|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Great job posted by fatbottle on December 7, 2006 at 01:48:29:
I don't know enough about how your power is run over there. Here you have a hot and a grounded current carrying return (neutral). With a system like that going to a balanced 60-0-60 system makes a nice difference. First time my system was truly silent....no hum....even with phono stage and pre cranked to max. You really can't tell anything is on.In general I think the better the equipment the less it matters. Still I think you will like it. Of course to be proper the equipment should have a double pole switch and two fuses. Chances are your output voltage will be a little higher so you might need to make some small adjustments.
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I have been using balanced power for years - Russ57 04:44:12 12/07/06 (8)
- Re: I have been using balanced power for years - fatbottle 05:23:35 12/07/06 (7)
- In case you don't know, ... - cheap-Jack 08:49:28 12/07/06 (6)
- That is your opinion but it is 'apple and orange' as you would say - fatbottle 09:22:55 12/07/06 (5)
- I'll add one small but important point - Russ57 16:43:42 12/07/06 (4)
- Re: I'll add one small but important point - dave slagle 18:32:34 12/07/06 (2)
- Yea, unbalanced centre-tapped power won't help much. - cheap-Jack 08:52:36 12/08/06 (0)
- What would you propose as an experiment? - Russ57 04:39:08 12/08/06 (0)
- Re: I'll add one small but important point - fatbottle 17:03:01 12/07/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
