|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: RE: You left out topology--the physical design and / or weaving. posted by 6bq5 on August 1, 2022 at 12:16:49:
I don't feel I have anything to offer, at least at this time, in loudspeaker cable design. Whereas I do think I have something to offer in digital cables.
There's a lot more going on inside Cardas Clear than in a classic co-axial conductor-and-shield cable.
I have no idea whether a classic co-axial conductor-and-shield loudspeaker cable would work, but I see at least two deal-breakers: 1) Skin effect on the core conductor; and 2) the cable would end up having very inconsistent physical and electrical resonances--centered around one "tuning point."
That's fine if you know that the only signal you are dealing with is digital pulses at 44.1kHz; but not so good for analog music.
ciao,
john
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- No no no no no - John Marks 14:51:54 08/01/22 (1)
- RE: No no no no no - 6bq5 14:59:46 08/01/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
