|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Simple W5M inquiry re: testing and power cable rewire posted by cdbecker on November 23, 2005 at 10:40:48:
like the Stokes board. The 6sn7 is an octal tube so you would have to repunch larger holes for the 8 pin socket instead of the 9pin miniature socket that is already there. Electrically you could use the same schematic and same value of resistors. Distortion wise the 6sn7 produces much less than a 12au7 by a great magnitude. It's a bigger tube with much larger conponents. Better not bite off more than you can chew if this is a first project. Good luck! Ray
"Polarities are seldom aware of their polarness." Prospero
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- If, you're a beginner I would stick with a kit... - grhughes 14:31:18 11/23/05 (2)
- Re: If, you're a beginner I would stick with a kit... - cdbecker 15:13:58 11/23/05 (1)
- There are many power pentodes that are similar to the KT66 BUT - grhughes 08:18:34 11/24/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
