|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: PSU for 6P5 tubes posted by DHT 4 ME on March 31, 2006 at 21:53:10:
I looked at PSUII for approximate output voltage is all. I used .1uF @ 600 volts capacitors to ground after the first two chokes in parallel with the 30uF capacitors.Viewing on a scope, I did not find any appreciable ringing from the chokes & is dead quiet throughout the audio range as measured on the output.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: PSU for 6P5 tubes - Jimmy 04:49:27 04/01/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
