|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: grid bias with batteries posted by Lew on December 8, 2006 at 09:19:04:
Hi Lew, I've been using Sony CR2477 Lithiums in my Phono with great success. These a large button cells measuring about 3.2V. After approx 2yrs they are still within a few hundredths of a volt of their measured voltage when new. From past experience with these batteries in some of our wireless security products I'd expect to get 10 years from them.In my application these sound great unbypassed, without any hint of added noise. Perhaps those that report better sonics bypassed are either using them in a series configuration or maybe it's just dependent on the battery type ... as I said the CR2477s are particularly large batteries.
Regards,
Naz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: grid bias with batteries - Naz 15:23:36 12/10/06 (1)
- Thanks, Naz - Lew 11:40:00 12/11/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
