So the patent says 43% when a 6L6 is used? nt

Follow Ups Full Thread

Topic - 6L6 monoblocks. - mwhouston 17:38:47 10/07/24 (67)

RE: 6L6 monoblocks. - xaudiomanx 16:32:55 10/09/24 (1)

RE: 6L6 monoblocks. - mwhouston 21:16:28 10/21/24 (0)

Are they ultralinear or triode? - Ralph 09:16:48 10/09/24 (59)

RE: Are they ultralinear or triode? - mwhouston 22:30:39 10/09/24 (53)

RE: Are they ultralinear or triode? - Tre' 17:54:05 10/10/24 (51)

A lot depends on where the screen tap is placed. - Ralph 12:16:05 10/11/24 (50)

RE: A lot depends on where the screen tap is placed. - elblanco 18:19:14 10/11/24 (45)

He's not completely correct on stuff he says in there, just so you know. - Ralph 09:47:24 10/14/24 (36)

RE: He's not completely correct on stuff he says in there, just so you know. - Tre' 15:45:40 10/14/24 (34)

Geez... - Ralph 08:23:07 10/15/24 (33)

RE: Geez... - Tre' 19:01:27 10/15/24 (32)

RE: Geez... - PakProtector 08:30:19 10/17/24 (3)

RE: Geez... - Tre' 09:10:23 10/17/24 (2)

RE: Geez... - PakProtector 03:58:27 10/18/24 (1)

RE: Geez... - Tre' 20:54:34 10/18/24 (0)

I got that - Ralph 09:02:45 10/16/24 (27)

RE: I got that - Tre' 17:55:26 10/16/24 (26)

So the patent says 43% when a 6L6 is used? nt - Ralph 08:29:11 10/17/24 (25)

RE: So the patent says 43% when a 6L6 is used? nt - Tre' 09:02:35 10/17/24 (24)

RE: So... - Ralph 09:19:32 10/17/24 (23)

RE: So... - Tre' 09:27:24 10/17/24 (22)

RE: 'substantially', 'equivalents' - Ralph 09:44:56 10/17/24 (21)

So what is the correct % for a 6l6? - Tre' 10:22:32 10/17/24 (20)

RE: So what is the correct % for a 6l6? - Ralph 11:13:37 10/17/24 (19)

This says that you are wrong. - Tre' 12:49:58 10/17/24 (12)

RE: No, it is consistent with the patent. - Ralph 13:30:47 10/17/24 (11)

RE: No, it is consistent with the patent. - Tre' 15:54:52 10/17/24 (10)

RE: No, it is consistent with the patent. - elblanco 18:53:18 10/17/24 (8)

Thank you. - Tre' 06:58:53 10/18/24 (7)

RE: Thank you. - Ralph 11:45:50 10/18/24 (6)

RE: Thank you. - Tre' 15:49:47 10/18/24 (5)

RE: Thank you. - Ralph 15:07:28 10/19/24 (4)

RE: Thank you. - tube wrangler 22:59:14 10/27/24 (1)

If you read the UL patent I think it says why :) nt - Ralph 11:35:44 10/28/24 (0)

RE: Thank you. - Tre' 18:15:29 10/19/24 (1)

I understand your logic - Ralph 11:11:57 10/28/24 (0)

they are 18.5% imp. 43% turns...-.-nt - elblanco 18:50:28 10/17/24 (0)

RE: So what is the correct % for a 6l6? - Tre' 11:53:46 10/17/24 (5)

It should. nt - Ralph 13:27:55 10/17/24 (4)

yep. nt - Tre' 16:46:59 10/17/24 (3)

and bias, tapping , and load resistance all must work simpatico.. - elblanco 18:57:40 10/17/24 (2)

and it originally comes from Blumlein...-. - elblanco 19:02:46 10/17/24 (1)

RE: and it originally comes from Blumlein...-. - tube wrangler 19:20:39 10/31/24 (0)

email him with your points of contention - elblanco 10:25:08 10/14/24 (0)

Thanks - Tre' 18:42:52 10/11/24 (7)

RE: Thanks - elblanco 11:37:21 10/14/24 (0)

RE: Thanks - PakProtector 06:26:37 10/14/24 (0)

RE: Thanks - elblanco 13:47:26 10/12/24 (4)

I believe that is just.... - Tre' 16:32:33 10/12/24 (3)

RE: I believe that is just.... - elblanco 16:53:35 10/12/24 (2)

Low and Hot? - FlaCharlie 07:47:03 10/14/24 (1)

RE: Low and Hot? - elblanco 10:42:34 10/14/24 (0)

We have been through this before - Tre' 17:19:45 10/11/24 (3)

Absolutely right - Triode_Kingdom 09:31:47 10/13/24 (2)

Whilst bashing the 6L6... - PakProtector 08:58:40 10/14/24 (1)

RE: Whilst bashing the 6L6... - Triode_Kingdom 09:34:12 10/18/24 (0)

That's the way to do it! nt - Ralph 08:33:46 10/10/24 (0)

RE: Are they ultralinear or triode? - mwhouston 22:26:39 10/09/24 (1)

RE: Are they ultralinear or triode? - mwhouston 22:00:30 10/27/24 (0)

did you spray paint the Hammer-tone chassis? - Story 13:14:05 10/09/24 (2)

RE: did you spray paint the Hammer-tone chassis? - mwhouston 22:29:46 10/09/24 (0)

I had a friend do the paint. - Ralph 13:22:12 10/09/24 (0)

RE: 6L6 monoblocks. - rage 07:41:50 10/09/24 (0)

RE: 6L6 monoblocks. - Jim D. 07:41:38 10/09/24 (1)

RE: 6L6 monoblocks. - mwhouston 22:27:40 10/09/24 (0)

RE: 6L6 monoblocks. - 6bq5 12:36:48 10/08/24 (1)

RE: 6L6 monoblocks. - mwhouston 20:16:55 10/08/24 (0)

Follow Ups

So the patent says 43% when a 6L6 is used? nt - Ralph 08:29:11 10/17/24 (25)

RE: So the patent says 43% when a 6L6 is used? nt - Tre' 09:02:35 10/17/24 (24)

RE: So... - Ralph 09:19:32 10/17/24 (23)

RE: So... - Tre' 09:27:24 10/17/24 (22)

RE: 'substantially', 'equivalents' - Ralph 09:44:56 10/17/24 (21)

So what is the correct % for a 6l6? - Tre' 10:22:32 10/17/24 (20)

RE: So what is the correct % for a 6l6? - Ralph 11:13:37 10/17/24 (19)

This says that you are wrong. - Tre' 12:49:58 10/17/24 (12)

RE: No, it is consistent with the patent. - Ralph 13:30:47 10/17/24 (11)

RE: No, it is consistent with the patent. - Tre' 15:54:52 10/17/24 (10)

RE: No, it is consistent with the patent. - elblanco 18:53:18 10/17/24 (8)

Thank you. - Tre' 06:58:53 10/18/24 (7)

RE: Thank you. - Ralph 11:45:50 10/18/24 (6)

RE: Thank you. - Tre' 15:49:47 10/18/24 (5)

RE: Thank you. - Ralph 15:07:28 10/19/24 (4)

RE: Thank you. - tube wrangler 22:59:14 10/27/24 (1)

If you read the UL patent I think it says why :) nt - Ralph 11:35:44 10/28/24 (0)

RE: Thank you. - Tre' 18:15:29 10/19/24 (1)

I understand your logic - Ralph 11:11:57 10/28/24 (0)

they are 18.5% imp. 43% turns...-.-nt - elblanco 18:50:28 10/17/24 (0)

RE: So what is the correct % for a 6l6? - Tre' 11:53:46 10/17/24 (5)

It should. nt - Ralph 13:27:55 10/17/24 (4)

yep. nt - Tre' 16:46:59 10/17/24 (3)

and bias, tapping , and load resistance all must work simpatico.. - elblanco 18:57:40 10/17/24 (2)

and it originally comes from Blumlein...-. - elblanco 19:02:46 10/17/24 (1)

RE: and it originally comes from Blumlein...-. - tube wrangler 19:20:39 10/31/24 (0)

Post a Message!