I moved the speaker locations so the whizzer drivers are on the inside, and

Vintage Asylum

Classic gear from yesteryear; vintage audio standing the test of time.

Follow Ups Full Thread

Topic - Grille covers on Electro-Voice Leyton Speakers - alaskahiatt 14:10:19 11/15/23 (11)

Maybe? - mhardy6647 15:30:51 11/15/23 (10)

Mark, after opening up the speaker, I discovered that I actually have - alaskahiatt 14:41:46 11/18/23 (5)

neat! That is a real EV cone tweeter - mhardy6647 19:19:42 11/18/23 (4)

The tweeter only had numbers on it and no manufacturer's name. I take - alaskahiatt 22:19:25 11/18/23 (3)

check to see if the numbers are a manufacturers EIA code - Story 05:25:13 12/08/23 (1)

Thanks. Electro Voice is 649, but that number is not found on the driver. nt - alaskahiatt 15:23:01 12/08/23 (0)

it may well - mhardy6647 19:06:37 11/21/23 (0)

Not sure what drivers I have, as I cannot remove the grille cloth. Also, - alaskahiatt 22:37:40 11/15/23 (1)

I moved the speaker locations so the whizzer drivers are on the inside, and - alaskahiatt 20:35:21 11/16/23 (0)

oh, the cane grilles do come off... - mhardy6647 15:34:35 11/15/23 (1)

I suspect nails too, and I have seen that on either Pioneer or Sansui. nt - alaskahiatt 22:41:09 11/15/23 (0)

Follow Ups

I moved the speaker locations so the whizzer drivers are on the inside, and - alaskahiatt 20:35:21 11/16/23 (0)

Post a Message!