In Reply to: Hi steve posted by jneutron on June 13, 2003 at 18:28:34:
So then all the results posted are from a plug in card on a Mac?No, the Mac sound card was used in conjunction with the Mac The Scope software to do the FFT spectrum of the distortion output of the ST-1700B.
In other words, the cable being measured was connected at one end to the signal output (1kHz, 30mV) of the 1700B, the other end of the cable was connected to the input of the 1700B, and the distortion output (the resultant signal with the fundamental notched and gain applied) of the 1700B was fed into the input of the sound card on John's Mac and the Mac The Scope software did the FFT analysis.
se
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Hi steve - Steve Eddy 21:16:37 06/13/03 (7)
- Re: Hi steve - jneutron 21:29:18 06/13/03 (6)
- Re: Hi steve - john curl 21:49:47 06/13/03 (5)
- Re: Hi steve - Steve Eddy 21:53:23 06/13/03 (4)
- Guys??? - jneutron 22:08:39 06/13/03 (3)
- Re: Guys??? - Steve Eddy 22:57:39 06/13/03 (2)
- Re: Guys??? - jneutron 05:55:53 06/14/03 (0)
- Amen! (nt) - rcrump 00:50:50 06/14/03 (0)