In Reply to: RE: Thanks for your input posted by Skip Pack on October 14, 2024 at 08:44:55:
I did most of my vinyl digitizing at 24/96 which is the max supported by the HRT Linestreamer + ADC.I used Audacity on the Mac to capture one complete LP side and then the other side. I then used Audacity to break each side into tracks and manually input metadata for each track.
Most of my records were pretty clean but some had a loud pop or two. I would painstakingly "zoom in" on those peaks and manually suppress them with Audacity. I would leave the 'quieter' noise alone as it wasn't worth chasing down every little bit of it.
Man, that was tedious !!
I'm not familiar with Vinyl Studio but I suspect it offered some automation to make life easier than using Audacity.
What DSP did you apply and was it applied to the music file or applied real-time during playback?
Edits: 10/23/24
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Thanks for your input - AbeCollins 11:18:48 10/23/24 (2)
- RE: Thanks for your input - Skip Pack 09:47:43 10/24/24 (1)
- RE: Thanks for your input - AbeCollins 07:50:45 10/25/24 (0)