|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Single Ended KT88 posted by Jayme on January 25, 2007 at 20:04:22:
Unless you use fixed bias, or a comination bias scheme, the cathode resistor for a KT88 is going to be large wattage. Most designers will derate the resistor by a factor of five or more, so if there is 4 or 5 watts of actual dissipaition, a 20-25 watt part would be used. A chassis mounted power resistor is quite compact.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Single Ended KT88 - Jim Womble 03:36:59 01/26/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
