verity parsifals &M60's - jim 14:47:59 8/16/99 (0) Hum's gone, but there's still some noise left - Anand Mehta 09:34:46 8/13/99 (10) Re: Hum's gone, but there's still some noise left - mark 18:30:37 8/13/99 (9) Re: Hum's gone, but there's still some noise left - Anand Mehta 09:09:13 8/14/99 (8) Re: Hum's gone, but there's still some noise left - mark 13:57:31 8/14/99 (3) Re: Hum's gone, but there's still some noise left - Anand Mehta 08:53:21 8/16/99 (2) Re: Hum's gone, but there's still some noise left - Brian Walsh 15:16:18 8/16/99 (1) Re: Hum's gone, but there's still some noise left - Anand Mehta 19:24:47 8/16/99 (0) Re: Hum's gone, but there's still some noise left - Dan McLaughlin 10:54:53 8/14/99 (2) Re: Hum's gone, but there's still some noise left - mark 13:42:10 8/14/99 (1) Re: Hum's gone, but there's still some noise left - Dan 18:48:39 9/02/99 (0) A good warm up time - Dan McLaughlin 08:09:25 8/12/99 (6) Re: A good warm up time - Gary Baker 15:02:31 8/12/99 (0) Re: A good warm up time - mark 12:44:30 8/12/99 (2) Re: A good warm up time - Dan McLaughlin 12:55:29 8/12/99 (1) Re: A good warm up time - mark 13:44:04 8/12/99 (0) Re: A good warm up time - Anand Mehta 08:48:56 8/12/99 (1) My first NOS tubes - Anand Mehta 11:51:34 8/12/99 (0) M60 Owners: A question of Bass!! - Mike 13:23:30 8/09/99 (5) Re: M60 Owners: A question of Bass!! - Bryan P 21:08:01 8/19/99 (1) Re: M60 Owners: A question of Bass!! - steve 06:53:02 8/20/99 (0) Re: M60 Owners: A question of Bass!! - Bryan P 21:07:05 8/19/99 (0) Re: M60 Owners: A question of Bass!! - Phil Sieg 07:39:13 8/10/99 (0) Re: M60 Owners: A question of Bass!! - John Harper 15:06:53 8/09/99 (0) Crazy to think about Maggies? - Anand Mehta 20:57:07 8/07/99 (10) A simple matter of priorities... - mark 10:52:33 8/09/99 (1) Re: A simple matter of priorities... - Anand Mehta 13:40:32 8/09/99 (0) It's a no brainer - Phil Sieg 18:52:51 8/08/99 (3) Re: It's a no brainer - Anand Mehta 19:06:17 8/08/99 (2) Re: It's a no brainer - Gary Baker 16:36:34 8/11/99 (0) Well...... - Phil Sieg 06:29:06 8/09/99 (0) Re: Crazy to think about Maggies? - Harry Straub 17:05:04 8/08/99 (3) Re: Crazy to think about Maggies? - Edward Kerslake 06:48:09 8/09/99 (2) Capacitance increase (Re: Crazy to think about Maggies?) - Anand Mehta 07:56:22 8/13/99 (1) Re: Capacitance increase (Re: Crazy to think about Maggies?) - Edward Kerslake 15:59:32 8/19/99 (0) Anybody tried the JENA active load? - Dan McLaughlin 10:24:45 8/06/99 (2) Re: Anybody tried the JENA active load? - Steve Chang 18:47:48 8/09/99 (0) Re: Anybody tried the JENA active load? Yes - K. Mersereau 09:49:08 8/09/99 (0) Passive Preamps - Mark Carlson 13:42:55 8/03/99 (4) Re: Passive Preamps - Bryan Treen 10:36:04 8/10/99 (3) Re: Passive Preamps - Val 11:11:18 8/31/99 (0) Re: Passive Preamps - Marc Z 02:03:25 8/23/99 (0) Re: Passive Preamps - Ming Pan 11:39:26 8/10/99 (0) Atma-Sphere vs. c-j 11A? - EdS 12:59:33 8/03/99 (0) QUESTION FOR MARK GILMORE: RE : GRID STOP RESISTORS - J. NEAL 21:01:17 8/02/99 (3) Re: QUESTION FOR MARK GILMORE: RE : GRID STOP RESISTORS - mark 11:17:00 8/03/99 (2) Re: QUESTION FOR MARK GILMORE: RE : GRID STOP RESISTORS - John Harper 06:23:27 8/06/99 (0) Re: QUESTION FOR MARK GILMORE: RE : GRID STOP RESISTORS - J. NEAL 15:35:15 8/03/99 (0) Nice pic of M60's and SA-30 - Travis Franklin 19:03:55 8/02/99 (0) Bypassing the Bypassers - Wayne L Wright 13:46:22 7/31/99 (0) 12SX7GT available - M.P. 20:13:56 7/30/99 (1) Re: 12SX7GT available - mark 09:22:16 7/31/99 (0) Death of the 6SN7? - Dan McLaughlin 07:48:36 7/30/99 (0) Source for Illinois Capacitor (IC)? - Dan McLaughlin 07:41:35 7/30/99 (2) Re: Source for Illinois Capacitor (IC)? - Kurt Strain 10:50:00 7/31/99 (0) Re: Source for Illinois Capacitor (IC)? - mark gilmore 10:18:09 7/30/99 (0) LISTENER's SA-30's pics - Travis 05:24:58 7/30/99 (0) Re 60 HZ Hum - Bryan P 23:59:30 7/29/99 (3) New Driver Tubes worked for me (Was: 60 HZ Hum) - Anand Mehta 19:11:53 8/12/99 (0) Re: Re 60 HZ Hum - Harry S 04:35:43 7/30/99 (1) Re: Re 60 HZ Hum - Dan McLaughlin 07:23:13 7/30/99 (0) MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - J. NEAL 18:09:31 7/29/99 (8) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - J. NEAL 11:08:44 7/30/99 (0) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - mark gilmore 18:47:17 7/29/99 (6) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - David M. 13:39:39 7/30/99 (3) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - mark 14:26:40 7/30/99 (2) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - David M. 20:25:53 7/30/99 (1) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - mark 13:07:10 8/01/99 (0) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - John Harper 09:25:49 7/30/99 (1) Re: MESSAGE FOR MARK GILMORE : INDICATOR LIGHTS - mark gilmore 10:38:37 7/30/99 (0) Error in Assembly Manual - Driver Power Supply - Kurt Strain 21:46:44 7/27/99 (5) Re: Error in Assembly Manual - Driver Power Supply - Kurt Strain 22:41:37 7/28/99 (0) Corrections for Assembly Manual Posted - mark gilmore 19:33:02 7/28/99 (0) Re: Error in Assembly Manual - Driver Power Supply - Bill Stephens 17:22:18 7/28/99 (1) Re: Error in Assembly Manual - Driver Power Supply - Kurt Strain 18:50:11 7/28/99 (0) DC on the driver filaments? - Dan 12:05:39 7/27/99 (5) Re: DC on the driver filaments? - John Harper 15:40:48 7/27/99 (3) Wretched Excess - mark gilmore 18:12:59 7/27/99 (2) Re: Wretched Excess - John Harper 03:55:49 7/28/99 (1) Re: Wretched Excess - Dan 09:31:02 7/28/99 (0) Stereo'pile mentions SA-30! - Travis Franklin 10:23:00 7/26/99 (3) Re: Stereo'pile mentions SA-30! - Emil 14:35:57 7/26/99 (2) Re: Stereo'pile mentions SA-30! - mark gilmore 16:24:51 7/26/99 (1) Re: Stereo'pile mentions SA-30! - mark 13:32:34 8/01/99 (0) MA-1 - Steve 11:44:52 7/24/99 (0) Removing Output Tubes - Anand Mehta 09:20:55 7/24/99 (8) Re: Removing Output Tubes - bryan 14:00:16 7/24/99 (7) Re: Removing Output Tubes - Phil Sieg 17:44:07 7/26/99 (0) Re: Removing Output Tubes - mark gilmore 10:12:28 7/25/99 (5) Re: Removing Output Tubes - Anand Mehta 20:31:07 7/25/99 (4) Re: Removing Output Tubes - Anand Mehta 08:01:18 7/28/99 (3) Re: Adding Input Beers - bryan 21:59:17 7/29/99 (2) Re: Adding Input Beers - Anand Mehta 07:28:46 7/30/99 (1) ARG! grid resistors and wiring - Dan 23:12:03 7/23/99 (4) Re: ARG! grid resistors and wiring - Harry Straub 10:33:49 7/24/99 (3) Re: ARG! grid resistors and wiring - Dan 12:56:12 7/26/99 (2) What are the grid resistors doing, and upgrade them? - Dan 12:58:32 7/26/99 (1) Re: What are the grid resistors doing, and upgrade them? - Kurt Strain 17:44:53 7/27/99 (0) How would you describe the sonical Difference to a SE-Amp - Frank Rennekamp 07:57:13 7/21/99 (1) Re: How would you describe the sonical Difference to a SE-Amp - John Harper 15:09:46 7/22/99 (0) learning to solder - Emil 17:30:24 7/20/99 (4) Re: learning to solder - mark gilmore 12:30:32 7/21/99 (0) Re: learning to solder - Ray Shepherd 07:53:57 7/21/99 (2) Re: learning to solder - Phil Sieg 10:47:02 7/21/99 (1) Sorry, URL didn't make it (nt) - Phil Sieg 10:48:25 7/21/99 (0) CCS for M60 driver stage? - John Harper 06:22:37 7/18/99 (6) Re: CCS for M60 driver stage? - Kurt Strain 16:21:01 7/19/99 (0) Re: CCS for M60 driver stage? - mark gilmore 19:47:25 7/18/99 (4) Camille C4S - Phil Sieg 05:52:27 7/19/99 (2) Re: Camille C4S - mark gilmore 06:29:16 7/19/99 (1) Re: Camille C4S - Phil Sieg 06:39:34 7/19/99 (0) Re: CCS for M60 driver stage? - John Harper 04:17:39 7/19/99 (0) Atma-Sphere in the UK - HiFi News - John Harper 02:35:00 7/18/99 (1) Re: Atma-Sphere in the UK - HiFi News - Thorsten 13:35:10 7/19/99 (0) Atma-Sphere M-60 Mk II JENA LABS mods/upgrades. - Ken Mersereau 23:08:13 7/16/99 (2) Re: Atma-Sphere M-60 Mk II JENA LABS mods/upgrades. - bryan 20:03:47 7/17/99 (1) Re: Atma-Sphere M-60 Mk II JENA LABS mods/upgrades. - KM 20:10:27 8/11/99 (0) Has anyone tried .... - bryan 13:26:17 7/14/99 (17) Tried and True - mark gilmore 15:35:23 7/14/99 (16) Re: Tried and True - John Harper 01:03:37 7/15/99 (13) Re: Tried and True - mark gilmore 08:16:36 7/15/99 (12) Re: Tried and True - Dan McLaughlin 08:01:15 7/29/99 (0) Re: Tried and True - John Harper 02:47:28 7/16/99 (10) Re: Tried and True - Phil Sieg 07:21:25 7/16/99 (8) Re: Tried and True - Harry Straub 05:45:06 7/17/99 (0) Re: Tried and True - John Harper 07:34:37 7/16/99 (6) Re: Tried and True - Phil Sieg 09:28:19 7/16/99 (5) Re: Tried and True - Anand Mehta 08:53:09 7/22/99 (3) Re: Tried and True - Phil Sieg 05:34:38 7/24/99 (2) Re: Tried and True - Anand Mehta 09:12:25 7/24/99 (1) Re: Tried and True - Phil Sieg 07:02:52 7/25/99 (0) Re: Tried and True - Bill Stephens 13:26:27 7/17/99 (0) Re: Tried and True - mark gilmore 07:18:53 7/16/99 (0) Re: Tried and True - bryan 19:16:48 7/14/99 (1) Re: Tried and True - mark gilmore 08:19:52 7/15/99 (0)
