|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: RE: Alternate Technique for BMS Mod posted by DHT 4 ME on June 19, 2007 at 20:35:24:
Hah Hah, We can't stop can we `,;^D
My original thought was to make a drill bit with a centre guide to fit the existing hole and cut a shoulder around the perimeter, then make a hard nylon cup with flange to drop in. But not wanting to invest the time without getting at least an approximate taste of the mod I took the quick and easy route.
Another possibility would be a nylon cup washer (used for screw heads) if the right size exists then the hole in the bottom could be filled away from the driver and then just dropped in.
Listening as I write this, I'd swear the mod is breaking in! Whatever it's doing, it sounds good. Focus is much better - more down to earth. Though the highs like the ring of the high e and b strings on a guitar are not quite as pretty.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Alternate Technique for BMS Mod - Ian L 22:04:37 06/19/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
