Tubes Asylum

Previous Page   View: Threads   eThreads   Sort: Date   Update   Unanswered   Last: Visit   24 Hours   48 Hours

Sponsored Links Welborne Labs - Tube gear, components and kits.

Free Classifieds Blue Circle BC21 - itsthemusic

• 6550 in prima luna - earnie3 19:17:22 03/15/07 (4)
  • Yep, I have 6550's in my PL 7 monoblocks. .. n/t - Brian_T 01:48:22 03/16/07 (2)
    • Re: Yep, I have 6550's in my PL 7 monoblocks. .. n/t - earnie3 10:33:38 03/17/07 (1)
      • Re: Yep, I have 6550's in my PL 7 monoblocks. .. n/t - Brian_T 01:01:20 03/21/07 (0)
  • I have in a 3/5 combo, FWIW - Chuck Y 19:46:03 03/15/07 (0)
• Stupid question about tube testers - izquierdaste@hotmail.com 15:23:37 03/15/07 (6)
  • Re: Stupid question about tube testers - Mechans 16:25:52 03/15/07 (5)
    • Re: Stupid question about tube testers - middleground 05:17:32 03/16/07 (0)
    • Re: Stupid question about tube testers - Steve O 16:58:17 03/15/07 (3)
      • Re: Stupid question about tube testers - Jim McShane 19:12:29 03/15/07 (2)
        • Re: Stupid question about tube testers - izquierdaste 20:07:00 03/15/07 (1)
          • But it is the best answer you can get - Russ57 16:11:55 03/16/07 (0)
• EL34 Longevity - jedinvest 15:15:43 03/15/07 (20)
  • Bad luck with EL-34's - nightdoggy 07:12:15 03/16/07 (0)
  • Also, how often to check bias? - jedinvest 15:27:25 03/15/07 (18)
    • Re: Also, how often to check bias? - Mechans 17:09:14 03/15/07 (1)
      • Thanks for the suggestions - jedinvest 08:20:35 03/17/07 (0)
    • Re: Also, how often to check bias? - tigweld 16:41:52 03/15/07 (15)
      • Running a Dynaco - Paully 14:28:17 03/16/07 (3)
        • We may be paranoid, but it doesn't mean the tubes aren't out to get us! - jedinvest 16:24:54 03/16/07 (2)
          • Problem is mine drifts enough - Paully 18:56:31 03/18/07 (0)
          • The worst thing is having an amp with a built in ammeter - nightdoggy 18:07:07 03/16/07 (0)
      • Bias! - Chris O 16:56:55 03/15/07 (10)
        • Re: Bias! - tigweld 17:37:28 03/15/07 (9)
          • Re: Bias! Delayed AB Onset - Chris O 04:41:34 03/16/07 (1)
            • Re: Bias! Delayed AB Onset - tigweld 09:18:56 03/16/07 (0)
          • EL34s should last longer ! - Interstage Tranny 18:40:40 03/15/07 (6)
            • Agreed! But do the other 'usual suspects' last any longer? - Ray Moth 16:39:24 03/16/07 (4)
              • New TS 6550 going on 2 years with no bias drift at all checked every 6 months. nt - risabet 18:10:28 03/16/07 (0)
              • I've had 5881s for over five years! - jedinvest 17:43:00 03/16/07 (2)
                • 5881 Longevity - nightdoggy 14:05:35 03/18/07 (0)
                • 5881s last long but are not usually sweet sounding - Interstage Tranny 18:22:39 03/16/07 (0)
            • Re: EL34s should last longer ! - eduardio 06:14:10 03/16/07 (0)
• 6H8C (6SN7GT)...what brand is this? - Kiefer74.1 14:28:35 03/15/07 (5)
  • Re: 6H8C (6SN7GT)...what brand is this? - Sondek 09:47:47 03/17/07 (0)
  • This what? (NT) - jeffreybehr 16:25:24 03/15/07 (3)
    • Input tubes on my pre-amp... - Kiefer74.1 20:09:07 03/15/07 (2)
      • It's kind of hard to say without a picture. - snert 20:53:41 03/15/07 (1)
        • Re: IOW notice the post immediately below. - Ron Oehlert 20:49:54 03/16/07 (0)
• Philips 6BQ5 same as Amperex 6BQ5/EL84? - Jon L 18:31:01 03/14/07 (4)
  • Re: Philips 6BQ5 same as Amperex 6BQ5/EL84? - Tom Bavis 07:53:27 03/15/07 (1)
    • Philips, Amperex, Minwatt, Mullard, Valvo EL84s - Interstage Tranny 18:53:52 03/15/07 (0)
  • Look here - realistico 20:02:04 03/14/07 (1)
    • Nice site, thanks......................nt - Barney's Beanery 04:48:46 03/15/07 (0)
• Westinghouse 6SN7's made in Japan?? - Alpha Al 17:37:14 03/14/07 (6)
  • Re: Westinghouse 6SN7's made in Japan?? - Ciscokid 20:17:19 03/14/07 (0)
  • Re: Westinghouse 6SN7's made in Japan?? - mnaka 19:55:20 03/14/07 (0)
  • Re: Westinghouse 6SN7's made in Japan?? - elektron 18:00:25 03/14/07 (3)
    • Re: Westinghouse 6SN7's made in Japan?? - Alpha Al 21:33:29 03/14/07 (0)
    • Re: I keep finding Raytheon tubes that were OEM Japanese - grinagog 20:05:30 03/14/07 (1)
      • Re: I keep finding Raytheon tubes that were OEM Japanese - Alpha Al 21:41:01 03/14/07 (0)
• Amp stands and how much or any power conditioning on tube power amps? - dave c 17:31:50 03/14/07 (14)
  • another vote for balanced power transformer - Quiet Earth 13:45:57 03/20/07 (0)
  • in 240 Volt land like US dahn here a separte circuit is best idea, THEN a 2kva isolating trannie - or 2 by 115 volt - Timbo in Oz 19:50:32 03/18/07 (1)
    • stands!!!???? MY amps are near the spkrs to keep wires short! - Timbo in Oz 20:07:48 03/18/07 (0)
  • Re: Amp stands and how much or any power conditioning on tube power amps? - middleground 05:35:27 03/16/07 (0)
  • Isolation a must. Power conditioner not too sure.. - adjieda 03:08:36 03/16/07 (0)
  • I use Target amp stands and surge suppression - nightdoggy 07:04:40 03/15/07 (0)
  • Re: Amp stands and how much or any power conditioning on tube power amps? - Shakey 05:27:33 03/15/07 (0)
  • This is what I did - If you want cheap solution - fin1bxn@msn.com 04:46:59 03/15/07 (1)
    • Re: This is what I did - If you want cheap solution - FrankC 11:53:36 03/15/07 (0)
  • On the topic of amp stand.... - FrankC 00:18:21 03/15/07 (3)
    • Re: On the topic of amp stand.... - middleground 05:39:04 03/16/07 (1)
      • Hey man, I didn't believe it either! - FrankC 10:49:53 03/16/07 (0)
    • Grand Prix Monaco amp stands - yep - triode 18:44:38 03/15/07 (0)
  • Re: Amp stands and how much or any power conditioning on tube power amps? - elektron 18:16:51 03/14/07 (0)
• Knight Stereo Preamp- Need Info/clues - MrThrash 16:17:27 03/14/07 (16)
  • The Main problem with Knight Stereo Preamp IMHO - grhughes 04:38:40 03/15/07 (0)
  • The mate to the knight KB85 amp - Michael Samra 21:48:20 03/14/07 (6)
    • Re: The mate to the knight KB85 amp...is contained within... - Steve O 16:41:59 03/15/07 (3)
      • Re: The mate to the knight KB85 amp...is contained within... - Michael Samra 01:56:01 03/16/07 (0)
      • Give the Man a Cigar! 83YC776 it is! - MrThrash 20:16:08 03/15/07 (1)
        • Re: Give the Man a Cigar! 83YX776 it is! Not YC... - Steve O 20:38:26 03/15/07 (0)
    • Re: The mate to the knight KB85 amp - MrThrash 21:51:18 03/14/07 (1)
      • Re: The mate to the knight KB85 amp - Michael Samra 19:53:51 03/15/07 (0)
  • Re: Knight Stereo Preamp- Need Info/clues - Tom Baavis 17:13:14 03/14/07 (7)
    • Re: Knight Stereo Preamp- Need Info/clues - Tom Bavis 17:55:56 03/14/07 (6)
      • OK, I've got clues.... - MrThrash 20:56:26 03/15/07 (0)
      • Knight Stereo Preamp w/12AY7 & 12AU7 tubes - Interstage Tranny 19:12:32 03/15/07 (1)
        • Great Tips - MrThrash 08:19:04 03/16/07 (0)
      • Close but No Cigar- Other possibilities - MrThrash 19:39:45 03/14/07 (2)
        • Re: Close but No Cigar- Other possibilities - MrThrash 20:04:45 03/14/07 (1)
          • Meant to Title Last Post:: I'm thinking 83YX776 (NT) - MrThrash 20:07:10 03/14/07 (0)
• help with this matter - Delbro 13:18:21 03/14/07 (3)
  • Re: help with this matter - corerosin 14:12:38 03/14/07 (2)
    • Re: help with this matter - Delbro 14:25:08 03/14/07 (1)
      • Re: help with this matter - Ron Oehlert 20:28:12 03/14/07 (0)
• Tube Tester Servicing - PRM 11:32:40 03/14/07 (2)
  • Re: Tube Tester Servicing - Michael Samra 02:04:30 03/16/07 (0)
  • You can - Ron Oehlert 18:44:09 03/14/07 (0)
• The much maligned 6L6 - nightdoggy 09:15:03 03/14/07 (16)
  • Re: The much maligned 6L6 - wopontour@hotmail.com 22:29:40 03/19/07 (0)
  • You KNOW IT MIKEY WANTS TO JOIN THIS CONVERSATION - Michael Samra 19:35:25 03/15/07 (2)
    • Re: You KNOW IT MIKEY WANTS TO JOIN THIS CONVERSATION - Steve O 20:58:29 03/15/07 (1)
      • Re: You KNOW IT MIKEY WANTS TO JOIN THIS CONVERSATION - Michael Samra 01:52:15 03/16/07 (0)
  • Re: The much maligned 6L6 - JANDG 18:25:34 03/15/07 (0)
  • Re: The much maligned 6L6 - Steve M. 17:35:23 03/15/07 (0)
  • Re: The much maligned 6L6 - Tom 13:54:00 03/15/07 (0)
  • Re: The much maligned 6L6 - msa 07:41:51 03/15/07 (0)
  • Re: The much maligned 6L6 - Anthony Dockrill 21:55:00 03/14/07 (0)
  • Re: The much maligned 6L6 - R Browne 19:46:12 03/14/07 (0)
  • I am not a big 6L6 fan - j rodney 15:23:25 03/14/07 (0)
  • Kinky - Chris O 12:19:49 03/14/07 (2)
    • Re: Actually, the 6L6 is a Kinkless Tetrode Too!... - Steve O 16:32:42 03/14/07 (1)
      • I'm a Victim of British Marketing - Chris O 06:00:33 03/15/07 (0)
  • Re: The much maligned 6L6 - elektron 11:17:34 03/14/07 (1)
    • Re: The much maligned 6L6 - Eli Duttman 17:03:41 03/14/07 (0)
• Hickox 539B 6550 Settings - Karma16 04:36:11 03/14/07 (3)
  • Re: Hickox 539B 6550 Settings - Karma16 04:46:53 03/20/07 (0)
  • Re: Hickok 539B 6550 Settings - arahl 12:39:40 03/19/07 (0)
  • Re: Hickox 539B 6550 Settings - John Chleapas 14:52:06 03/16/07 (0)
• Break-in of 12bh7 tube. - beppe61 02:56:21 03/14/07 (1)
  • Re: Break-in of 12bh7 tube. - beppe61 03:25:41 03/14/07 (0)
• Dyna 70 now dead after turning on with no input - benhen 18:27:56 03/13/07 (13)
  • Ok - pulled the rectifier tube - fuse held - slight hum from unit - benhen 07:24:23 03/15/07 (2)
    • Re: Ok - pulled the rectifier tube - fuse held - slight hum from unit - corerosin 07:42:45 03/15/07 (1)
      • Re: Ok - pulled the rectifier tube - fuse held - slight hum from unit - zacster 08:51:04 03/15/07 (0)
  • Re: Dyna 70 now dead after turning on with no input - corerosin 09:52:10 03/14/07 (2)
    • I was going to pull the rectifier next - but the fuse blew - benhen 10:31:13 03/14/07 (1)
      • Re: I was going to pull the rectifier next - but the fuse blew - corerosin 13:46:45 03/14/07 (0)
  • Re: Dyna 70 now dead after turning on with no input - beermanpete@socal.rr.com 22:23:41 03/13/07 (1)
    • Haven't put in the new fuse yet - - benhen 09:09:18 03/14/07 (0)
  • Unless your Dyna has been properly (fully) restored to an electrically safe state - Quest 20:39:41 03/13/07 (0)
  • Fuse is blown - is this normal? - benhen 18:37:46 03/13/07 (3)
    • Re: Fuse is blown - is this normal? - Door Nail 18:53:19 03/13/07 (2)
      • Re: Fuse is blown - is this normal? - BOONIERAT 06:40:03 03/14/07 (1)
        • It's supposed to be rebuilt already - - benhen 09:11:21 03/14/07 (0)
• Retubing TAD 1000 monoblocks with EL34's - old fatboy 18:27:53 03/13/07 (4)
  • Re: Retubing TAD 1000 monoblocks with EL34's - Mike_in_MD 19:41:01 03/13/07 (3)
    • Re: Retubing TAD 1000 monoblocks with EL34's - risabet 12:12:55 03/14/07 (2)
      • What order? - old fatboy 18:34:27 03/15/07 (1)
        • No! V1, V2, V3, and V4 are 6550s. . . - risabet 23:25:44 03/15/07 (0)
• Opinion of the Sylvania 6922 - haziz 18:18:42 03/13/07 (1)
  • Re: Opinion of the Sylvania 6922 - McCormack 08:56:30 03/14/07 (0)
• Opinions on Electroharmonix EL84 - haziz 18:09:16 03/13/07 (0)
• Fake Telefunkin's ? - guskund@yahoo.com 17:47:34 03/13/07 (2)
  • Re: Fake Telefunkin's ? - bassmandan 18:17:44 03/13/07 (1)
    • Re: Fake Telefunkin's ? - AlexK 13:08:36 03/14/07 (0)
• Tube rolling my VTA70 - fin1bxn@msn.com 16:23:09 03/13/07 (0)
• Replacement Tubes for Timster T-200 - Mudcat 11:12:26 03/13/07 (0)
• moth 2A3/45 amplifier noise - dmilojev@gmail.com 10:51:06 03/13/07 (2)
  • If you're referring to the Moth s45 then ... - Jack 05:57:44 03/15/07 (0)
  • Great question. I'm exploring various ways to quiet an AV-Trios/ASL845 combination. - jeffreybehr 11:23:49 03/13/07 (0)
• Amplifier speaker sinergy - Tigro 06:34:28 03/13/07 (0)
• 6GK5 suggestions - haziz 04:59:06 03/13/07 (10)
  • Re: 6GK5 suggestions - Steve M. 14:16:15 03/13/07 (1)
    • Re: 6GK5 suggestions - Poindexter 14:25:45 03/13/07 (0)
  • Re: 6GK5 suggestions - Poindexter 11:04:32 03/13/07 (0)
  • Hitachi - Dave Pogue 05:48:27 03/13/07 (6)
    • Wow, no kidding? - Poindexter 09:54:06 03/13/07 (5)
      • Re: Wow, no kidding? - davehanc 05:00:58 03/15/07 (1)
        • Report. - Poindexter 09:49:11 03/15/07 (0)
      • Re: Wow, no kidding? - Dave Pogue 10:10:48 03/13/07 (2)
        • Yah. - Poindexter 10:53:29 03/13/07 (1)
          • Quick update. - Poindexter 10:59:20 03/13/07 (0)
• Custom Power Transformer Link Exchange - rosepanic@gmail.com 23:57:59 03/12/07 (0)
• Tube tester - tnc 21:01:26 03/12/07 (1)
  • Made for Military by Hickock - grhughes 08:44:39 03/14/07 (0)
• Dynaco 70 transformer hum - bias? - benhen 19:30:49 03/12/07 (4)
  • Re: Dynaco 70 transformer hum - bias? - ojd 08:34:18 03/13/07 (0)
  • Re: Dynaco 70 transformer hum - bias? - ojd 03:56:26 03/13/07 (0)
  • Re: Dynaco 70 transformer hum - bias? - Michael Samra 22:14:24 03/12/07 (1)
    • I'll try that tonight - benhen 09:08:55 03/13/07 (0)
• Tube life - middleground 19:22:58 03/12/07 (2)
  • Re: Tube life - Chris O 06:32:53 03/13/07 (1)
    • Re: Tube life - middleground 08:09:29 03/13/07 (0)
• KT 77-E34L - scriabin 18:00:02 03/12/07 (2)
  • Yes, KT77's are direct replacements for EL34's - athanos 21:43:00 03/12/07 (1)
    • REALLY??? - Capt. Z 08:35:19 03/14/07 (0)
• What I thought to be a bad tube suddenly works & a couple ?s - nutbatter 16:39:52 03/12/07 (3)
  • Re: What I thought to be a bad tube suddenly works & a couple ?s - Tom Bavis 17:22:52 03/12/07 (1)
    • Re: What I thought to be a bad tube suddenly works & a couple ?s - Jim McShane 19:56:26 03/12/07 (0)
  • Re: What I thought to be a bad tube suddenly works & a couple ?s - astrostar59 16:48:38 03/12/07 (0)
• sherwood s-5000 and stacked advents - smileatthebus 16:32:50 03/12/07 (8)
  • Re: sherwood s-5000 and stacked advents - Tom Bavis 17:28:02 03/12/07 (7)
    • Re: sherwood s-5000 and stacked advents - smileatthebus 17:42:53 03/12/07 (6)
      • NO! - Ron Oehlert 22:24:46 03/12/07 (5)
        • Re: NO! - smileatthebus 06:52:57 03/13/07 (4)
          • Common - Ron Oehlert 13:33:05 03/13/07 (0)
          • Re: NO! - smileatthebus 06:59:21 03/13/07 (2)
            • O my Gosh - Ron Oehlert 13:50:24 03/13/07 (1)
              • Actually, the easiest thing to do would be.... - Nemo non 05:45:33 03/14/07 (0)
• You can now purchase tubes at your local grocery store. - wpod 13:55:28 03/12/07 (3)
  • If your system is VERY bright, these make great interconnects ! - Bambi B 09:09:21 03/14/07 (0)
  • Re: I've Tested Them. - benie 22:10:48 03/12/07 (0)
  • Re: You can now purchase tubes at your local grocery store. - krisjan 14:12:06 03/12/07 (0)
• GEC KT-88 vs. KT-88 Gold Lion tubes - tubers 12:48:45 03/12/07 (5)
  • Re: GEC KT-88 vs. KT-88 Gold Lion tubes - Michael Samra 13:36:49 03/12/07 (4)
    • Re: GEC KT-88 vs. KT-88 Gold Lion tubes - Tubers 13:58:05 03/12/07 (1)
      • Re: GEC KT-88 vs. KT-88 Gold Lion tubes - Michael Samra 21:54:27 03/14/07 (0)
    • "Mullard Osram" - you probably meant to say Marconi Osram (nt) - tubemonger 13:48:34 03/12/07 (1)
      • Re: "Mullard Osram" - you probably meant to say Marconi Osram (nt) - Michael Samra 21:55:29 03/14/07 (0)
• tube amp types - marvda1 09:13:07 03/12/07 (3)
  • Right here - Ron Oehlert 19:06:46 03/12/07 (0)
  • this MIGHT (!?) help... - mhardy6647 19:04:03 03/12/07 (0)
  • There are books..... - doodlebug 13:12:02 03/12/07 (0)
• your participation and thoughts requested on vintage tube gear I purchased - m8o 22:50:57 03/11/07 (0)
• Biasing Fisher amp - can anyone shed light on this? - PeterI 21:41:04 03/11/07 (10)
  • Re: Biasing Fisher amp - can anyone shed light on this? - Tom Bavis 13:27:24 03/12/07 (5)
    • Do I put that resistor in the circuit to ground? Did you mean 7591's? - PeterI 10:32:22 03/13/07 (3)
      • Re: Do I put that resistor in the circuit to ground? Did you mean 7591's? - Tom Bavis 11:25:29 03/13/07 (2)
        • Thanks again. - PeterI 14:35:24 03/13/07 (1)
          • Any suggestions about upgrading this amp welcome (nt) - PeterI 21:05:41 03/13/07 (0)
    • Thanks you ... - PeterI 20:07:58 03/12/07 (0)
  • Re: Biasing Fisher amp - can anyone shed light on this? - Michael Samra 03:22:20 03/12/07 (3)
    • I will try that. Thanks. nt - PeterI 21:13:08 03/12/07 (0)
    • Re: Biasing Fisher amp - can anyone shed light on this? - Nuke Em 04:42:24 03/12/07 (1)
      • Re: Biasing Fisher amp - can anyone shed light on this? - corerosin 10:47:50 03/12/07 (0)
• tube/bias adjustment problem? - coffeequeen 15:37:00 03/11/07 (3)
  • Re: tube/bias adjustment problem? - LR-dan 21:31:41 03/11/07 (0)
  • Re: tube/bias adjustment problem? - Catch22 18:30:43 03/11/07 (0)
  • See if it still happens - nightdoggy 17:03:12 03/11/07 (0)
• Vintage Tube Services - 3fd 09:19:05 03/11/07 (4)
  • Re: Vintage Tube Services - 3fd 16:01:10 03/11/07 (0)
  • Re: Vintage Tube Services - jcmusic 15:31:43 03/11/07 (0)
  • I spoke to Andy last week. - gliderguy 09:43:08 03/11/07 (1)
    • Re: I spoke to Andy last week. - 3fd 14:29:29 03/22/07 (0)
• 54 for me - RFGumby 05:37:14 03/11/07 (1)
  • Whoops-ignore- let me try that again - RFGumby 05:41:50 03/11/07 (0)
• Tubes - on or off? - w9ls 01:11:50 03/11/07 (22)
  • OFF......... - JANDG 19:44:40 03/11/07 (0)
  • Re: Tubes - on or off? - w9ls 19:40:14 03/11/07 (0)
  • Re: Tubes - on or off? - jea48 10:05:09 03/11/07 (1)
    • Re: Tubes - on or off? - Sherlock 08:04:00 03/12/07 (0)
  • If you're serious about leaving tubes on all the time.... - grhughes 07:27:12 03/11/07 (0)
  • Leave the pre on all th time - RFGumby 05:50:38 03/11/07 (16)
    • Re: Leave the pre on all th time - Jim McShane 10:29:26 03/11/07 (15)
      • I'd be remiss not to mention - RFGumby 17:25:45 03/15/07 (0)
      • small signal tubes? - Quiet Earth 21:01:58 03/11/07 (3)
        • Re: small signal tubes? - Jim McShane 06:29:32 03/12/07 (2)
          • Re: small signal tubes? - elflow 19:05:05 03/12/07 (0)
          • Thanks for that information Jim - Quiet Earth 10:48:16 03/12/07 (0)
      • I agree - Sherlock 16:07:04 03/11/07 (9)
        • Can't agree - RFGumby 17:16:58 03/11/07 (8)
          • Has anyone ever worn out a Telefunken ECC83/12AX7? - Dave Pogue 05:24:17 03/12/07 (5)
            • Re: Has anyone ever worn out a Telefunken ECC83/12AX7? - bonzodog 08:13:47 03/12/07 (0)
            • Re: Has anyone ever worn out a Telefunken ECC83/12AX7? - jea48 06:49:02 03/12/07 (1)
              • Re: Has anyone ever worn out a Telefunken ECC83/12AX7? - Dave Pogue 09:53:04 03/12/07 (0)
            • Re: Has anyone ever worn out a Telefunken ECC83/12AX7? - Jim McShane 06:23:06 03/12/07 (1)
              • Re: Has anyone ever worn out a Telefunken ECC83/12AX7? - Aleks 03:40:03 03/18/07 (0)
          • Re: Can't agree - Sherlock 18:43:12 03/11/07 (1)
            • Re: Can't agree - Jim McShane 06:34:05 03/12/07 (0)
• Qicksilver Mini MItes Momoblocks: who's using them and how do you like them? - dave c 21:21:31 03/10/07 (25)
  • Thanks and another question... - dave c 13:19:27 03/13/07 (0)
  • Re: Qicksilver Mini MItes Momoblocks: who's using them and how do you like them? - McCormack 15:57:31 03/11/07 (8)
    • FYI - nightdoggy 16:43:27 03/11/07 (7)
      • Maybe not.... - McCormack 10:53:43 03/12/07 (5)
        • Wow, thanks for telling me - nightdoggy 15:25:40 03/12/07 (4)
          • Re: Wow, thanks for telling me - McCormack 07:31:23 03/13/07 (3)
            • Yes - nightdoggy 08:14:57 03/13/07 (2)
              • Re: Yes - McCormack 12:19:36 03/13/07 (1)
                • I do too - nightdoggy 17:45:25 03/13/07 (0)
      • 3 cheers for the manufacturer as well - dave c 17:21:00 03/11/07 (0)
  • I have them Dave! - nightdoggy 09:23:57 03/11/07 (12)
    • Hey!! - dave c 14:07:31 03/11/07 (11)
      • And (Quicksilver Mini-Mites mono pair) - nightdoggy 14:26:05 03/11/07 (10)
        • Something is wrong - Frihed89 01:59:16 03/12/07 (1)
          • Yes but - nightdoggy 05:22:43 03/12/07 (0)
        • Although... - dave c 15:26:30 03/11/07 (7)
          • Smart Strategy - nightdoggy 16:56:36 03/11/07 (6)
            • I love it when a plan comes together - dave c 18:57:48 03/11/07 (5)
              • No cages for cats! - nightdoggy 05:25:22 03/12/07 (4)
                • Tear down the walls... cages - dave c 12:54:48 03/12/07 (3)
                  • Gangsta sprays in your house? - nightdoggy 15:28:04 03/12/07 (2)
                    • TC sprays everywhere - dave c 15:37:53 03/12/07 (1)
                      • Female Felines - nightdoggy 08:33:10 03/14/07 (0)
  • Re: Qicksilver Mini MItes Momoblocks: who's using them and how do you like them? - unclestu52 21:52:04 03/10/07 (1)
    • Re: Qicksilver Mini MItes Momoblocks: who's using them and how do you like them? - Peter 19:40:00 03/13/07 (0)
• Were DuMont EL-34s a non standard size? - DAT 20:07:58 03/10/07 (1)
  • It could be anything. - anumber1 20:17:53 03/10/07 (0)
• Where can I buy a plastic biasing screwdriver? - mtodde 16:09:34 03/10/07 (2)
  • Radioshack also sells an alignmemt kit. (nt) - Door Nail 19:06:16 03/10/07 (0)
  • Antique Electronic Supply - anumber1 18:22:38 03/10/07 (0)
• How many tubes total in your system??? - RFGumby 13:33:11 03/10/07 (61)
  • 2/8/4 - nightdoggy 18:18:25 03/18/07 (0)
  • 32 - 16 power tubes and 16 input tubes in my 2xMC2102's - Shane from AUS 04:18:03 03/16/07 (0)
  • Pre-amp 6; monoblocks 8+8; total=22 .... n/t - Brian_T 01:55:44 03/16/07 (0)
  • 24 in power + 10 in preamp = 34 - lrcordell 20:30:54 03/15/07 (0)
  • 2 by 7, plus 4, plus 12 =) 30 - Timbo in Oz 19:03:02 03/14/07 (1)
    • I forgot the 2 Magic eyes so that's 32! - Timbo in Oz 19:05:00 03/14/07 (0)
  • 7 - GLF 17:50:35 03/14/07 (2)
    • holy crap- you bought your own tubes? - RFGumby 15:20:26 03/15/07 (1)
      • Re: holy crap- you bought your own tubes? - GLF 10:27:47 03/17/07 (0)
  • Re: Nineteen; and I'd trade 'em all to be that age again! - grinagog 02:40:27 03/13/07 (0)
  • 17... - kstagger 11:10:39 03/12/07 (0)
  • 24 for me - desmondjim 10:17:56 03/12/07 (0)
  • 19, including rectifiers. - Larry I 06:50:32 03/12/07 (0)
  • 12 4xkt88, 4x12au7, 4x6922 nt - dpy 20:06:19 03/11/07 (0)
  • Just 10 for me--6 in preamp and 4 in 2 poweramps. (NT) - jeffreybehr 13:18:29 03/11/07 (0)
  • 54 for me - RFGumby 05:43:13 03/11/07 (2)
    • The valves in the Marantz 10B gave Door Nail a big jump - Metralla 10:38:44 03/11/07 (1)
      • Apologies - Metralla 18:26:04 03/11/07 (0)
  • 25 and looking for more! - benie 01:45:02 03/11/07 (0)
  • Re: How many tubes total in your system??? - tnewell 00:18:51 03/11/07 (0)
  • Re: How many tubes total in your system??? 44 - Audioquest4life 00:11:56 03/11/07 (0)
  • 10 - 2 in phono, 3 in preamp, 5 in power amp (these figures include 2 tube rectifiers) nt - Doug Flynn 23:35:17 03/10/07 (0)
  • How low can you go? - smart845 23:32:21 03/10/07 (1)
    • Five - Gerry E. 14:23:02 03/14/07 (0)
  • Counting rectifiers and meters I'm at 20 . . . - risabet 22:13:03 03/10/07 (0)
  • Fourteen in main rig - Cory M. 20:23:23 03/10/07 (0)
  • 13, 4 of them are rectifier tubes. This includes a phono pre - Tre' 19:20:12 03/10/07 (1)
    • also included is two channels of power amplification - Tre' 19:22:34 03/10/07 (0)
  • 60 (nt) - Door Nail 19:08:50 03/10/07 (6)
    • Whew! I'm glad someone has it worse (better?) than I - RFGumby 05:39:48 03/11/07 (5)
      • Miscounted it's 70 - Door Nail 06:11:38 03/11/07 (4)
        • Recount. Hanging chads! - Metralla 10:40:38 03/11/07 (3)
          • Re: Recount. Hanging chads! - Door Nail 12:13:23 03/11/07 (2)
            • Thanks - Metralla 18:23:37 03/11/07 (1)
              • Re: Thanks - Door Nail 19:06:44 03/11/07 (0)
  • Re: How many tubes total in your system??? - beermanpete@socal.rr.com 18:28:48 03/10/07 (0)
  • Lets see, 16 for the amp (Cary V12R) and .... - claud 18:00:03 03/10/07 (0)
  • 45 - arahl 17:39:39 03/10/07 (1)
    • Uncle - Metralla 18:35:38 03/10/07 (0)
  • Here are the real questions (not to hi-jack your thread or anything :-) - Dave Pogue 16:50:29 03/10/07 (6)
    • It's a sickness! - nightdoggy 19:04:45 03/18/07 (0)
    • I tend to be a bit of a packrat, so I have to be careful about keeping lots of stuff... - jeffreybehr 10:06:46 03/16/07 (0)
    • Re: Here are the real questions (not to hi-jack your thread or anything :-) - Tre' 19:40:04 03/10/07 (0)
    • Ha! Well, OK, about two dozen... They're for rolling, I swear! (nt) - grailer 19:18:36 03/10/07 (0)
    • I had to rent a storage unit to store all of my tubes. - thermionic addictions 18:51:05 03/10/07 (0)
    • Hijack away! - RFGumby 18:29:18 03/10/07 (0)
  • Sweet sixteen - Metralla 16:49:31 03/10/07 (0)
  • 22 - Mike B. 16:28:13 03/10/07 (0)
  • 16 - Cleantimestream 15:44:46 03/10/07 (0)
  • Re: How many tubes total in your system??? - tullman 15:40:58 03/10/07 (0)
  • 16 - andy evans 15:18:14 03/10/07 (0)
  • 30+tuner - Cpwill 14:36:17 03/10/07 (0)
  • lucky 13 - I just replaced all of em! - Maniac 14:04:41 03/10/07 (1)
    • Re: lucky 13 - I just replaced all of em! - GBLPS 14:13:49 03/10/07 (0)
  • A lowly 12... - grailer 13:40:59 03/10/07 (6)
    • Not bad for a year ! - RFGumby 13:49:03 03/10/07 (5)
      • Thanks! I thought that too about the Gallos - grailer 18:18:58 03/10/07 (0)
      • Twenty-One - Dave Pogue 14:07:14 03/10/07 (3)
        • Dave, what are those SET monos putting out? (nt) - grailer 19:17:24 03/10/07 (2)
          • Re: Dave, what are those SET monos putting out? (nt) - Dave Pogue 03:07:00 03/11/07 (1)
            • Thx - was wondering if you had a sand amp powering the second voice coil (nt) - grailer 17:08:46 03/11/07 (0)
• Mullard 10M 12ax7 Gold Pin - rmsretire 12:18:20 03/10/07 (0)
• Audio Research 6550 vs KT88 and tube brands - mbw817 10:41:04 03/10/07 (5)
  • Re: Audio Research 6550 vs KT88 and tube brands - tantra 11:12:05 03/12/07 (0)
  • Am I missing something??? - tnewell 21:50:57 03/11/07 (0)
  • Did you compare the -98 to the SC? - LR-dan 21:41:58 03/11/07 (0)
  • your kt88 experience is same as mine - Maniac 18:14:52 03/10/07 (0)
  • Have you tried the Tung-Sol 6550s? nt - Frank E 13:02:12 03/10/07 (0)
• Is the Electroharmonix EL84EH a modern Mullard? - haziz 09:57:50 03/10/07 (1)
  • I don't know - Quiet Earth 21:37:51 03/11/07 (0)
• 6GH8A Question - PRM 04:22:57 03/10/07 (5)
  • Thank you all ! - PRM 09:11:09 03/11/07 (0)
  • Re: 6GH8A Question - Bambi B 14:53:32 03/10/07 (0)
  • Re: 6GH8A Question - Michael Samra 09:47:33 03/10/07 (2)
    • Re: 6GH8A Question - BOONIERAT 16:41:03 03/11/07 (0)
    • Re: 6GH8A Question - PRM 09:56:56 03/10/07 (0)
• ARS Sonum Filarmonia - E34L tube replacement - bhoage 15:57:25 03/09/07 (1)
  • Sonum Filarmonia - E34L tube replacement good, KT77 better nt - -3db 20:56:43 03/09/07 (0)
• Tube codes for older Teslas - jcoe 15:50:39 03/09/07 (0)
• Fake Tesla KT88 in NOS looking boxes (rebranded Chinese) - tubemonger 14:35:03 03/09/07 (1)
  • Re: Fake Tesla KT88 in NOS looking boxes (rebranded Chinese) - EML 11:24:16 03/11/07 (0)
• Newbie tube question- Tube failure - www.records 06:41:07 03/09/07 (16)
  • Re: Newbie tube question- Tube failure - Cruz123 18:51:37 03/10/07 (0)
  • I guess I must live on the edge. - jea48 18:41:01 03/10/07 (0)
  • If I am going to be out of hearing range for longer than 1/2 hr or so i shut 'em off - anumber1 19:24:09 03/09/07 (4)
    • Thanks Al - www.records 21:32:21 03/09/07 (3)
      • Yay! Spring! - anumber1 13:59:17 03/10/07 (2)
        • I put the top down today - Dave Pogue 14:12:07 03/10/07 (1)
          • Re: I put the top down today - astrostar59 12:23:45 03/11/07 (0)
  • Thank you for the responses- - www.records 19:20:48 03/09/07 (0)
  • Re: Newbie tube question- Tube failure - groove 17:03:16 03/09/07 (0)
  • Would you.... - Russ57 11:57:12 03/09/07 (1)
    • I agree completely. . . - risabet 15:04:12 03/09/07 (0)
  • Re: Newbie tube question- Tube failure - lipmanl 08:04:26 03/09/07 (1)
    • Re: Newbie tube question- Tube failure - Larry I 11:39:57 03/09/07 (0)
  • By far. . . - Larry I 06:50:12 03/09/07 (2)
    • This is why I tend to live dangerously ... - Dave Pogue 06:09:46 03/10/07 (0)
    • Re: By far. . . - astrostar59 12:09:36 03/09/07 (0)
• WTB/WTT: Single 6900 Tube - Gerry E. 04:47:01 03/09/07 (0)
• RCA 6DL4/ECC88 tubes made in Germany - tubers 23:58:58 03/08/07 (2)
  • Not ECC88 but EC88 - bek 00:14:09 03/09/07 (1)
    • Re: Not ECC88 but EC88 - tubers 05:27:54 03/09/07 (0)
• What's better than an MX-110 under $1k with phono? - benhen 21:47:43 03/08/07 (6)
  • Re: What's better than an MX-110 under $1k with phono? - jcmjrt 08:52:08 03/09/07 (0)
  • Re: What's better than an MX-110 under $1k with phono? - Michael Samra 23:46:01 03/08/07 (4)
    • That's the sort of thing I'm looking for - what do you think of the IV? - benhen 08:21:20 03/09/07 (0)
    • Here is the preamp I was comparing it to - Michael Samra 23:53:02 03/08/07 (2)
      • Wower! That's mightly compelling..... - doodlebug 22:31:10 03/09/07 (1)
        • Re: Wower! That's mightly compelling..... - Jim McShane 14:09:51 03/10/07 (0)
• Tweed style tube amp kits - Fredrixx 17:49:43 03/08/07 (5)
  • Allen Amps - TWR 19:16:25 03/13/07 (0)
  • Tweed style tube amp kits - Fredrixx 21:18:13 03/09/07 (0)
  • Re: Tweed style tube amp kits - Mission Amps - Rob Mercure 15:42:37 03/09/07 (0)
  • Re: Tweed style tube amp kits - Chris O 04:45:00 03/09/07 (0)
  • Re: Tweed style tube .amp kits - Kim S. 03:34:48 03/09/07 (0)
• Shuguang 845B vs their 845M - warrenh@optonline.net 17:40:54 03/08/07 (2)
  • This should help - Sherlock 18:03:02 03/08/07 (1)
    • Re: This should help - Valvulator 05:30:23 03/11/07 (0)
• Replacing Int. Amp Tubes - One at a time or all at once? - Maniac 16:13:41 03/08/07 (2)
  • Re: Replacing Int. Amp Tubes - One at a time or all at once? - Ron Oehlert 19:41:47 03/08/07 (1)
    • Re: Replacing Int. Amp Tubes - One at a time or all at once? - Tre' 20:57:37 03/08/07 (0)
• Cayin 860 Mono Amps ? - Kenreau 15:59:58 03/08/07 (0)
• Tubestore.com is pretty damned good! - Maniac 12:31:23 03/08/07 (5)
  • Re: Tubestore.com is pretty damned good! - Dman 17:41:21 03/09/07 (0)
  • Yes they are! So is Boiaudioworks.com and Tubedepot.com... - Thermionic Dude 12:49:29 03/09/07 (0)
  • Good to know - Quiet Earth 08:38:01 03/09/07 (0)
  • Re: Tubestore.com is pretty damned good! - REL54 14:54:02 03/08/07 (0)
  • Seconded. - Bas Horneman 12:41:00 03/08/07 (0)
• SuperTNT Tubes - ronw 09:48:36 03/08/07 (0)
• Tubes suggestions for AES PH-1 Phonostage - GOS 03:36:11 03/08/07 (1)
  • Re: Tubes suggestions for AES PH-1 Phonostage - Tre' 10:10:37 03/08/07 (0)
• socket on rear of fisher 500B - thermionic emitter 22:06:33 03/07/07 (2)
  • Re: socket on rear of fisher 500B - corerosin 22:36:51 03/07/07 (1)
    • Re: socket on rear of fisher 500B - thermionic emitter 07:17:53 03/08/07 (0)
• aren't kt88, el34 and 6ca7 interchangeable? thank you (nt) - jarthel 18:45:46 03/07/07 (4)
  • The basic base layout is shared. - anumber1 14:15:54 03/08/07 (0)
  • No, not always. (nt) - Quest 19:35:14 03/07/07 (0)
  • Re: aren't kt88, el34 and 6ca7 interchangeable? thank you (nt) - risabet 19:05:30 03/07/07 (1)
    • Re: aren't kt88, el34 and 6ca7 interchangeable? thank you (nt) - Ray Moth 00:36:29 03/08/07 (0)
• Bendix 6889; changing the pin-out with a socket adaptor ( ? ) - grinagog 17:17:54 03/07/07 (8)
  • Re: Bendix 6889; changing the pin-out with a socket adaptor ( ? ) - Rob Mercure 18:10:32 03/07/07 (7)
    • Re: Thanks Rob, "limited role in audio" seems to have more to do - grinagog 21:49:55 03/08/07 (2)
      • Re: Thanks Rob, "limited role in audio" seems to have more to do - Rob Mercure 01:54:25 03/09/07 (1)
        • Rob; great explanation! - grinagog 03:16:31 03/09/07 (0)
    • Re: Bendix 6889; changing the pin-out with a socket adaptor ( ? ) - akanalog@yahoo.com 19:41:03 03/07/07 (3)
      • Re: akanalog; where did you get your design idea from? - grinagog 22:50:46 03/07/07 (2)
        • Re: akanalog; where did you get your design idea from? - akanalog@yahoo.com 22:27:55 03/08/07 (1)
          • Re: Thanks for the link to the schematic; by coincidence - grinagog 20:25:38 03/09/07 (0)
• has anyone heard distortionby the lack of the screen in a 6FQ7... - jarthel 14:38:41 03/07/07 (6)
  • Re: has anyone heard distortionby the lack of the screen in a 6FQ7... - tvr2500m 09:14:54 03/08/07 (0)
  • Re: has anyone heard distortionby the lack of the screen in a 6FQ7... - Alpha Al 20:09:45 03/07/07 (0)
  • The 6SN7, 6CG7, and 6FQ7... - Bambi B 18:23:07 03/07/07 (2)
    • Re: GE JAN 6CG7's I have; identical except one type - grinagog 19:04:30 03/07/07 (1)
      • Tubes with shields - Bambi B 20:54:24 03/07/07 (0)
  • Re: has anyone heard distortionby the lack of the screen in a 6FQ7... - Len_ 15:56:12 03/07/07 (0)
• ASL MG SI 15 DT - Jerry M 13:41:26 03/07/07 (6)
  • Here's another option... - Tom 10:08:40 03/09/07 (2)
    • Re: Here's another option... - Jerry M 04:23:46 03/12/07 (1)
      • Yes, but - Tom 08:04:45 03/12/07 (0)
  • Re: ASL MG SI 15 DT - Aldovan 16:13:25 03/07/07 (1)
    • Re: ASL MG SI 15 DT - Jerry M 04:59:41 03/08/07 (0)
  • Re: ASL MG SI 15 DT - JoKath 13:55:08 03/07/07 (0)
• 12au7 for Synthesis Nimis - new gold dream 12:39:16 03/07/07 (4)
  • Re: 12au7 for Synthesis Nimis - groove 19:42:44 03/08/07 (0)
  • Re: 12au7 for Synthesis Nimis - shosty5 16:55:51 03/07/07 (2)
    • Re: 12au7 for Synthesis Nimis - new gold dream 12:46:41 03/08/07 (1)
      • Re: 12au7 for Synthesis Nimis - shosty5 12:55:19 03/08/07 (0)
• KT-77 Mini Nuke - nightdoggy 08:17:53 03/07/07 (2)
  • No problem except.. - Msquared 15:45:03 03/07/07 (1)
    • I thought of that - nightdoggy 17:48:58 03/07/07 (0)
• KT66 , 6CA7 - b.ben 00:15:45 03/07/07 (10)
  • Re: KT66 , 6CA7 - benie 01:35:44 03/10/07 (0)
  • Re: KT66 , 6CA7 - Michael O 06:57:18 03/09/07 (0)
  • Re: EH 6CA7 Fat Bottle - groove 19:50:38 03/08/07 (0)
  • Re: KT66 , 6CA7 - McCormack 08:35:06 03/07/07 (1)
    • Re: KT66 , 6CA7 - b.ben 09:04:39 03/07/07 (0)
  • Re: KT66 , 6CA7 - Michael Samra 02:51:56 03/07/07 (2)
    • Re: KT66 , 6CA7 - b.ben 04:57:04 03/07/07 (1)
      • Re: KT66 , 6CA7 - Michael Samra 13:46:11 03/07/07 (0)
  • Re: KT66 , 6CA7 - Mechans 02:02:24 03/07/07 (1)
    • Re: KT66 , 6CA7 - b.ben 02:36:30 03/07/07 (0)
• raising/lowering bias to adjust volume...? - Kiefer74.1 23:00:13 03/06/07 (4)
  • What you need to do - Russ57 06:43:20 03/07/07 (1)
    • Re: What you need to do - Kiefer74.1 21:00:05 03/08/07 (0)
  • Re: raising/lowering bias to adjust volume...? - corerosin 04:18:04 03/07/07 (1)
    • Love the grandma's car analogy ;-) - Kiefer74.1 20:51:33 03/08/07 (0)
• noisy driver tubes in my Welborne Laurel 300Bs - LousyTourist 19:06:48 03/06/07 (2)
  • 'ultimate driver?' The choke coupled Mu Stage - ben 23:34:17 03/06/07 (0)
  • driver tubes for Welborne Laurel 300Bs - Metralla 21:08:16 03/06/07 (0)
• Siemens CCa - sherod 17:54:25 03/06/07 (15)
  • Re: Siemens CCa - tango4@telia.com 10:16:09 03/07/07 (3)
    • Re: Siemens CCa - bonzodog 15:54:43 03/07/07 (2)
      • Re: Siemens CCa - tango4@telia.com 09:38:44 03/08/07 (1)
        • Re: Siemens CCa - FrankC 14:17:35 03/08/07 (0)
  • Re: Siemens CCa - clkyu 07:32:04 03/07/07 (1)
    • Re: Siemens CCa - Len_ 08:24:10 03/07/07 (0)
  • Re: Siemens CCa - edisonwu 01:37:49 03/07/07 (0)
  • Re: Siemens CCa - sherod 20:35:25 03/06/07 (3)
    • Re: Siemens CCa-special ones - mspc 14:40:02 03/08/07 (0)
    • Re: Siemens CCa - Len_ 22:56:53 03/06/07 (1)
      • Re: Siemens CCa / Mullard / Ediswan CV5358 - guest 03:19:27 03/15/07 (0)
  • How much are you prepared to spend for them? nt - wgallupe 19:08:47 03/06/07 (1)
    • Re: How much are you prepared to spend for them? nt - sherod 19:11:50 03/06/07 (0)
  • i think the bigger problem is acquiring a Cca... - jarthel 18:59:34 03/06/07 (1)
    • Re: i think the bigger problem is acquiring a Cca... - sherod 19:13:22 03/06/07 (0)
• Speaker Connections to Stereo Amp Run in Mono - tvr2500m 17:00:30 03/06/07 (0)
• Tube Rolling in The 500C - kukakunga 11:42:30 03/06/07 (4)
  • Re: Tube Rolling in The 500C - sgmlaw 08:24:35 03/07/07 (0)
  • Re: Tube Rolling in The 500C - Eli Duttman 17:12:43 03/06/07 (2)
    • Re: Tube Rolling in The 500C - kukakunga 19:03:08 03/06/07 (1)
      • Pre-amp section recipe... - mpathus 20:58:54 03/07/07 (0)
• What do ya think - more tubes a warmer sound? - Aster 09:33:16 03/06/07 (2)
  • Warmer room... for sure. (nt) - Victor Khomenko 11:43:17 03/06/07 (0)
  • Re: What do ya think - more tubes a warmer sound? - Tre' 10:09:09 03/06/07 (0)
• Amperex 7062 Pinched Waist - Frihed89 02:43:37 03/06/07 (1)
  • Re: Amperex 7062 Pinched Waist - Tom Bavis 05:44:11 03/06/07 (0)
• Opinion on this EZ80 valve - quantran@fpt.vn 22:17:46 03/05/07 (2)
  • Re: Opinion on this EZ80 valve - lovetube 05:22:48 03/06/07 (1)
    • Re: Opinion on this EZ80 valve - corerosin 07:24:10 03/06/07 (0)
• Which 519 ? - Aleks 22:05:35 03/05/07 (9)
  • Re: Which 519 ? - coolhand 04:01:01 03/06/07 (8)
    • Re: Which 519 ? - Aleks 16:10:29 03/06/07 (7)
      • Re: Which 519 ? - coolhand 17:45:26 03/06/07 (6)
        • Re: Which 519 ? - Aleks 20:46:53 03/06/07 (0)
        • Re: Which 519 ? - Aleks 20:36:34 03/06/07 (4)
          • Re: Which 519 ? - coolhand 16:48:19 03/07/07 (3)
            • Re: Which 519 ? - Aleks 17:53:00 03/07/07 (2)
              • Re: Which 519 ? - coolhand 18:09:46 03/07/07 (1)
                • Re: Which 519 ? - Aleks 11:10:24 03/11/07 (0)
• ARC SP8 P.S. caps fried - pepproo 18:27:05 03/05/07 (11)
  • Re: ARC SP8 P.S. caps fried - MJL 17:16:03 03/07/07 (0)
  • Re: ARC SP8 P.S. caps fried - AJ 10:37:25 03/06/07 (4)
    • Re: ARC SP8 P.S. caps fried - MJL 17:06:44 03/07/07 (0)
    • Re: ARC SP8 P.S. caps fried - pepproo 19:12:31 03/06/07 (2)
      • Re: ARC SP8 P.S. caps fried - AJ 19:26:11 03/06/07 (1)
        • Re: ARC SP8 P.S. caps fried - pepproo 19:56:43 03/06/07 (0)
  • If its 20+ years old.... - doodlebug 22:08:56 03/05/07 (4)
    • I'm still running a Quicksilver MS-190 - sgb 05:55:00 03/06/07 (3)
      • Re: I'm still running a Quicksilver MS-190 - Cleantimestream 15:08:18 03/06/07 (0)
      • The answer lies in... - anumber1 08:28:04 03/06/07 (1)
        • Re: The answer lies in... - gkargreen 12:33:50 03/06/07 (0)
• Mullard 5AR4's tested on a Hickok 6000A Question - MLang 16:28:08 03/05/07 (3)
  • Rectifiers are tested with a simple emisions test - anumber1 08:30:07 03/06/07 (0)
  • Re: Mullard 5AR4's tested on a Hickok 6000A Question - TUBOS 17:09:25 03/05/07 (1)
    • Re: Mullard 5AR4's tested on a Hickok 6000A Question - MLang 17:32:44 03/05/07 (0)
• KT-88 Testing specs - BOONIERAT 14:27:23 03/05/07 (1)
  • Re: KT-88 Testing specs - bonzodog 08:24:56 03/06/07 (0)
• VTV Ultrasonic Line Stage - xdac 12:18:26 03/05/07 (0)
• Gold Lion Reissue - one last thing! - dls123 11:11:45 03/05/07 (2)
  • who is this sponsor? - jarthel 19:02:09 03/06/07 (1)
    • Re: who is this sponsor? - dls123 21:52:28 03/06/07 (0)
• B&K 700 question - earth99@telus.net 09:49:19 03/05/07 (4)
  • Re: B&K 700 question - edh 22:03:04 03/06/07 (0)
  • Could be... - lipmanl 06:10:52 03/06/07 (2)
    • Re: Could be... - earth99@telus.net 12:28:09 03/06/07 (1)
      • Re: Could be... - Mr. Droopy-Drawers 17:54:36 03/06/07 (0)
• Sylvania 6SN7GT VT-231 Vivid? Detailed? - Rich Maurin 07:29:16 03/05/07 (10)
  • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - mingus 14:07:44 03/05/07 (0)
  • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Len_ 08:08:53 03/05/07 (8)
    • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Rich Maurin 08:54:47 03/05/07 (7)
      • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Sherlock 15:12:34 03/05/07 (2)
        • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Rich Maurin 16:48:31 03/05/07 (1)
          • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Sherlock 18:37:00 03/05/07 (0)
      • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - jb0194 11:05:13 03/05/07 (0)
      • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Len_ 09:25:26 03/05/07 (2)
        • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Frihed89 13:44:09 03/05/07 (1)
          • Re: Sylvania 6SN7GT VT-231 Vivid? Detailed? - Len_ 14:14:32 03/05/07 (0)
• Buy Grungey tubes...sell clean tubes - gortnipper 22:34:26 03/04/07 (5)
  • try Ronsonal (naphtha) - nsgarch 21:14:43 04/05/07 (0)
  • Re: Buy Grungey tubes...sell clean tubes - anumber1 08:34:02 03/06/07 (0)
  • If these tubes are in demand - Frihed89 06:58:17 03/05/07 (0)
  • Re: Buy Grungey tubes...sell clean tubes - corerosin 03:31:06 03/05/07 (1)
    • Acetone, Windex, Rubbing Alcohol on a rag - Alpha Al 05:30:35 03/05/07 (0)
• musical fidelity x-10 - can anybody explain to an electronics novice what this thing does? - hukkfinn 18:03:18 03/04/07 (5)
  • It amplifies 1db, and makes an easier load on the upstream component... - Balle Clorin 04:32:08 03/06/07 (0)
  • Re: musical fidelity x-10 - can anybody explain to an electronics novice what this thing does? - SCBailey 15:32:01 03/05/07 (0)
  • Re: musical fidelity x-10 - can anybody explain to an electronics novice what this thing does? - jb0194 13:18:24 03/05/07 (0)
  • The *least* it can do is add something to the signal, so... - Nemo Non 09:49:09 03/05/07 (0)
  • IMHO - Russ57 07:34:26 03/05/07 (0)
• Gotta love the visuals on this Siemens 12AU7 auction - gortnipper 17:40:37 03/04/07 (3)
  • Nice to see some creativity! * - PureAudio 18:04:12 03/04/07 (2)
    • Re: Nice to see some creativity! * - TUBOS 17:14:10 03/05/07 (1)
      • Yes, but are they matched? *nt* - ElbowGeek 00:02:30 03/07/07 (0)
• Another visit to Herbies Audio Lab - hartwerger 17:38:49 03/04/07 (3)
  • Does the brand matter? - amdan 01:20:35 03/06/07 (2)
    • Herbies work a little differently. . . - risabet 12:32:14 03/06/07 (0)
    • Re: Does the brand matter? - hartwerger 10:45:49 03/06/07 (0)
• Some questions on the I-177-B tube tester - birt 14:46:30 03/04/07 (0)
• Siemans 6BQ5? - JSW2K 14:00:47 03/04/07 (2)
  • Re: Siemans 6BQ5? - Ron Oehlert 22:57:48 03/04/07 (0)
  • Re: Siemans 6BQ5? - birt 14:59:50 03/04/07 (0)
• output caps in Consonance tubed cd player - dls123 12:29:26 03/04/07 (0)
• Anyone ever herd of FSG EL34's - fin1bxn@msn.com 11:29:28 03/04/07 (0)
• st70 bottom plate - hifitommy 07:57:35 03/04/07 (2)
  • Uncle Ned at Triode has them!! See Link - groove 20:02:41 03/08/07 (0)
  • Re: st70 bottom plate - ojd 08:32:02 03/04/07 (0)
• Balance - Lowrider 05:55:18 03/04/07 (6)
  • Thanks, but... - Lowrider 22:20:54 03/04/07 (0)
  • Re: Balance - Ron Oehlert 10:38:54 03/04/07 (0)
  • My first suggestion would also be to look at speaker placement ... - PureAudio 09:59:02 03/04/07 (0)
  • Has it always been so, or did it just start......... - Chuck Y 07:57:51 03/04/07 (1)
    • It wouldn't be the first case of poor volume control tracking - Ray Moth 00:08:03 03/06/07 (0)
  • Re: Balance - ontrack2@gmail.com 07:20:20 03/04/07 (0)
• Does Hickok 600A test 6550's? (NT) - winstoncheng888@hotmail.com 17:15:03 03/03/07 (1)
  • Re: Does Hickok 600A test 6550's? (NT) - dls123 17:42:05 03/03/07 (0)
• Caa-5751 - tz7 07:16:35 03/03/07 (2)
  • Re: Caa-5751 - tvr2500m 09:26:17 03/06/07 (0)
  • Re: Caa-5751 - kukakunga 11:15:59 03/04/07 (0)
• EL34G questions for tube experts - nightdoggy 05:34:01 03/03/07 (3)
  • Re: EL34G questions for tube experts - Hogio 04:42:10 03/05/07 (0)
  • Re: EL34G questions for tube experts - Nuke Em 04:03:02 03/05/07 (1)
    • Re: EL34G questions for tube experts - nightdoggy 04:28:11 03/06/07 (0)
• EH KT88 from Canadian source - Audiopath49 01:15:01 03/03/07 (10)
  • Another Canadian source - Feanor 16:28:55 03/06/07 (0)
  • Re: EH KT88 from Canadian source - Jim McShane 10:18:43 03/03/07 (5)
    • A caution here - Feanor 16:27:12 03/06/07 (0)
    • Re: EH KT88 from Canadian source - Audiopath49 18:24:27 03/03/07 (3)
      • Confirming Eli's comments.... - doodlebug 08:50:19 03/04/07 (0)
      • Re: EH KT88 from Canadian source - Eli Duttman 19:09:13 03/03/07 (1)
        • Thanks again - Audiopath49 17:44:19 03/04/07 (0)
  • Re: EH KT88 from Canadian source - AJ 04:47:57 03/03/07 (2)
    • Thanks :-) - Audiopath49 18:26:19 03/03/07 (0)
    • Re: EH KT88 from Canadian source - JoKath 18:23:29 03/03/07 (0)
• Report on Gold Lion KT88 reissues.... - dls123 22:53:30 03/02/07 (25)
  • Re: Report on Gold Lion KT88 reissues.... - georgemg 10:48:17 03/24/07 (0)
  • Re: Report on Gold Lion KT88 reissues.... - Cruz123 13:25:11 03/04/07 (1)
    • Re: Report on Gold Lion KT88 reissues.... - dls123 16:53:23 03/04/07 (0)
  • Re: Report on Gold Lion KT88 reissues.... - benie 21:59:22 03/03/07 (4)
    • Re: Report on Gold Lion KT88 reissues.... - dls123 07:22:32 03/04/07 (3)
      • Re: Report on Gold Lion KT88 reissues.... - benie 15:12:46 03/04/07 (2)
        • Re: Report on Gold Lion KT88 reissues.... - dls123 16:59:49 03/04/07 (1)
          • Sounds like a good plan - benie 21:09:15 03/04/07 (0)
  • Re: Report on Gold Lion KT88 reissues.... - McCormack 06:19:16 03/03/07 (3)
    • Re: Report on Gold Lion KT88 reissues.... - dls123 06:53:34 03/03/07 (2)
      • Re: Report on Gold Lion KT88 reissues.... - gortnipper 21:51:23 03/03/07 (1)
        • Re: Report on Gold Lion KT88 reissues.... - McCormack 22:31:07 03/03/07 (0)
  • Re: Report on Gold Lion KT88 reissues.... - georgemg 00:57:34 03/03/07 (0)
  • Re: Report on Gold Lion KT88 reissues.... - Michael Samra 23:24:05 03/02/07 (11)
    • Re: Report on Gold Lion KT88 reissues.... - McCormack 22:14:25 03/03/07 (2)
      • Re: Report on Gold Lion KT88 reissues.... - Michael Samra 00:12:11 03/04/07 (1)
        • Re: Report on Gold Lion KT88 reissues.... - dls123 07:04:47 03/04/07 (0)
    • Another thing about penta. - Michael Samra 22:10:44 03/03/07 (0)
    • Spending a minute on the fone ordering tubes is kissing someone's fanny? If so, you must... - jeffreybehr 10:11:32 03/03/07 (1)
      • Re: NO!!! Its just that they were out of them for a long time. - Michael Samra 11:42:10 03/03/07 (0)
    • Re: Report on Gold Lion KT88 reissues.... - dls123 06:50:47 03/03/07 (4)
      • Re: Report on Gold Lion KT88 reissues.... - mbw817 10:16:40 03/10/07 (0)
      • Re: Report on Gold Lion KT88 reissues.... - Michael Samra 22:15:07 03/03/07 (2)
        • Re: Report on Gold Lion KT88 reissues.... - dls123 07:08:52 03/04/07 (1)
          • Re: Report on Gold Lion KT88 reissues.... - Michael Samra 13:34:35 03/04/07 (0)
• TELEFunken 803S ? - bernard991 21:01:31 03/02/07 (7)
  • Re: TELEFunken 803S ? - Alnicoman 05:07:11 03/03/07 (0)
  • Re: TELEFunken 803S ? - Len_ 02:19:25 03/03/07 (5)
    • Re: TELEFunken 803S ? - bernard991 04:22:54 03/03/07 (4)
      • Telefunken ecc803s review and comparison - mdjukic99@yahoo.com 17:37:53 03/03/07 (3)
        • Re: Telefunken ecc803s review and comparison - Len_ 20:48:37 03/03/07 (2)
          • How would the Siemens E83CC compare? (nt) - gortnipper 17:32:22 03/04/07 (1)
            • Re: How would the Siemens E83CC compare? (nt) - Len_ 07:45:03 03/05/07 (0)
• Advice On Good Output Tube Sockets Needed - Maxxwire 20:46:36 03/02/07 (1)
  • I'd suggest you.... - doodlebug 22:44:53 03/02/07 (0)
• Tube life in CD player - shpickering@yahoo.ca 20:22:09 03/02/07 (2)
  • Re: Tube life in CD player - Ron Oehlert 12:30:58 03/03/07 (1)
    • Re: Tube life in CD player - astrostar59 15:00:03 03/03/07 (0)
• Michael Samra - transamz 19:01:31 03/02/07 (0)
• Need assistance selecting power transformer for project - InProcess 17:07:00 03/02/07 (3)
  • what you need to do is - REL54 20:07:24 03/02/07 (2)
    • Agree with Ron.... - doodlebug 20:33:20 03/02/07 (1)
      • A little more help (link) - HOK 05:08:33 03/03/07 (0)
• Half of 300B Filiment Burning - Sidewinder 15:06:44 03/02/07 (0)
• hickok 539b manual - pennyford 07:52:43 03/02/07 (2)
  • Re: hickok 539b manual - Ron Oehlert 15:44:54 03/02/07 (0)
  • Re: hickok 539b manual - ekimetsok 13:29:25 03/02/07 (0)
• Who manufactures Ayon tubes? - johngot 00:27:29 03/02/07 (7)
  • I do not belive those specs... 0,1% distortion... - Balle Clorin 04:43:14 03/06/07 (1)
    • a review - Balle Clorin 04:56:18 03/06/07 (0)
  • Re: Who manufactures Ayon tubes? - Joao 22:47:34 03/02/07 (0)
  • Re: Who manufactures Ayon tubes? - Ed Sawyer 14:38:24 03/02/07 (1)
    • Re: "short-lived EAT tubes." - Ivan303 14:55:49 03/02/07 (0)
  • Ayon tube factory pics... - waldenpuddle 10:09:52 03/02/07 (0)
  • They claim to do so themselves. - Nemo Non 06:46:23 03/02/07 (0)
• Fake Tesla ECC803S now showing up in Japan Yahoo Auctions - any Japanese users here?? - tubemonger 18:16:25 03/01/07 (0)
• Installed VTA board in my ST70 - fin1bxn@msn.com 17:41:43 03/01/07 (12)
  • "...one of my tubes I have to wiggle to get a good connection" - Chris O 04:41:19 03/02/07 (1)
    • Re: "...one of my tubes I have to wiggle to get a good connection" - Jim McShane 13:13:29 03/03/07 (0)
  • Re: Installed VTA board in my ST70 - Michael Samra 22:26:43 03/01/07 (9)
    • What is wrong with Auricaps? - Paully 18:04:33 03/02/07 (8)
      • Re: What is wrong with Auricaps? - Michael Samra 01:24:20 03/03/07 (7)
        • Re: What is wrong with Auricaps? - Jim McShane 10:23:11 03/03/07 (6)
          • Re: What is wrong with Auricaps? - Michael Samra 11:44:11 03/03/07 (5)
            • Re: What is wrong with Auricaps? - Jim McShane 12:40:29 03/03/07 (4)
              • Re: What is wrong with Auricaps? - No Way 18:44:21 03/04/07 (0)
              • application - elektron 14:01:09 03/03/07 (2)
                • Re: application - Steve O 17:34:35 03/03/07 (1)
                  • Re: application - Michael Samra 22:04:22 03/03/07 (0)
• Sylvania 5881's - jimmynich 16:13:05 03/01/07 (1)
  • Re: Sylvania 5881's - Rob Mercure 14:28:22 03/02/07 (0)
• question for Joe S - bernard991 12:52:45 03/01/07 (7)
  • Re: question for Joe S - Joe S 22:22:28 03/17/07 (0)
  • Try sending him an email. Let us know your results..* - jea48 12:48:50 03/02/07 (0)
  • Re: question for Joe S - bernard991 20:03:54 03/01/07 (4)
    • Re: question for Joe S - bernard991 20:57:27 03/02/07 (1)
      • Re: question for Joe S - jea48 05:46:56 03/03/07 (0)
    • Re: question for Joe S - posbwp55@msn.com 15:39:37 03/02/07 (0)
    • Last post December 30th, 2005 - grailer 04:09:58 03/02/07 (0)
• testing 6550 C on a hickok 6000 - unclewatts 00:04:45 03/01/07 (4)
  • Re: testing 6550 C on a hickok 6000 - SirAnthony 02:15:19 03/01/07 (3)
    • Re: testing 6550 C on a hickok 6000 - unclewatts 13:25:44 03/02/07 (2)
      • Re: testing 6550 C on a hickok 6000 - jea48 17:32:02 03/02/07 (1)
        • Re: testing 6550 C on a hickok 6000 - Unclewatts 11:15:46 03/03/07 (0)

  Previous Page

Threads started on or before 2/28/07 are archived Here.
Threads started on or before 2/15/07 are archived Here.
Threads started on or before 1/31/07 are archived Here.
Threads started on or before 1/15/07 are archived Here.
Threads started on or before 12/31/06 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2007, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---