|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: Grounding Practices in Consumer Audio posted by Dan Banquer on March 8, 2004 at 11:36:55:
Dan:I think there are several categories/threads of conversation under this one topic. How about:
1) Circuit - Power Supply interaction. How should power and signal grounds interact? How do we take power supply currents (e.g. cap charging) into account?
2) Analog ground to chassis ground interaction. Where/how to connect the active circuitry to chassis ground. I have seen recommendations to connect input sockets to chassis ground, output sockets to chassis ground, power supply single ground point ("star") to chassis, etc...
3) Component-to-component interactions, and system connection to Earth/AC Mains ground. What's the systematic best practice?
BTW, it's interesting that there have been no other posts on this thread. I agree with you that this is a very important subject, but I guess we are alone.....
Peter
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Back to the topic... - Commuteman 12:48:33 03/09/04 (2)
- Re: Back to the topic... - Dan Banquer 16:55:23 03/09/04 (0)
- Re: Back to the topic... - jensw 13:53:01 03/09/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
