|
Hi-Rez Highway New high resolution SACD releases, players and technology. |
|
|
|
Hi-Rez Highway New high resolution SACD releases, players and technology. |
|
In Reply to: Re: There is another problem. At least on the Denons, bass mang. comes only with PCM conversion posted by Jim Cate on October 23, 2005 at 15:32:43:
Jim,
If you have an ICBM, you are half of the way there. You do not need or want bass management in the processor. The players in both of my systems (Esoteric DV-50, Denon 5900) have stereo outputs which are active whenever the analog 5.1 outputs are active. If that is the case with your player, simply run cables to the front L,R inputs of the ICBM and set the low pass filter appropriately (I use 40 Hz). Also, run your 5.1 LFE output to the LFE input of the ICBM. Blend the LFE and the front L,R signals in the ICBM and run a cable from the sub output to the LFE input on the processor. You are done.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Perfect bass management - Jim Pearce 06:59:33 10/24/05 (4)
- Re: Perfect bass management - Jim Cate 13:59:54 10/24/05 (1)
- Re: Perfect bass management - Jim Pearce 07:05:30 10/25/05 (0)
- Re: Perfect bass management - Kal Rubinson 07:46:18 10/24/05 (1)
- Re: Perfect bass management - Jim Pearce 10:02:09 10/24/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
