|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Not in my experience ... posted by oily on January 19, 2007 at 13:38:15:
There's more than one way but try taking the output from the plate of the bottom tube of a mu follower. If high voltage swing is needed to drive an output stage (without sacrificing linearity) then substitute the plate R with a choke. The interesting thing here is that the choke needn't be high quality nor have a very high inductance as would be the case with a simple choke loaded grounded cathode stage.Rgds,
Naz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Not in my experience ... - Naz 14:53:19 01/21/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
