|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Help with a Glowing Plate posted by darterboy on August 11, 2006 at 04:46:14:
Stott
I would use at least the 30 to 35 dollar metter from radio shack but yes you can use that and measure voltages..Keep in mind the negative voltage on the grid pin 2 and make sure its at least the same as the functioning sockets..You may have a leaky coupling cap or your grid resistor changed value.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Help with a Glowing Plate - MIchael Samra 22:17:19 08/21/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
