Home OTL Asylum

OTL, Output Transformerless Amplifier User Group.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ OTL Asylum ]
[ Alert Moderator ]

RE: Problem with my Atma-sphere amplifier

This is the same thing as pressing the BIAS Switch (for models that have the bias switch) when setting the BIAS. that switch disconnects one supply so you imbalance the output and with a VOM set to the amp scale across the speaker terminals in place of your load, you measure the current drawn through the meter. same difference. Pulling one supply fuse is like holding that switch down.

My First Gen Prototype Atma doesn't have the switch so i have to pull one supply fuse to set and check BIAS in that amp.


Zc


Edits: 06/10/08
This post is made possible by the generous support of people like you and our sponsors:
  Atma-Sphere Music Systems, Inc.  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]