|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Dynaco SCA-35 posted by peteyodog on January 22, 2007 at 11:19:51:
I want to do the same thing with a pair of Scott 299Bs, also with ESLs (original Quads). I've been told it's not a problem. Although nobody's said so, I think gain matching the two channels would be important so one channel doesn't feed power to the other.One way around this would be to run the secondaries in series, but that would only work if nothing in the secondaries is referenced to ground, or the ground is lifted. That also means a minimum source impedance of 8 ohms, where lower is better.
What kind of 'stats are you running?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Dynaco SCA-35 - lipmanl 12:00:09 01/22/07 (2)
- Re: Dynaco SCA-35 - peteyodog 13:57:39 01/22/07 (1)
- A better(?) way to balance? - lipmanl 08:31:34 01/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
