|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: For a cheap cap to try out posted by Deco-Doctor on July 2, 2006 at 09:27:13:
But first I suggest you try and establish a base line. See where you measure a rising response. See what you hear. Then try the bigger caps and compare. Might be wise to bypass with a teflon as I'd imagine those caps might roll off a bit on the top end.Remember the grid choke's inductance isn't a fixed thing....its along the line of saying my speakers are 8 ohms....8 ohms where and when??? So you really have to do a little trial and error.
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Why not? - Russ57 10:20:23 07/02/06 (2)
- Re: Why not? - Paul Barker 12:19:15 07/02/06 (1)
- A comment about grid current - Russ57 16:37:32 07/03/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
