Follow Ups Full Thread

Topic - Switching Supplies for Heaters? - Gusser 10:34:16 07/25/06 (28)

• Laptop switchers as raw heater supplies - BBeck 09:03:26 07/28/06 (0)
• Here's what I am doing. - cheap-Jack 13:51:13 07/25/06 (25)
• Wow - extreme solution! - Gusser 15:51:16 07/25/06 (24)
• If I were you... - cheap-Jack 07:59:27 07/26/06 (23)
• Well after some research: - Gusser 10:27:32 07/26/06 (22)
• Re: Well after some research: - fatbottle 13:10:53 07/26/06 (17)
• Because this is 2006, not 1942 - Gusser 14:31:37 07/26/06 (4)
• Not the correct approach but up to you - fatbottle 15:41:16 07/26/06 (3)
• It's not built yet - Gusser 10:55:57 07/27/06 (2)
• Re: It's not built yet - fatbottle 23:42:06 07/27/06 (1)
• RE: 12AX7 Drive Capability - Gusser 09:40:22 07/28/06 (0)
• Bear in mind LM317 is safe for load less than 1.5A. - cheap-Jack 13:31:36 07/26/06 (11)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - fatbottle 13:52:41 07/26/06 (10)
• Woudl too much sand spoil the sound ? - cheap-Jack 08:24:57 07/27/06 (6)
• Re: Woudl too much sand spoil the sound ? - fatbottle 08:58:53 07/27/06 (5)
• Re: Woudl too much sand spoil the sound ? - Stephen R 10:42:56 07/27/06 (4)
• Re: Woudl too much sand spoil the sound ? - fatbottle 23:15:55 07/27/06 (1)
• My experience is only with phono stage heaters. - Stephen R 11:10:15 07/29/06 (0)
• Tube Asylum Fokelore - Gusser 11:27:35 07/27/06 (1)
• Re: Tube Asylum Fokelore - Stephen R 11:03:46 07/29/06 (0)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - radiance 17:31:21 07/26/06 (2)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - fatbottle 23:35:07 07/26/06 (1)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - jub_jugs 01:44:46 07/27/06 (0)
• Yes, good choice. - cheap-Jack 11:39:47 07/26/06 (3)
• Re: Yes, good choice. - fatbottle 07:28:08 07/27/06 (2)
• How're you so sure? - cheap-Jack 08:49:39 07/27/06 (1)
• Re: How're you so sure? - fatbottle 11:22:33 07/27/06 (0)
• I've done it - Ed Sawyer 13:20:55 07/25/06 (0)

Follow Ups

• Bear in mind LM317 is safe for load less than 1.5A. - cheap-Jack 13:31:36 07/26/06 (11)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - fatbottle 13:52:41 07/26/06 (10)
• Woudl too much sand spoil the sound ? - cheap-Jack 08:24:57 07/27/06 (6)
• Re: Woudl too much sand spoil the sound ? - fatbottle 08:58:53 07/27/06 (5)
• Re: Woudl too much sand spoil the sound ? - Stephen R 10:42:56 07/27/06 (4)
• Re: Woudl too much sand spoil the sound ? - fatbottle 23:15:55 07/27/06 (1)
• My experience is only with phono stage heaters. - Stephen R 11:10:15 07/29/06 (0)
• Tube Asylum Fokelore - Gusser 11:27:35 07/27/06 (1)
• Re: Tube Asylum Fokelore - Stephen R 11:03:46 07/29/06 (0)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - radiance 17:31:21 07/26/06 (2)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - fatbottle 23:35:07 07/26/06 (1)
• Re: Bear in mind LM317 is safe for load less than 1.5A. - jub_jugs 01:44:46 07/27/06 (0)