|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Auto and Fixed Bias on power tubes posted by HKL on July 4, 2006 at 19:42:35:
I used a pair of Solen 47uF @ 250 volt caps in parallel. I simply rounded up to 100uF nominal value in my post.A less expensive alternate are AeroVox polyproplyene 35uF motor run caps in those grey plastic cases. Common value are 35uF @ 250 volts. I find them on eBay for about $3 each or less in larger lots. Use three in parallel if chassis room is available.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Auto and Fixed Bias on power tubes - Jimmy 07:29:30 07/06/06 (1)
- Thanks for the info. That's helpful (NT) - HKL 19:20:25 07/06/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
