|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Re: Nak 480 arrived: how to fix it? posted by Marantzguy on October 11, 2005 at 17:22:24:
Richard,Thanks ever so much for your help. It really is much appreciated. Honest! I just had another look at the 480. There are two big motors in it: the bottom one does the dual capstans, with a wide belt on it. This worked no problem. The top one doesn't have a belt on it, but its brass shaft turns a small belt on a wheel which then runs the splined shafts which go into the holes in a cassette. All I did was clean this motor shaft, belt and splined shafts of any grease/dirt etc.
The FF and Rew then worked, then didn't until I tapped the buttons abit harder, then the play button worked. The tape is running and the VU meters are moving, so now all I have to do is plug the whole thing into the hifi and see what it sounds like :-)
I'll also see what the record button light does next...
As Hannibal once, said: 'I love it when a plan comes together!'Cheers,
Fraser
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Fixed it! - Dr Rock 02:03:26 10/12/05 (8)
- Re: Fixed it! - Marantzguy 10:16:49 10/13/05 (7)
- Re: Fixed it! - Dr Rock 01:24:06 10/14/05 (6)
- Bust it! - Dr Rock 01:25:20 10/14/05 (5)
- Re: Bust it! - Marantzguy 11:57:07 10/14/05 (2)
- Just one teensy weensy problem - Dr Rock 14:10:56 10/14/05 (1)
- Re: Just one teensy weensy problem - Marantzguy 16:55:53 10/14/05 (0)
- why stick only with 480 decks? - docw 10:28:03 10/14/05 (1)
- Re: why stick only with 480 decks? - Dr Rock 14:13:46 10/14/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
