|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Auto and Fixed Bias on power tubes posted by Jimmy on July 4, 2006 at 07:16:43:
Hi,You brought out an interesting point with "... cathode bias was best on a 45 tube using a Solen cathode capacitor ..."
Could you advise what Solen cap you tried as I thought about the same make. The problem is we generally use a cap with high capitance, say, 100uF, for an output tube for better lows. Solen of that kind of capacitance would be very large (and expensive).
I believe I don't seem to find a 100uF Solen cap in the usual tube parts vendors but never really seek them out hard.
Cheers,
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Auto and Fixed Bias on power tubes - HKL 19:42:35 07/04/06 (2)
- Re: Auto and Fixed Bias on power tubes - Jimmy 07:29:30 07/06/06 (1)
- Thanks for the info. That's helpful (NT) - HKL 19:20:25 07/06/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
