|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: 6L6GC Push Pull with 8K opt posted by Burney on January 16, 2007 at 23:24:10:
Try triode strapping them with a plate voltage around 325VDC and around low 40something milliamps bias point. The driver will need to do about 20-22 volts RMS.Operated like this distortion will be about 1/4 (really less) of a tetrode connected class AB1 amp with that OPT impedance.
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- If you can live with 6 watts - Russ57 10:35:45 01/17/07 (1)
- Word. - Poindexter 18:41:44 01/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
