|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Amp stands and how much or any power conditioning on tube power amps? posted by dave c on March 14, 2007 at 17:31:50:
secondaries (1kva each) and then you can go with balanced AC!I'd recommend the separate circuit's most, mind.
I have one fro the sources and pre and one for the power amps. Get 'quiet' breakers - ELB + draw.
The best place for a small trannie-based filter is your turntable with a lamp attached to warm the cart and vinyl! then on the CDP, an isloating trannie is best there, and only THEN on the pre-amp.
WarmestTimbo in Oz
The Skyptical Mensurer and Audio ScroungerAnd gladly would he learn and gladly teach - Chaucer. ;-)!
'Still not saluting.'
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- in 240 Volt land like US dahn here a separte circuit is best idea, THEN a 2kva isolating trannie - or 2 by 115 volt - Timbo in Oz 19:50:32 03/18/07 (1)
- stands!!!???? MY amps are near the spkrs to keep wires short! - Timbo in Oz 20:07:48 03/18/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
