|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: CJ PV-10 Power Supply Mods, to remove current sinks? posted by unclestu52 on August 6, 2006 at 17:17:45:
Stu,I just looked at a picture I have of some one else's PV-10. Mine is definitely a little odd. Take a look at the image from my blog. If you look at the bottom left corder of the leftmost 20uF cap, you will see the resistors I am talking about.
The other thing I have that's different is that the output caps are oriented at 90 degrees to each other. I imagine this was to reduce crosstalk caused by putting both fo the output caps so close together.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: CJ PV-10 Power Supply Mods, to remove current sinks? - erik_squires@hotmail.com 18:22:23 08/06/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
