In Reply to: No, actually Let me help you out. posted by tomservo on November 13, 2022 at 08:01:39:
Directionality: It's All About Noise
07.01.16
If you've ever wondered about the arrows on AudioQuest cables, read any of our educational materials, or merely followed any of the online chatter regarding our products, perhaps you've wondered what this "directionality" thing is all about.
There is the widely accepted version of directionality: In most audio-grade shielded interconnects, as compared to standard coax, negative has its own internal conductor and the metal shield is attached to ground at only one end, thus defining the cable's directionality. Many cable manufacturers end their exploration of directionality there, going only as far as to mark their cables for directionality based on the relationship of shield to ground, but altogether neglecting conductor directionality. Because we believe in directing noise to where it can do the least harm, we, too, believe in the advantages of controlling for the attachment of the shield. In fact, long before we controlled for conductor directionality, AudioQuest interconnects were also controlled for direction based on the relationship of shield to ground.
Over the years, our understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. While we've always been keenly aware that directionality plays a significant role in the overall sound of any hi-fi system, we couldn't completely explain it. This was okay: We trust our own ears and encourage listeners to do the same. The test is easy enough: Simply listen, then reverse the direction of the cable, and listen again.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- AudioQuest explains directionality - geoffkait 12:08:01 11/13/22 (2)
- RE: AudioQuest explains directionality - tomservo 10:16:33 11/14/22 (1)
- Mechanism for directionality - geoffkait 10:43:23 11/14/22 (0)