|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: 6L6GC Push Pull with 8K opt posted by Burney on January 16, 2007 at 23:24:10:
Take a look at the Heath W5 Circuit, it's floating around on the web, I think there is a link to the schematic from the Triode Electronics Site. This used an 8K output with KT66s but I substituted 6L6GCs for the KT66s and it sounded really nice. If you don't want to do a Williamson you can always borrow the output section and use a different input and driver. Just make sure the transformer can handle 25 - 30 watts.Charlie
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 6L6GC Push Pull with 8K opt - audio845 06:29:27 01/17/07 (1)
- Re: 6L6GC Push Pull with 8K opt - mqracing 08:11:05 01/17/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
