|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: Help me get a rough diagnosis of my receiver please. posted by BentValve on January 11, 2006 at 08:18:18:
1. Your preamp outs need to be re-soldered. Shouldn't be much.
2. I suspect you need an IC replaced. Estimated cost $75.Why am I so cocky and self assured? Recent experience, and an HK owner for several years.
If you are taking it in to be repaired, identify a master repair facility in your area on the Harman Kardon website. They are worth it.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Here is your detailed analysis. - bwkendall 18:27:57 01/11/06 (14)
- BTW, I recommend that you - bwkendall 18:33:12 01/11/06 (13)
- Re: BTW, I recommend that you - BentValve 13:21:34 01/12/06 (12)
- That is exactly what I would have predicted. - bwkendall 12:09:01 01/13/06 (11)
- RE: Power supply resistors - BentValve 13:50:01 01/13/06 (10)
- I must say, that is a first. - bwkendall 14:56:27 01/13/06 (9)
- Why should plug/unplug of ICs cause failure? nt - The Sound Guy 01:29:55 01/14/06 (6)
- Pins bend, sockets break, soldier joints pull - Silver Eared John 20:47:33 01/14/06 (0)
- It has been my experience - bwkendall 11:41:59 01/14/06 (0)
- Id like to know as well, I thought... - BentValve 06:19:18 01/14/06 (3)
- I did mean integrated circuit. - bwkendall 11:43:54 01/14/06 (2)
- Which IC were you thinking about? - BentValve 13:30:15 01/14/06 (1)
- On older models - bwkendall 09:28:20 01/15/06 (0)
- Re: I must say, that is a first. - BentValve 19:07:06 01/13/06 (1)
- I have an AVR-65 in my bedroom HT system. - bwkendall 11:42:52 01/14/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
