|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: SE to PP output transformer conversion question posted by Tanker on January 31, 2007 at 16:38:25:
Absolutely will NOT work --at all. PP transformers can sometimes
be used as servicable SET OPTs at reduced current, BUT a Transformer
designed specifically for single-ended usage is constructed in a
very different fashion and cannot be used for PP applications.
I'm not aware of any clever ways around this.Also: I might mention that attempting to use PP OPTs for SET will
probably permanently magnetize the core and will require
degaussing before functioning optimally again in a PP circuit.Good Luck,
-T.M.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Unfortunately, NO. - Thomas Martens 17:02:59 01/31/07 (4)
- Re: Unfortunately, NO. - Eli Duttman 18:43:51 01/31/07 (3)
- Yes, a bit of an effort, and indeed, probably... - Thomas Martens 11:24:31 02/01/07 (2)
- Re: Yes, a bit of an effort, and indeed, probably... - Dave Cigna 12:24:05 02/01/07 (1)
- Re: Yes, a bit of an effort, and indeed, probably... - mqracing 15:46:22 02/01/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
