![]() |
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Have you measured it to see how clean the output is under load? nt posted by Ralph on January 3, 2025 at 13:28:02:
My Tektronix scope is stored away in the basement and it's not exactly a modern portable unit ;-)
I did measure with my Fluke True RMS DMM which showed 121-VAC and 60.1 Hz under light load.
![]()
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Nah, I suppose I could but - AbeCollins 12:32:37 01/06/25 (7)
- Its the waveform you want to see. - Ralph 12:47:57 01/06/25 (6)
- Yes. Yes. And Yes. - AbeCollins 14:49:56 01/06/25 (5)
- RE: Yes. Yes. And Yes. - Ralph 10:00:20 01/07/25 (4)
- Is this what you had in mind? - AbeCollins 20:46:45 01/07/25 (3)
- Yes. nt - Ralph 08:57:05 01/08/25 (2)
- The results and the setup - pics - AbeCollins 13:35:04 01/08/25 (1)
- +1 sweet! nt - Ralph 13:48:26 01/08/25 (0)