhat as a reflector to the mechanical waves. Most electrolytics can be improved a great deal with a high mass wrap such as lead or soft tin, affixed with a visco-elastic adhesive such as silicone, to help dissipate this electro-mechanical energy. Some of the high-rel electrolytics used to contain a tar-like substance to stabilize the plate assembly inside, and it acted to help dissipate mechanical and thermal energy as well. That coupled with much thicker and softer aluminum cases, and much thicker and softer aluminum plates. And copper leads instead of the steel mainly used now.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- electro-mechanical energy - Slider 20:50:43 05/17/07 (3)
- Re: electro-mechanical energy - rick_m 22:41:36 05/17/07 (2)
- Re: electro-mechanical energy - Slider 08:01:57 05/18/07 (1)
- Re: electro-mechanical energy - rick_m 09:57:46 05/18/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
