|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: grid bias with batteries posted by Lew on December 8, 2006 at 09:19:04:
>>According to my reading of these Archives, if this is done with NiMh cells, the batteries will be continuously charged due to the small amount of grid current.<<NEGATIVE! NiCd or NiMH rechargeable cells go in the cathode circuit, where they are constantly being trickle charged. You use Lithium cells in the grid circuit and ignore the MINISCULE grid current. Li cells in grid circuit last YEARS.
Eli D.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: grid bias with batteries - Eli Duttman 10:24:49 12/08/06 (2)
- Gotcha! - Lew 12:32:18 12/08/06 (1)
- Re: Gotcha! - dave slagle 15:02:53 12/08/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
