In Reply to: RE: He's not completely correct on stuff he says in there, just so you know. posted by Tre' on October 14, 2024 at 15:45:40:
He needs a different term! 'Ultralinear', ultra linear and ultra-linear are pretty well accepted to be the same thing.
BTW he didn't address the fact that for it to really be ultralinear, the taps have to be properly placed. The graph you showed earlier was of a 6L6 whose transformer designer was dodging the patent or working from a design that did (out of 'tradition').
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Geez... - Ralph 08:23:07 10/15/24 (33)
- RE: Geez... - Tre' 19:01:27 10/15/24 (32)
- RE: Geez... - PakProtector 08:30:19 10/17/24 (3)
- RE: Geez... - Tre' 09:10:23 10/17/24 (2)
- RE: Geez... - PakProtector 03:58:27 10/18/24 (1)
- RE: Geez... - Tre' 20:54:34 10/18/24 (0)
- I got that - Ralph 09:02:45 10/16/24 (27)
- RE: I got that - Tre' 17:55:26 10/16/24 (26)
- So the patent says 43% when a 6L6 is used? nt - Ralph 08:29:11 10/17/24 (25)
- RE: So the patent says 43% when a 6L6 is used? nt - Tre' 09:02:35 10/17/24 (24)
- RE: So... - Ralph 09:19:32 10/17/24 (23)
- RE: So... - Tre' 09:27:24 10/17/24 (22)
- RE: 'substantially', 'equivalents' - Ralph 09:44:56 10/17/24 (21)
- So what is the correct % for a 6l6? - Tre' 10:22:32 10/17/24 (20)
- RE: So what is the correct % for a 6l6? - Ralph 11:13:37 10/17/24 (19)
- This says that you are wrong. - Tre' 12:49:58 10/17/24 (12)
- RE: No, it is consistent with the patent. - Ralph 13:30:47 10/17/24 (11)
- RE: No, it is consistent with the patent. - Tre' 15:54:52 10/17/24 (10)
- RE: No, it is consistent with the patent. - elblanco 18:53:18 10/17/24 (8)
- Thank you. - Tre' 06:58:53 10/18/24 (7)
- RE: Thank you. - Ralph 11:45:50 10/18/24 (6)
- RE: Thank you. - Tre' 15:49:47 10/18/24 (5)
- RE: Thank you. - Ralph 15:07:28 10/19/24 (4)
- RE: Thank you. - tube wrangler 22:59:14 10/27/24 (1)
- If you read the UL patent I think it says why :) nt - Ralph 11:35:44 10/28/24 (0)
- RE: Thank you. - Tre' 18:15:29 10/19/24 (1)
- I understand your logic - Ralph 11:11:57 10/28/24 (0)
- they are 18.5% imp. 43% turns...-.-nt - elblanco 18:50:28 10/17/24 (0)
- RE: So what is the correct % for a 6l6? - Tre' 11:53:46 10/17/24 (5)
- It should. nt - Ralph 13:27:55 10/17/24 (4)
- yep. nt - Tre' 16:46:59 10/17/24 (3)
- and bias, tapping , and load resistance all must work simpatico.. - elblanco 18:57:40 10/17/24 (2)
- and it originally comes from Blumlein...-. - elblanco 19:02:46 10/17/24 (1)
- RE: and it originally comes from Blumlein...-. - tube wrangler 19:20:39 10/31/24 (0)