|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: SE to PP output transformer conversion question posted by Tanker on January 31, 2007 at 16:38:25:
...can emulate a PP transformer. Steve Deckert did it in the first version of his Torii EL34 PP. I can't vouch for how well it works or exactly how it is done, but probably the secondaries are in series, and the primaries also, with the connected inboard ends of the primaries going to ground as a virtual center tap, and the outboard ends of the primaries connected to the output tubes. You could search the Decware website for a white paper about it.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- A pair of SE output transformers... - JJ Triode 17:53:13 01/31/07 (5)
- Yes sure, TWO SE OPT's can be kluged... - Thomas Martens 11:38:16 02/01/07 (4)
- Re: Yes sure, TWO SE OPT's can be kluged... - Jim Womble 03:43:42 02/02/07 (3)
- Interesting observation, however... - Thomas Martens 07:56:21 02/02/07 (2)
- Re: Interesting observation, however... - Jim Womble 08:27:00 02/02/07 (1)
- Excerpts from Steve Deckert's white paper - JJ Triode 10:45:21 02/02/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
