|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: Watco Danish Oil versus Linseed, etc.? posted by David Lawrence on January 26, 2022 at 11:59:11:
Remove the old, dead, tired, dirty oiled finish with something like acetone (aggressive for removing the bad, dries quickly) lightly sand after raising the grain as needed and then Watco for a few coats letting it soak in a bit and buffed off. Follow with howard's feed and wax once a day (a week) once a week (month) and then once a month for a few times to get the oils back into the wood. Then annual cleaning and refresh if necessary.
I don't use Watco on top of other finishes.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Watco is what I use to restore the Oiled Walnut cabinets. - kff 10:59:43 01/28/22 (2)
- RE: Watco is what I use to restore the Oiled Walnut cabinets. - mark.korda@myfairpoint.net 16:23:58 01/28/22 (1)
- The early M50 Picked up from original owners as they downsized - kff 04:57:52 01/29/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
