|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Woudl too much sand spoil the sound ? posted by cheap-Jack on July 27, 2006 at 08:24:57:
Hi ,
I use schottkeys with LC smoothing . If its single ended I use an LM1084 as a CCS feeding (or fed by) a CMC choke . Push pull ditto but LM1084 connected as a series reg . With both schemes the filaments have a bypass cap directly at the socket along with the CMC . Adding 'pre-reg' series regs , RC stages or CMCs in front of the CCS/series reg makes no difference to the sound . LM317 are the worst sounding reg for DHT's but are fine for IDHT's .cheers
...FB
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Woudl too much sand spoil the sound ? - fatbottle 08:58:53 07/27/06 (5)
- Re: Woudl too much sand spoil the sound ? - Stephen R 10:42:56 07/27/06 (4)
- Re: Woudl too much sand spoil the sound ? - fatbottle 23:15:55 07/27/06 (1)
- My experience is only with phono stage heaters. - Stephen R 11:10:15 07/29/06 (0)
- Tube Asylum Fokelore - Gusser 11:27:35 07/27/06 (1)
- Re: Tube Asylum Fokelore - Stephen R 11:03:46 07/29/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
