Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

[ Follow Ups ] Thread: [ Display  All  Email ] [ Tube DIY Asylum ]
[ Alert Moderator ]

Re: RCA/Rozenblit RIAA Line Amp idea

Here's the link to the scan on my web site:

http://shermanr.web.prw.net/Page0.htm

Just scroll down until you reach the big white schematic.

It looks messy but it's a cut and paste with the Xerox machine and
the scanner.

The voltage for the Rozenblit line stage is 265 Volts, then the 250 Volts for the RCA I plan to use two 125 Volt Zeners.

I may have to beef-up the filament transformer or may be able to adjust the 5 ohm series resistor to get the 12 volts needed using the 1 amp transformer as the total draw for the tubes will be 0.15 amps x 4 = 0.6 amps

The Rozenblit line stage uses the 12AU7 tube. Maybe I can re-design with an ECC99....

Hope you can read the .jpg drawing. I plan to pass this clean into a more readeable file format.

Thanks for the ideas.

This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]

Follow Ups Full Thread
Follow Ups
You can not post to an archived thread.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]