|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
Can I use three-pin XLR plugs and jacks to connect B+, filaments, and ground from power supply chassis to signal chassis? Let's say B+ around 350VDC and I'd use female jacks on both chassis to prevent most lethal screw ups.I guess what I'm wondering is if the usual Neutrik or equivalent can handle higher voltage. The component I've in mind draws maybe 25mA on B+.
Thanks.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Power Supply umbilical options? - slowburn 10:06:46 01/22/07 (12)
- Re: Power Supply umbilical options? - macm75 09:34:51 01/23/07 (0)
- Try CPCs from Allied - CarlyBoy 09:25:57 01/23/07 (0)
- Try Amphenol - wolfy62 18:27:21 01/22/07 (0)
- Anderson - Dave Garretson 13:26:08 01/22/07 (2)
- Re: Anderson - Dave Garretson 13:30:23 01/22/07 (1)
- Or Turck - Dave Garretson 13:48:39 01/22/07 (0)
- 3pin XLRs not an option - alternatives - andy evans 11:23:34 01/22/07 (0)
- Safer Suggestion - Cpwill 11:11:07 01/22/07 (0)
- Re: Power Supply umbilical options? - Lew 11:06:09 01/22/07 (2)
- Re: Power Supply umbilical options? - Rob Mercure 12:27:31 01/22/07 (1)
- Re: Power Supply umbilical options? - Lew 21:09:17 01/22/07 (0)
- Re: Power Supply umbilical options? - Chris O 10:58:41 01/22/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
