|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
Recapped Legacy Speakers today,
NOS caps from my parts bin, Bennic, Dayton, and Solens,,
Removed added coil from woofer,.. woofer is now running full-range.
X-over was a easy upgrade, removed 32 and 6 uf caps with heat gun, then de-soldered from coil.
I replaced internal wiring (18awg?) with 14awg, ala "White Lightning".
Very easy to mod these.
I dropped the 1.3 ohm resistor, Seems much cleaner.
After listening for an hour or so, I am very happy with the sound improvement from the original "lytic" caps.
They sound like new vintage speakers now.
I have not changed the speaker terminals from clip to banana jacks
yet...all this took me 6 hours or so.
I want to thank every one for their expertise and encouragement,
My next project is refurbishing my Sansu au317.
What Silicone heat paste should I use?
Edits: 03/24/25
This post is made possible by the generous support of people like you and our sponsors:
Topic - Advent Lrgacy Redux - walkstoslow 18:33:54 03/24/25 (12)
- Sansui AU317 - Inmate51 08:12:40 03/27/25 (2)
- +1 for Sansui - M3 lover 09:13:39 03/27/25 (1)
- RE: +1 for Sansui - Inmate51 16:38:05 03/27/25 (0)
- RE: Advent Lrgacy Redux - seancuster71@gmail.com 03:18:16 03/27/25 (2)
- DOWSIL™ 340 Heat Sink Compound - walkstoslow 13:28:51 03/31/25 (1)
- RE: DOWSIL⢠340 Heat Sink Compound - seancuster71@gmail.com 15:00:28 04/02/25 (0)
- Chimed in to say... - Presto 10:13:28 03/25/25 (4)
- Placement - suggest possibly the most important, height of speaker - Edp 08:12:15 03/26/25 (2)
- what about tilt and knee function?/NT - walkstoslow 10:54:30 04/01/25 (0)
- height of speaker - walkstoslow 10:44:46 04/01/25 (0)
- RE: Chimed in to say... - walkstoslow 13:10:14 03/25/25 (0)
- RE: Advent Legacy morror imag baffles... - walkstoslow 19:36:41 03/24/25 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
