|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Are you daft posted by E-Stat on December 18, 2024 at 15:53:34:
It surely wasn't why ARC obfuscate the origin of parts and do not provide info on the type of device used
Like I said before you provided JUSTIFICATION for that practice which in the context of the whole thread was irrelevant.
The relevant question is. Does ARC obfuscate/hide the type of parts? You couldn't or wouldn't provide that answer and you don't have to know the answer.
The thread revolved around the issue of erasing the original markings of the components which makes unauthorized repairs difficult/impossible or forces the end user to use factory service or acquire factory supplied parts at prices of several magnitudes higher than the prices of those components in electronic supplier store. I did not have a big problem with this practice in most cases.
Abe had a major issue with it since he is a staunch proponent of the "right to repair"
He unfortunately chose ARC as an example of manufacturer which is totally transparent and does not follow this practice which is not correct.The Malaysia anecdote was an illustration of potential problems with your justification of ARC practice and your " I just send my amps to Minnesota and that's it:)
Edits: 12/18/24
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- What specific question was that? - Wojciech 16:52:32 12/18/24 (4)
- Ok - E-Stat 17:02:12 12/18/24 (3)
- Tony Evans , the maker of expensive phonostages - Wojciech 17:29:19 12/18/24 (1)
- Products survive - E-Stat 17:34:33 12/18/24 (0)
- Phono stages and line stages are full of tinny J-fets with logical color codes - Wojciech 17:14:52 12/18/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
