I use 50/50 linseed/turpentine... about 20 coats, Old school beauty, here is shortcut...

Vintage Asylum

Classic gear from yesteryear; vintage audio standing the test of time.

Follow Ups Full Thread

Topic - Watco Danish Oil versus Linseed, etc.? - David Lawrence 11:59:11 01/26/22 (25)

I've recently used this from Howard products with good success - spindoctor 09:18:04 01/30/22 (7)

Thank You - belyin 22:00:52 01/31/22 (4)

Minimus 7 - M3 lover 08:59:47 02/01/22 (3)

RE: Minimus 7 - caffeinator 05:20:58 02/04/22 (1)

RE: Minimus 7 - Coner 13:18:34 02/04/22 (0)

RE: Minimus 7 - belyin 11:36:39 02/01/22 (0)

+1 Howards - M3 lover 10:39:48 01/30/22 (1)

RE: +1 Howards - David Lawrence 13:46:25 01/31/22 (0)

I use 50/50 linseed/turpentine... about 20 coats, Old school beauty, here is shortcut... - Cleantimestream 14:15:22 01/29/22 (5)

Can that be used over shellac or varnish? nt - alaskahiatt 17:43:20 01/29/22 (4)

No Sir, I wouldn't... shellac over linseed... no problem...shellac comes off easily-nT - Cleantimestream 22:01:00 01/31/22 (3)

That's what I figured. I have a 1919 Victor VVX victrola that is finished with - alaskahiatt 23:15:30 01/31/22 (2)

RE: That's what I figured. I have a 1919 Victor VVX victrola that is finished with - Cleantimestream 19:37:11 02/02/22 (1)

Thank you very much. nt - alaskahiatt 21:51:24 02/02/22 (0)

Watco is what I use to restore the Oiled Walnut cabinets. - kff 10:59:43 01/28/22 (2)

RE: Watco is what I use to restore the Oiled Walnut cabinets. - mark.korda@myfairpoint.net 16:23:58 01/28/22 (1)

The early M50 Picked up from original owners as they downsized - kff 04:57:52 01/29/22 (0)

you're talking two different needs - Story 10:48:09 01/28/22 (0)

RE: Watco Danish Oil versus Linseed, etc.? - Triode_Kingdom 05:50:06 01/28/22 (2)

RE: Watco Danish Oil versus Linseed, etc.? ditto - fredtr 15:50:21 02/04/22 (1)

RE: Watco Danish Oil versus Linseed, etc.? ditto - mhlumber65@gmail.com 17:22:45 02/05/22 (0)

IF you're going to use linseed oil - Phil_S 17:36:38 01/27/22 (0)

RE: Watco Danish Oil versus Linseed, etc.? - 6bq5 10:05:39 01/27/22 (0)

Watco works well ... - reelsmith. 05:01:30 01/27/22 (0)

RE: Watco Danish Oil versus Linseed, etc.? - Uncle Mike 04:21:55 01/27/22 (0)

Follow Ups

I use 50/50 linseed/turpentine... about 20 coats, Old school beauty, here is shortcut... - Cleantimestream 14:15:22 01/29/22 (5)

Can that be used over shellac or varnish? nt - alaskahiatt 17:43:20 01/29/22 (4)

No Sir, I wouldn't... shellac over linseed... no problem...shellac comes off easily-nT - Cleantimestream 22:01:00 01/31/22 (3)

That's what I figured. I have a 1919 Victor VVX victrola that is finished with - alaskahiatt 23:15:30 01/31/22 (2)

RE: That's what I figured. I have a 1919 Victor VVX victrola that is finished with - Cleantimestream 19:37:11 02/02/22 (1)

Thank you very much. nt - alaskahiatt 21:51:24 02/02/22 (0)

Post a Message!